Aleratec 330122 Quick start guide

Category
Media duplicators
Type
Quick start guide

This manual is also suitable for

Quick Start Guide
Welcome!
Congratulations on your purchase of an Aleratec USB
HDD Stand Alone Duplicator, considered by industry
experts to be one of the nest Hard Drive duplicators
and sanitizers available.
The entire Aleratec team is committed to providing
you with courteous service. Our knowledgeable staff
will strive to make owning and operating your new
Aleratec USB HDD Stand Alone Duplicator a pleasant
experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your USB
HDD Stand Alone Duplicator.
For more detailed information on conguring the USB
HDD Stand Alone Duplicator and applying its various
capabilities, please refer to the User Guide which you
can view or download from http://alerat.ec/usb-guides.
We at Aleratec appreciate your selection of our
product, and wish you great success and enjoyment of
your new USB HDD Stand Alone Duplicator.
Key Items on the USB HDD Stand Alone Duplicator
1:7 USB HDD Copy Cruiser SA
Part Number: 330120
1:23 USB HDD Copy Tower SA
Part Number: 330121
1:31 USB HDD Copy Tower SA
Part Number: 330122
Controller:
LCD Display
OK is used to execute a
function, or enter a menu
ESC is used to cancel a
function, or exit a menu
UP arrow is used to scroll
backward through functions
or menus
DOWN arrow is used to
scroll forward through
functions or menus
Controller
Drive LEDs
Display
Panel
Target
Drives
Source
Drive
Included Items
• USBHDDStandAloneDuplicator
• PowerCord
• QuickStartGuide(thisdocument)
• AleratecRegistrationCard
(330122 shown)
Product Features
• Modelstoduplicateupto31USBflashdrivesor
external2.5-inchharddrives/SSDdriveswithUSB

• Modelstosanitizeupto31external2.5-inchhard
diskdriveswith1-Pass/3-Pass/DOD7-PassOverwrite
functions
• Easy-to-readback-lightedLCDdisplayshowsfunction
selectedandjobprogress
• CompatiblewithmostpopularbrandsofUSBflash
drivesandexternal2.5-inchharddrives/SSDdrives
withUSBand2.5”USBharddiskdrives
USB Duplicator
1. Copy
Power Switch
© 2014 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A.
Specifications subject to change without notice. Document Number: 330120-330121_QSG_ENG_Rev_A
Synchronous Copying (for greater than 256MB)
In Synchronous Copying all USB ash drives are copied simultaneously.
1. Load the source ash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Copy is displayed on the
LCD screen.
2. Press the OK button on the display panel. The LCD will display the
following status:
Note: The number beside “USB” is the capacity of the USB flash
drive in megabytes. The number to the right is the size occupied
by files or images.
3. Load the blank target ash drives into the USB Duplicator. The LCD will
display the number of blank media loaded and ready for copying.
4. Finish loading the blank target ash drives, then press the OK button on
the display panel.
5. The LCD will display the status of the copying process.
6. When Copy is complete LCD will display the following status:
If the Copy fails, the LCD will display the number of ash drives that
failed and passed.
Note: When copying is in process the Green LED on the front
panel is blinking. Do not take out the drive while it is copying.
When copying is finished the Green LED stays on (no blinking). If
an error occurs during the copy process a Red LED will display.
Technical Support
Copy 450M
15% (3) 68M
Total MBytes
on source
MBytes copiedPercent complete
E-mail:support@aleratec.comSkype:support.aleratec.com
Phone:+1-818-678-0484FAX:+1-818-678-0483

TechnicalSupportGroupcanbereached8:00AMto5:00
PM,PacificTime,MondaythroughFriday,excludingU.S.
holidays.Pleasetrytocallfromaphonenearyourcomputer
system.Accessisavailable24hoursaday,365daysayear,
via:TheWorldWideWebat:www.aleratec.com
Summary of Operation
Menu:
Function Description
1. Copy Thisoptionperformsacopyfromasourcedrivetoone
ormoretargetdrives.
2. Compare Thisoptionmakesabit-by-bitcomparisonbetween
sourcedriveandallothercopieddrives.
3. Copy+Compare Thisoptionwillmakeacopyfirstandthencomparethe
copieddriveswiththesourcedriverightaftercopyfunction.
4. Overwrite Thisfunctionwillsanitize2.5externalUSBharddisk
drivesusing1-Pass,3-PassorDOD7-PassOverwrite.
5. Information
5.1USBInfo ThisfunctionwillshowtheUSBbasicinformationsuch
asmediatype,contentsizeandavailablespace.
5.2SystemInfo Thisfunctionwillprovideinformationaboutthe
duplicatorincludingfirmwareversion.
6. Utility
6.1DoFormat
6.1.1AutoFormat
Thisfunctionisusedtoformatdriveswiththeduplicator.
Ifthedriveislessthan2GBtheduplicatorwillformat
FAT16.Ifthedriveislargercapacitythan2GBthenthe
duplicatorwillformatFAT32.
6.1.2FAT16Format
ThisfunctionwillformatyourdrivesinFAT16format.
6.1.3FAT32Format
ThisfunctionwillformatyourdrivesinFAT32format.
6.1.4SetFAT16
ClusterSize
ThisfunctionwillsettheclustersizeforFAT16format.
6.1.5SetFAT32
ClusterSize
ThisfunctionwillsettheclustersizeforFA32format.
6.2SystemUpdate
Thisfunctionisusedtoupdateyourduplicators
firmware.
7. Setup
7.1StartupMenu
Youcanselectwhichfunctionisshownfirstwhenyour
duplicatorispoweredon.
7.2CopyArea
WiththisfunctionyouselectQuickCopyorCopywhole
areaofthesource.
7.3ButtonSound
Youcanchoosewhethertohearabeepwhenyoupress
abuttonornot.
7.4TargetTolerance
Thisfunctionisusedtosetthetolerance%ofcapacity
differencebetweensourceandtargets.
7.5Asynchronous
Thisfunctionallowstheusertoenable/disable
asynchronouscopying.
7.6PowerOffTime
BetweenCopy
andCompare
Thisfunctionwillsetthewaittimebeforeautomatically
startingthecompareprocessafterthecopyprocesshas
completed.
7.7Language
Thisfunctionselectsthelanguageshownonthedisplay
(EnglishandJapanese).
7.8SetDefault
Thisfunctionwillresetallsettingstotheiroriginal
values.
Total OK: 5 OK: 5 NG: 0
01:03 OK: 5 NG: 0
USB Duplicator
1. Copy (Data) or (Whole)
USB(963M) 450M
0 to start...
USB(963M) 450M
3 to start...
Port number of slowest target drive
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Aleratec 330122 Quick start guide

Category
Media duplicators
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI