VIA Technologies VDLM-100-S/X User manual

Type
User manual
USER MANUAL
VIA VDLM-100-S/X
Deep Learning Machine
For 8 x GPU Cards
1.00-03032020-155700
Copyright
Copyright © 2020 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmied, transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means, electronic, mechanical, magnec, opcal, chemical, manual or otherwise without the prior wrien permission of
VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respecve holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no warranes,
implied or otherwise, in regard to this document and to the products described in this document. The informaon provided in this
document is believed to be accurate and reliable as of the publicaon date of this document. However, VIA Technologies assumes no
responsibility for the use or misuse of the informaon (including use or connecon of extra device/equipment/add-on card) in this
document and for any patent infringements that may arise from the use of this document. The informaon and product specicaons
within this document are subject to change at any me, without noce and without obligaon to nofy any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any me without prior noce.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protecon against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his personal expense.
Noce 1
The changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Noce 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Noce 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conicts or
damages arising from incompability of the product. Check compability issue with your local sales representaves before placing an
order.
Nocaon
In the EU, this symbol means that this product must not be disposed of with household waste.
It is your responsibility to bring it to a designated collecon point for the recycling of waste
electrical and electronic equipment. For more informaon, please contact your local waste
collecon center or your point of purchase.
VIA VDLM-100-S/X User Manual
Table of Contents
1. Product Overview .............................................................................................................. 1
1.1 System Layout ...................................................................................................................................... 1
1.2 ProductSpecicaons ......................................................................................................................... 3
1.3 System Front Panel ............................................................................................................................... 6
1.4 System Back Panel ............................................................................................................................... 7
1.5 FrontControlPanelBuonsandLEDs .................................................................................................. 8
1.5.1 PowerBuon ................................................................................................................................. 8
1.5.2 IDBuon ........................................................................................................................................ 8
1.5.3 NMI(Non-maskableInterrupt)Buon .......................................................................................... 8
1.5.4 SystemResetBuon ...................................................................................................................... 9
1.5.5 StatusLEDDenions .................................................................................................................... 9
1.6 PSULED .............................................................................................................................................. 10
1.7 DriveTrayLEDs ................................................................................................................................... 11
1.7.1 StatusLEDDenions .................................................................................................................. 11
1.8 FanFailedLED ..................................................................................................................................... 12
2. HardwareInstallaonandMaintenance ......................................................................... 13
2.1 Installing the Server Top Covers ......................................................................................................... 13
2.2 HardDrive .......................................................................................................................................... 15
2.2.1 InstallingaHardDiskDriveinto2.5"HardDriveTray .................................................................. 15
2.2.2 Removing2.5"HardDriveTraysfromtheChassis ....................................................................... 15
2.2.3 Installinga2.5"HardDrivetotheHardDriveTray ...................................................................... 15
2.3 Power Supply ................................................... ................................................................................... 17
2.3.1 Installing and Removing the Power Supply .................................................................................. 17
2.3.2 Installing the Power Supply Unit .................................................................................................. 17
2.3.3 Removing the Power Supply Unit ................................................................................................ 18
2.4 Installing and Removing the Server in a Rack ..................................................................................... 19
2.4.1 Installing the Server in a Rack ...................................................................................................... 19
2.4.2 Removing the Chassis Rail from the Slide Rail Assembly ............................................................. 19
2.4.3 AachingtheChassisRailstotheServer ..................................................................................... 20
2.4.4 AachingtheSlideRailAssembliestotheRack .......................................................................... 20
2.4.5 Sliding the Server into the Rack ................................................................................................... 23
2.4.6 Installing and Removing the Server in a Rack .............................................................................. 25
3. Mainboard ....................................................................................................................... 26
3.1 Specicaons ...................................................................................................................................... 26
3.2 I/O Panel ............................................................................................................................................. 27
3.2.1 LANPortLEDIndicaons.............................................................................................................. 27
4. BIOSSeng ..................................................................................................................... 29
4.1 Main Screen ........................................................................................................................................ 29
4.2 Advanced Screen ................................................................................................................................ 29
4.2.1 CPUConguraon ................................................... .................................................................... 30
4.3 ExitScreen .......................................................................................................................................... 31
iv
VIA VDLM-100-S/X User Manual
List of Figures
Figure1: VIAVDLM-100-S/Xlayoutdiagramfrontview ..................................................................................... 1
Figure2: VIAVDLM-100-S/Xlayoutdiagramisometricview .............................................................................. 1
Figure3: VIAVDLM-100S/Xlayoutdiagramtopview ........................................................................................ 2
Figure4: VIAVDLM-100S/Xlayoutdiagramrearview ....................................................................................... 2
Figure5: SystemfrontpaneloftheVIAVDLM-100-S/X ...................................................................................... 6
