2) Reboot the program to enter in ENG interface
3) Click “Create settings file” in sidebar
5) In device list window select ”Generation 6” (or “Immobilizer”, “Moto-immobilizer” for instance)
Select particular model series and click “next” (arrow) button
7) Then you will see the main configuration menu with several sections
Channels and CAN – configuration of programmable channels (inputs / outputs) on the left side and
CAN * supported options on the right side.
(* - visible for selected car only in connected device configuration, check supported options for every brand
and model at can.starline.ru)
General Settings – configuration of the regular operation modes and owner authorization settings
Engine Start – configuration of remote engine start settings
Automatic engine start – configuration of automatic engine start function by preset terms
(temperature, timer, battery voltage)
Engine blocking and status output – configuration of digital and analogue engine blocking settings
Flexible logic – configuration of various individual programs on the base of @StarLine Flexible logic:
Event – Condition - Action
Telematics – configuration of network, monitoring and notifications settings
Sensors settings – adjusting Shock / Tilt / Motion / Temperature sensors sensitivity and operating
modes
Diagnostics – convenient visual tool to monitor security system operation and car statuses in real
time in regard with configured settings
Installer handling guide – convenient interface to record and print the list of particular installation
settings made
8) Configuration can be saved to file and then used at any time for the similar system setup.
/