2. Computers & electronics
  3. Data storage
  4. Data storage devices
  5. Media duplicators
  6. Aleratec
  7. 330110

Aleratec 330110 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Aleratec 330110 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
Welcome!
Congratulations on your purchase of
an Aleratec 1:16 USB 3.0 Copy Tower,
considered by industry experts to be one
of the nest USB duplicators available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make
owning and operating your new Aleratec
USB duplicator a pleasant experience.
This Quick Start Guide will lead you step-by-
step through the basic operation procedures
of your USB duplicator.
For more detailed information on conguring
the 1:16 USB 3.0 Copy Tower and applying
its various capabilities, please refer to the
User Guide on the included CD.
We appreciate your selection of our product,
and wish you great success and enjoyment
of your new USB duplicator.
Included Items
• 1:16USB3.0CopyTower
• PowerCord
• USB3.0Cable
• USB3.0HostAdapter
• InstallationandSoftwareCD
• QuickStartGuide(thisdocument)
• AleratecRegistrationCard
Product Features
The1:16USB3.0CopyTowerisaUSB3.0andUSB2.0
flashdriveduplicator.
• ComputerconnectedUSBflashdriveduplicator
• SuperSpeedUSB3.0technology
• Duplicatesupto16USB3.0orUSB2.0flashdrives
simultaneously
• Duplicatedirectlyfromimagefiles,flashdrivesorfrom
selectedfilesandfoldersfromyourharddrive
• Easy-to-UseAleratecSoftwareSuite
• ComeswithUSB3.0PCIehostadapterandUSB3.0cable
Key Items on the 1:16 USB 3.0 Copy Tower
1:16 USB 3.0 Copy Tower™ Part No. 330110
Power Button
USB 3.0/2.0 Slots (16)
USB 3.0/2.0
Connector
Voltage Selector Switch
Warning: This product has a
manually switchable power supply.
Make sure that the power supply
is set to the proper voltage for
your region.
Power Input
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 330110_QSG_ENG_Rev-A
Specifications subject to change without notice.
Summary of Operation
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected]
• ByTelephone:1-818-678-0484 –Skype:support.aleratec.com –orFAX:1-818-678-0483
TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excluding
U.S.holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
• Accessisavailable24hoursaday,365daysayear,via:www.aleratec.com
USB 3.0 Host Adapter Installation
1. Turnoffandunplugthepowercablefromthe
backofyourcomputer.
2. Removethecovertoaccesstheinternal
hardwareofyourcomputer.
3. LocateafreePCIExpressslotandremovethe
metalcoverplateontherearofthecomputer
case.(YournewUSB3.0HostAdapterwillfit
andworkwithanyPCIExpressslotwhetheritis
ax1,x4,x8orx16slot.Performancemayvary
witheachslot.)
4. WheninstallingtheUSB3.0HostAdapter,make
suretofastenthebracketasdocumentedinyour
computermanufacturer’sdocumentation.
5. BesuretoconnecttheSATApowerconnector
fromthepowersupplytothecardasitdoes
requireadditionalpowertofunctionproperly.
6. Placethecoverbackontoyourcomputer.
7. Reattachthepowercabletoyourcomputer
andturnitbackon.
Windows 7, Vista Driver Installation
1. InserttheAleratec1:16USB3.0CopyTower
InstallationandSoftwareCDintoanavailable
CD/DVDdriveofyourcomputer.
2. ClickonInstall USB 3.0 Host Adapter Drivers
toinstallthedriversforyournewUSB3.0Host
Adapter.
3. Followtheon-screenpromptstocompletethe
installation.
Setup
1. ConnecttheUSB3.0cable(included)totheUSBportonthebackofyour
duplicatorandtoanemptyUSB3.0portonyourcomputer.Ifyoudonothave
anavailableUSB3.0portonyourcomputerpleaseseethesectiontitled“USB
3.0HostAdapterInstallation”forinformationregardingtheincludedUSB3.0PCI
Expressdualporthostadapter.
2. CheckthattheredVoltageSelectorSwitchonthebackoftheunitissettothe
propervoltageforyourarea.
3. Connecttheincludedpowercordtothepowerinputontheduplicatorandintoan
availablepoweroutlet.
4. InserttheAleratec1:16USB3.0CopyTowerInstallationandSoftwareCDintoan
availableCD/DVDdriveofyourcomputer.
5. ClickonInstall Aleratec USB Duplication Suitetoinstalltheduplicationsoftware.
6. Followtheon-screenpromptstocompletetheinstallation.
Data Copying
ThissectionwillintroduceyoutoDataCopying.Forcompletedetails,pleasereadthe
Aleratec 1:16 USB 3.0 Copy Tower Software User GuideincludedonyourInstallation
andSoftwareCD.
1. Choose“DataCopyOnly”fromthedropdownmenuofyourAleratecsoftware
interface.
2. Onthesamescreen,click“AddFiles”tocopyindividualfilesor“AddFolder”to
copyanentirefolder.
NOTE:MakesurethatyourselecteddataDOESNOTexceedthecapacityofthe
smallestflashdrivethatyouarecopyingto.Thiswillresultinfailure.
3. Clickonthe“Destination”tabtoselecteachUSBflashdriveyouwanttocopyto.
4. Afterselectingthedestinationdrives,press“Start”tobegintheduplication
process.
Forbestresultswerecommendreadingthesectiontitled“PortTraining”onpage
28oftheAleratec 1:16 USB 3.0 Copy Tower Software User Guideincludedonyour
InstallationandSoftwareCD.
/