Starline STAR-R6-ECO Owner's manual
- Category
- Motorcycle Accessories
- Type
- Owner's manual
Starline STAR-R6-ECO is a micro relay unit with two integrated relays that can be used with various StarLine security systems. It provides engine blocking and other security features, and can be hidden in a car's original wiring for added protection. Here are some of its key features and possible use cases:
- Compact size: The STAR-R6-ECO's small size allows it to be easily hidden in a car's wiring, making it difficult for thieves to find and disable.
- Waterproof housing: The unit's waterproof housing protects it from moisture and other harsh conditions, ensuring reliable operation even in extreme environments.
Starline STAR-R6-ECO is a micro relay unit with two integrated relays that can be used with various StarLine security systems. It provides engine blocking and other security features, and can be hidden in a car's original wiring for added protection. Here are some of its key features and possible use cases:
- Compact size: The STAR-R6-ECO's small size allows it to be easily hidden in a car's wiring, making it difficult for thieves to find and disable.
- Waterproof housing: The unit's waterproof housing protects it from moisture and other harsh conditions, ensuring reliable operation even in extreme environments.
Installation Manual
WIRELESS UNIT
www.alarmstarline.com
R6 ECO
GENERAL PROVISIONS
REGISTRATION OF RELAY UNIT
INTO SECURITY SYSTEM
The digital micro relay unit StarLine R6 ECO is intended to
protect from a car theft by means of engine blocking.
StarLine R6
ECO provides following benets:
• compact size allows to hide it in a car original wiring;
• waterproof housing and high quality components let it t in
any place of engine compartment in a high moisture and
temperature conditions;
• communication with a security system main unit is carried out
via Bluetooth Smart (BLE) hack-proof secured protocol;
• embedded accelerometer detects a motion to activate engine
blocking.
If StarLine R6
ECO is supplied separately from security systems,
so it should be registered into main unit memory.
Registration is carried out via wireless Bluetooth Smart (BLE)
channel in following steps:
1. Disconnect input power from relay unit.
2. Interconnect the white-black and yellow-red wires.
3. Switch the security system into registration mode.
4. Connect input power to the relay unit.
5. Conrmation on successful registration will follow within 10
sec from security system.
6. Disconnect the white-black and yellow-red wires.
REGISTRATION INTO SECURITY SYSTEMS
StarLine A96, AS96, B96, D96, E96, E96BT, S96,
X96(v2)
1. Disconnect input power from relay unit.
2. Interconnect the white-black and yellow-red wires.
3. Press the service button 7 times.
4. Turn ignition On.
5. 7 LED ashes and siren signals will conrm enter to registra-
tion mode.
6. Connect input power to the relay unit.
7. In 10 sec the successful registration will be conrmed with 2
LED ashes and siren signals.
8. Disconnect the white-black and yellow-red wires.
The micro relay unit can be used with the following
security systems: StarLine X96/X66, A96/B96/D96,
StarLine AS96, StarLine E96/E66, StarLine S96/S66,
StarLine i96CAN
Up to 4 relays can be registered to one main unit
The relay unit functionality described in this manual
corresponds to the rmware version 1.1.0. If you upgraded
device to the later version, nd the actual manual at
help.starline.ru.
StarLine R6 ECO has 2 integrated relays. For each relay a blocking
interval and delay can be congured. It makes possible to
perform an engine blocking with 2 independent circuits
interruption.
The unit is always in wireless connection with a main security
system unit and receives commands on engine blocking from it.
In case of connection loss for any reason in a guard mode the
relay unit shall independently block an engine.
Parameters Values
Input voltage 5...18 V
Power consumption
with relays O 1 mA
Power consumption
with relays On 28 mA
Permissible each relay
load current up to 500 mA
Working temperature range 40 … 105 C
Protection level IP54
Dimensions 62,5×14×10,5 mm
version 1.1.0
TECHNICAL FEATURES
GENERAL INSTALLATION
REQUIREMENTS
CONNECTION DIAGRAM
StarLine R6 ECO is dedicated to t in vehicles with 12V onboard
power supply.
Place it in a hidden place (for example, inside original wiring in
engine compartment), avoiding contact with the moving parts
of a vehicle.
Fix the unit with straps.
Power circuits connection
The red (+12V) and black (ground) wires are used for power
supply connection.
The black ground wire must be connected rst to the factory
screw or nut on the body. The wire should be crimped into the
matching size electric clamp before xing under screw or nut.
Do not use tapping screws and other non-original fasteners for
the ground wire connection.
Cover the place of connection with anti-rust grease.
Connect the red +12V wire to original constant power supply
circuits wires with cross section not less than 2 sq.mm or
connect directly to the main battery clamp.
The red wire should be connected through the fuse from
delivery set.
NO contact relay 1
NC contact relay 1
Registration input
Power +12V
Common contact relay 1
NO contact relay 2
NC contact relay 2
Ground
Not used
Common contact relay 2
white-blue
blue-black
yellow-red
red
blue
white-green
green-black
white-black
black
green
In case of both relays contacts parallel connection
the max load current shall not exceed 1A.
The manufacturer reserves the right to change
the design and elements without prior notication
Manufacturer:
ScPA “StarLine” LLC
9A, Komissara Smirnova str.
194044, Saint-Petersburg, Russia
Tel. +7 812 3263333
-
1
Starline STAR-R6-ECO Owner's manual
- Category
- Motorcycle Accessories
- Type
- Owner's manual
Starline STAR-R6-ECO is a micro relay unit with two integrated relays that can be used with various StarLine security systems. It provides engine blocking and other security features, and can be hidden in a car's original wiring for added protection. Here are some of its key features and possible use cases:
- Compact size: The STAR-R6-ECO's small size allows it to be easily hidden in a car's wiring, making it difficult for thieves to find and disable.
- Waterproof housing: The unit's waterproof housing protects it from moisture and other harsh conditions, ensuring reliable operation even in extreme environments.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Starline R7 Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Olympia DC 200 Owner's manual
-
Motorola RF Amplifier Quick start guide
-
-
Motorola BLE Series Operating instructions
-
-
Washtech XP User manual
-
-
-
-
