Electrolux S90 Datasheet

Category
Cookers
Type
Datasheet

This manual is also suitable for

Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Pass Through Open Base, Island 2
Sides
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Pass Through Open Base,
Island 2 Sides
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Pass Through Open Base, Island 2 Sides
584246 (GC1G21A2B)S90 4 OPEN GAS BURNERS
(82,000 BTU), PASS
THROUGH OPEN BASE,
ISLAND, 2SIDE OPERA TION
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000 BTU (7 kW)
burner gas range on pass through open base. Unit to be installed in central island type
installations with operating from both sides. High efficiency burners with continuous power
regulations to high power of 82,000 BTU’s (24 kW). Thermocouples as standard on burners
for added safety. Body and open base of unit entirely in 304 Stainless steel. Pan supports
in heavy duty cast iron. Unit shall have heavy duty 304 Stainless steel internal frame with
reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other creating a
seamless work top.
Main Features
Unit for island type installation with operations by chef from
both sides (knobs on both sides of the console).
The two 5 kW and two 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
Open pass through base compartment for storage of pots,
pans, sheet pans etc.
Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
3 mm top in 304 type Stainless steel.
“Lasertec connection system” creates seamless work top
when units are connected to each other.
Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Optional Accessories
Shelf fixation for pass-through base and
hot cupboard
PNC 910772
Shelf for pass-through open bases and hot
cupboards, W=1000mm, thermaline 900
PNC 910782
Side panel, freestanding installations (units
without rear C-board)
PNC 911527
Stainless steel front and back kicking
strips, 1000mm
PNC 911533
Stainless steel kicking strips, both sides,
left and right
PNC 911638
Portioning shelf, 1000mm widthPNC 911856
Portioning shelf, 1000mm widthPNC 911878
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Pass Through Open Base, Island 2 Sides
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Pass Through Open Base, Island 2
Sides
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2009.10.24
Front
Top
EQ=Equipotential screw
G=Gas connection
Side
Gas
Gas Power:
584246(AGGWABGJOO)81816 Btu/hr (24 kW)
Gas Type Option:
Natural Gas;Butane/Propane;
Town Gas on request
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)
Key Information
Storage Cavity Dimensions
(width):770 mm
Storage Cavity Dimensions
(height):358 mm
Storage Cavity Dimensions
(depth):860 mm
Net weight:120 kg
Shipping weight:150 kg
Shipping height:900 mm
Shipping width:1000 mm
Shipping depth:900 mm
Shipping volume:1.21 m³
If appliance is set up or next to or against temperature sensitive
furniture or similar, a safety gap of approximately 150 mm should be
maintained or some form of heat insulation fitted.
  • Page 1 1
  • Page 2 2

Electrolux S90 Datasheet

Category
Cookers
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI