Energenie EG-PM1W-001 User manual

USER MANUAL

HANDBUCH

HANDLEIDING

MANUEL DESCRIPTIF

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

КЕРІВНИЦТВО КОРИСТУВАЧА

EG-PM1W-001 WIFI SMART HOME SOCKET

All brands and logos are registered trademarks of their respective owners

2

EG-PM1W-001 WIFI SMART HOME SOCKET

WIFI smart home socket

Programmierbare Smart Home WLAN

Steckdose

WIFI Smarthome Socket

WiFi prise de courant de la maison

intelligente

WiFi розетка для умного дома

Wi-Fi розетка для розумного будинку

 Do not plug several sockets in line

 Do not use if covered

 De-energized only if power plug is unplugged

 NEVER connect appliances which do not allow unattained

operation!

All brands and logos are registered trademarks of their respective owners

3

EG-PM1W-001 WIFI SMART HOME SOCKET

1. Introduction

Thank you for your purchase of this EnerGenie WiFi smart home

socket. Your EG-PM1W-001 is an advanced power socket with smart

power management features. You can control the socket via your local

WiFi network, the internet, or the PowerMan app.

Because you can control the smart socket via several different

interfaces (power manager interface with secure data transfer, embedded

webserver and energenie.com cloud service), it can be integrated into

most smart home solutions.

With your free personal user account at our EnerGenie.com cloud

server, you can manage your EG-PM1W-001 from all over the world with

any internet browser. With your free user account, you also get access to

our free PowerMan app for controlling the EG-PM1W-001 (available for

iOS and Android smartphone or tablets).

The EG-PM1W-001 also has a WiFi repeater function, which enables

it to extend the range of your home or office WiFi network.

The smart socket can be switched on/off manually, via a timer

schedule, or by different programmable events. The timer schedule is

stored inside the device itself (hardware schedule only), so the smart

socket does not need any network connection to execute the timer

schedule.

All brands and logos are registered trademarks of their respective owners

4

EG-PM1W-001 WIFI SMART HOME SOCKET

1.1. Features

 Intelligent programmable WiFi power socket with built-in WiFi-

repeater function

 Switch connected devices on or off with your computer, tablet or

smart phone

 Fully featured programmable timer schedule possibilities

 Link on/off switching of the socket to certain software events or

Windows start-up/shutdown

 Easy access from any computer within your home network (via your

Internet browser)

 With your free EnerGenie.com user account you will get easy

worldwide access to your EG-PM1W-001, via internet or the free

PowerMan app

 Built-in 300 Mbps WiFi-repeater for improved range of your wireless

network

1.2. Specifications

 High-speed 300Mbps WiFi 802.11 b/g/n interface

 WLAN repeater mode

 Input voltage: up to 250 VAC, 50 – 60 Hz

 Maximum load current: 16 A

All brands and logos are registered trademarks of their respective owners

5

EG-PM1W-001 WIFI SMART HOME SOCKET

 Maximum power consumption: 2.5 W

 Hardware schedule features:

o Maximum number of independent hardware schedule events

– 45 per socket

o Time setting accuracy in seconds

o Combine repeating and one time events

 Timer accuracy: less than 2 seconds error per day provided that

power is always present. Otherwise there can be an additional error

of up to 2 seconds for each time the device is turned off.

 Indoor use only

 Dimensions: 135 x 92 x 78 mm

 Net weight: 0.35 Kg

All brands and logos are registered trademarks of their respective owners

6

EG-PM1W-001 WIFI SMART HOME SOCKET

1.3. Hardware requirements

 Local area network with WLAN router

 Any Internet-enabled computer connected to the local area network

 Computer running Windows® 2000/XP/7/8 is required for using the

Power Manager software (use of this software is not compulsory)

1.4. Package contents

 EG-PM1W-001

 User manual and Quick installation guide

 CD with Power Manager software for Windows

All brands and logos are registered trademarks of their respective owners

7

EG-PM1W-001 WIFI SMART HOME SOCKET

2. Indicators and controls of EG-PМ1W-001

ON indicator

ON/OFF switch

Figure # 1

Reset button

(pinhole)

All brands and logos are registered trademarks of their respective owners

8

EG-PM1W-001 WIFI SMART HOME SOCKET

 ON/OFF switch – toggles the socket output between on and off

 ON indicator – shows a light if the socket is ON, otherwise the socket

is OFF.

 Reset button (pinhole) – when pressed and held for 5 seconds, the

socket’s WLAN configuration reverts to its default settings (See default

settings list in p.4.5).

3. Installation

 It is strongly recommended to avoid installing the device in damp or

wet places.

