Brodit 854933 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Brodit 854933 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
29 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 854933
854933 ProClip
Angled mount, ONLY for models without a built-in navigation system.
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a hansfree set etc. Safe and convenient - always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288549330
Item no 854933 fits:
Acura ILX 13-15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures carefullt before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Press the angled edge on the lower side of the ProClip into the gap or slot above the CD
player.
2. Push firmly forward on the faceplate so the ProClip flexes forward. At the same time with your other hand
press down on the forward angled edge. Press forward and down until the angled edge clips into the seam just
before the information screen.
3. Press down on the forward edge to ensure the edge is securely in place.
4. The ProClip is in place.
2(2)
/