 EG-PM1W-001 should be connected to the European AC wall socket

of the standard DIN 49 440.

3.1. Easy setup of the EG-PM1W-001 with the PowerMan app

 Connect your EG-PM1W-001 to the power socket and wait around 20

seconds for socket initialization.

 Press the reset button in the pinhole on the front using a blunt narrow

pin (e.g paperclip) and keep pressed for 5 seconds to reset the EG-

PM1W to the defaults. Wait another 20 seconds for socket

initialization.

 Meanwhile download and install the free PowerMan app on your

smartphone or tablet PC:

All brands and logos are registered trademarks of their respective owners

9

EG-PM1W-001 WIFI SMART HOME SOCKET

o For iPhone 4 (or higher) :

https://itunes.apple.com/ru/app/powerman/id486183471

o For Android OS 2.1.x (or higher):

https://play.google.com/store/apps/details?id=peacemaker.en

ergeniepowermanager

 Create your free user account on energenie.com cloud server by

following the instructions in the app itself, or sign in to your existing

account.

 Add the new EG-PM1W device by following the instructions in the

app itself.

3.2. Setting up the EG-PM1W-001 as an Access Point (using web

browser)

 Connect your EG-PM1W-001 to the power socket and wait around

20 seconds for socket initialization.

 Your EG-PM1W-001 can now be switched on and off by means of

the ON/OFF switch. If the ON indicator is green, this means that the

socket is now live and connected to the power supply.

 Open up a web browser in your WiFi-enabled computer or

smartphone.

 To connect to the EG-PM1W-001 WiFi network:

o Connect to the network with SSID “EG-PM1W_xxxxxx”, where

“xxxxxx” is last 6 digits of the EG-PM1W-001 MAC address.

o No password is needed to connect.

All brands and logos are registered trademarks of their respective owners

10

EG-PM1W-001 WIFI SMART HOME SOCKET

o Ensure that the option Get the IP address automatically is

enabled on your PC.

 Go to http://egsetup.net (or http://10.10.10.254) in your browser.

 Input login “admin”, password “admin” in the login page (see Figure

#2) and click Sign In. You should now be connected, and able to

manage the EG-PM1W-001 via the web interface. Initially, the EG-

PM1W-001 is in “access point” mode. If you want to change to

“repeater” mode follow the steps described in the following section

(3.2).

3.3. Setting the WiFi repeater mode (using web browser)

 Log into the EG-PM1W-001 web interface, as described in section

3.2.

 Select Wireless Network in the left menu (see Figure #3).

 If it is required by the WLAN network configuration, choose Static IP

for the Network type setting and fill in the IP address, mask,

gateway, DNS manually, otherwise select the DHCP Client option to

allow the network to assign the IP address automatically. The DHCP

Client option is suitable for most users.

 Click Site survey.

 In the “Wireless WAN (Client) Setting” page select the SSID of your

network, and enter your Passphrase (see Figure #4).

All brands and logos are registered trademarks of their respective owners

11

EG-PM1W-001 WIFI SMART HOME SOCKET

 In order to ensure that the repeater network is secure, and to allow

for seamless roaming between the host and repeater’s network, it is

recommended to use the same encryption type and password of the

host WLAN network. In this case, leave Set the AP security with this

information option checked.

 Click “Apply”. At this point, the EG-PM1W-001 should be in WiFi

repeater mode. The default SSID is “EG-PM1W_xxxxxx”. You can

change the repeater’s SSID to the SSID of your host network, WiFi

channel, or encryption type and password in the Wireless Network

page.

3.4. Power Manager software installation for Windows PC

 Before setting up the Power Manager software, you need to

configure the access to the EG-PM1W-001 web interface (see

sections 3.1 - 3.2).

 Insert the Power Manager CD into the PC CD-ROM drive and run

setup.exe. If your laptop does not have CD-ROM player, just

download the latest software from www.energenie.com and run the

installer package.

 In order to connect the EG-PM1W-001 with the Power Manager

software, you need the IP, PM port and PM password settings. You

can find the IP in the Wireless Network page in the web interface.

You can also find the IP by using the LAN find utility in the Power

Manager software. The PM port and PM password need to be set in

All brands and logos are registered trademarks of their respective owners

12

EG-PM1W-001 WIFI SMART HOME SOCKET

advance in the System page. Usually the PM port value is 5000. The

password shall contain between 1 and 8 characters.

 In Power Manager, Select Device->Add device from the main menu.

Enter the device name, IP address, PM port, PM password, and

then click OK. After a few seconds, the EG-PM1W-001 icon will

appear in the main window and the connection status will turn green.

EG-PM1W-001 is now connected and can be managed. Note,

antivirus or firewall software may block connection to the EG-PM1W-

001. Please, configure your antivirus/firewall to allow connections to

the IP address and port of your EG-PM1W-001.

3.5. Setting up the EG-PM1W-001 for use with the EnerGenie.com

free user account

 Log into the EG-PM1W-001 web interface and go to the Socket

page.

 Click Register. The energenie.com login page will be opened in a

new browser window.

 Click New account or login to your existing account. Complete the

form in newly opened page. After clicking Register, a new page with

your EG-PM1W-001 device will appear. Click the device icon to

open the device page from where you may control the device.

 Return to the Socket page and click Activate. Wait a few seconds

until the status under the button shows “Connected and Activated”.

All brands and logos are registered trademarks of their respective owners

13

EG-PM1W-001 WIFI SMART HOME SOCKET

The EG-PM1W-001 can now be managed via your user’s account

on EnerGenie.com.

4. The web server

Your EG-PM1W-001 is equipped with a web-server which allows

managing the device using any web browser such as Internet Explorer,

Firefox, Chrome, etc.

4.1. Web-server login

To access the web-server of the EG-PM1W-001, just open Internet

Explorer (or other browser) and input http://egsetup.net or the IP address

of your EG-PM1W-001 (for example http://192.168.1.241).The login page

will then be displayed (see Figure #2).

Javascript must be enabled in your Internet Explorer (or other

browser) settings.

Figure # 2

All brands and logos are registered trademarks of their respective owners

14

EG-PM1W-001 WIFI SMART HOME SOCKET

The default login is: username: admin password: admin

It is recommended to change the password on the System page after

the first login. After successfully logging in, you will arrive at the Socket

page

4.2. Socket

Through the Socket page (see Figure #3) you will be able to see the

status of your manageable socket and switch the socket on and off

manually.

The system time shows the time currently set on the device. It is used

for the execution of the time schedule.

The Network section shows you the current WLAN network settings

and status.

The Socket page also allows you to set up how the EG-PM1W-001

can be accessed and managed over the internet via EnerGenie.com

when there is no static external IP address. Through the EnerGenie.com

interface, it is possible to switch the device on and off, as well as set or

check the time schedule. Setting up this free service is described in

section.3.4 .

All brands and logos are registered trademarks of their respective owners

15

EG-PM1W-001 WIFI SMART HOME SOCKET

Figure # 3

All brands and logos are registered trademarks of their respective owners

16

EG-PM1W-001 WIFI SMART HOME SOCKET

4.3. Power Schedule

On the Power Schedule page (see Figure #4) it is possible to set up

the time schedule for switching the socket ON or OFF. You can add or

remove up to 45 schedule events (use + and – buttons). For each event,

you can set the date and time when it occurs and select whether it is

executed only once or periodically. The entire schedule can be cleared by

clicking the Clear schedule.

Although the hardware schedule is saved when the device is powered

off, the local time will be reset. Therefore, for proper schedule execution

after powering off, selecting the NTP enable option is highly

recommended (it is enabled by default). Otherwise the local time will

need to be restored manually after each “Power Off” event.

All brands and logos are registered trademarks of their respective owners

17

EG-PM1W-001 WIFI SMART HOME SOCKET

Figure # 4

4.4. Wireless Network Settings

On the Wireless Network page (see Figure #5) you can set up the EG-

PM1W-001 IP and WLAN settings. In the Basic Network section, you can

All brands and logos are registered trademarks of their respective owners

18

EG-PM1W-001 WIFI SMART HOME SOCKET

choose whether to connect automatically through DHCP or provide a

static IP address. In the Wireless AP (Access Point) section, you can

configure the WLAN network settings assigned to EG-PM1W-001. Newly

chosen settings will be implemented after clicking Apply.

These settings also work when the device is in Repeater mode

provided that a connection to the host AP is established. To set up this

connection, click Site survey. In the new page select the SSID option

corresponding to the host AP from the list. You can rescan SSIDs by

clicking Refresh. The security settings for the repeater should usually be

the same as those for the host AP. To copy these settings from the host

AP, leave the Set the AP security with this information option checked.

When selected, input the pass phrase and click Apply. The EG-PM1W-

001 will connect to that host AP. You will then need to reconnect your

client to the EG-PM1W-001 SSID.

All brands and logos are registered trademarks of their respective owners

19

EG-PM1W-001 WIFI SMART HOME SOCKET

Figure # 5

All brands and logos are registered trademarks of their respective owners

20

EG-PM1W-001 WIFI SMART HOME SOCKET

Figure # 6

Energenie EG-PM1W-001 User manual

Related papers

Other documents