Figure6: SystembackpaneloftheVIAVDLM-100-S/X ...................................................................................... 7
Figure7: FrontcontrolpanelbuonsandLEDsoftheVIAVDLM-100-S/X ........................................................ 8
Figure8: PSULEDdiagram ............................................................................................................................... 10
Figure9: DrivetrayLEDsdiagram ..................................................................................................................... 11
Figure10: FanFailedLEDdiagram ...................................................................................................................... 12
Figure 11: Installing top rear cover .................................................................................................................... 13
Figure 12: Secure the top middle cover on the chassis ....................................................................................... 13
Figure 13: 4U top front cover .............................................................................................................................. 14
Figure 14: Secure the top front cover with the screws ....................................................................................... 14
Figure15: Removing2.5"harddrivetraysfromthechassis ............................................................................... 15
Figure16: Installinga2.5"harddrivetotheharddrivetray .............................................................................. 15
Figure17: PushinthelockinglevertolocktheHDDtrayintoplace .................................................................. 16
Figure 18: Installing the power supply unit ......................................................................................................... 17
Figure 19: Removing the power supply unit ....................................................................................................... 18
Figure 20: Slide and chassis rails ......................................................................................................................... 19
Figure 21: Removing the chassis rail from the slide rail assembly ...................................................................... 19
Figure22: Aachingthechassisrailstotheserver ............................................................................................. 20
Figure23: Aachingthecagenutsintothemounngholes .............................................................................. 21
Figure 24: Front and rear adjustable brackets on the slide ................................................................................ 21
Figure25: Adjusngthebracketstoaccommodatethedepthoftherack ......................................................... 22
Figure 26: Securing the slide rails to the rack ..................................................................................................... 22
Figure 27: Tighten the lock nuts on the rear bracket .......................................................................................... 23
Figure28: Extendingthesliderails ..................................................................................................................... 23
Figure 29: Sliding the server into the rack .......................................................................................................... 24
Figure 30: Securing the server onto the rack ...................................................................................................... 24
Figure 31: I/O panel diagram ............................................................................................................................. 27
Figure32: LANportLEDindicaons .................................................................................................................... 27
Figure33: LANport(LAN1,LAN2)LEDindicaonsdiagram ............................................................................... 28
Figure 34: Main Screen diagram ........................................................................................................................ 29
Figure 35: Advanced Screen diagram ................................................................................................................. 29
Figure36: CPUConguraonScreendiagram .................................................................................................... 30
Figure37: ExitScreendiagram ............................................................................................................................ 31
v
VIA VDLM-100-S/X User Manual
List of Tables
Table1: Systemfrontpaneldescripon ............................................................................................................ 6
Table2: Systembackpaneldescripon ............................................................................................................. 7
Table3: FrontcontrolpanelbuonsandLEDsdescripon ............................................................................... 8
Table4: StatusLEDdenionstable.................................................................................................................. 9
Table5: PSULEDDescripon .......................................................................................................................... 10
Table6: DrivetrayLEDsdescripon ................................................................................................................ 11
Table7: HDDPowerLEDdescripon .............................................................................................................. 11
Table8: HDDAcvityLEDdescripon ............................................................................................................ 11
Table9: FanLEDdescripon ............................................................................................................................ 12
Table 10: Rail assembly kit ................................................................................................................................ 25
Table11: I/Opaneldescripon ......................................................................................................................... 27
Table12: IPMILANportLEDindicaonstables ................................................................................................. 27
Table13: LANport(LAN1,LAN2)LEDindicaonstables ................................................................................... 28
vi
VIA VDLM-100-S/X User Manual
1
1. Product Overview
TheVIAVDLM-100-S/Xisapowerfulserverwith8-cores/16-coreCPUdesignedfordeeplearningmachine.It
supports 4-tray/8-tray PCIe GPU or double-width GPGPU cards. As a powerful deep learning server, it delivers
excellentperformancewithrobustdesignconformingtoVIAscommitmenttoqualityandendurance.
1.1 System Layout
Figure 1: VIAVDLM-100-S/Xlayoutdiagramfrontview
Figure 2: VIAVDLM-100-S/Xlayoutdiagramisometricview
VIA VDLM-100-S/X User Manual
2
Figure 3: VIAVDLM-100S/Xlayoutdiagramtopview
Figure 4: VIAVDLM-100S/Xlayoutdiagramrearview
VIA VDLM-100-S/X User Manual
3
1.2 ProductSpecicaons
System
Form Factor -3URackmountwith4UTopFrontCover(oponal)
Dimensions -722.3mmx430mmx170.35mm
Front Panel
Buons -Powerbuon
-UIDbuon
-Resetbuon
-NMIbuon
LEDs -2LANLEDs(L1,L2LED)
-2FrontLEDs
-HDDLED
-SystemeventLED
I/O Ports - 2 USB 2.0 ports
- 1 VGA port
MB Tray
Slimline CONN -4(for2LowProlePCIEcard(onex8,anotherx16))
USB 2.0 - 2
USB 3.0 - 2
Serial Port - 1
VGA -1D-Sub
LAN Port - 2 (GLAN by Intel i350) + 1 (IPMI) LAN port (RJ-45)
-LANPortswithLED(ACT/LINKLEDandSPEEDLED)
External Drive Bay
FrontSideDriveBay - 6 2.5"SATAHDD(6Gb/s)Bayor6xSAS*(12Gb/s)
*NeedaddaPCIERAIDcardforSASsupport.
Power Supply
Type - 4 (3+1), Redundant
OutputWas -1200W,Planum
System Fan
Fan - 8 80mmx38mm
FailLED -Abnormal(DCon):LEDON(SolidRed)
-Normal:LEDOFF(FortheFANinthecenter)
System Switch Board
Switch IC -PLX8747
Supports GPU Card - 8 GPGPU card or 8 GPGPU/MIC
GPGPU Card
GPGPUWas -Max.300Wpercard
Supports GPGPU - 8 GPGPU card or 8 GPGPU/MIC
MB Physical Status
Form Factor -SSICEB
Dimensions -12''x10.5''(30.5cmx26.7cm)
VIA VDLM-100-S/X User Manual
4
Processor System
CPU -SupportsIntelXeonScalableProcessors
Socket -DualSocketP
Chipset - C621
System Memory
Capacity -16DIMMslots
Type -6ChannelDDR4memorytechnology2666/2400/2133RDIMM/LR
DIMM
Voltage - 1.2V
Storage
SATA Controller - PCH: 8 SATA3 + 1 M.2
Ethernet
Interface - 1000Mbps/100Mbps/10Mbps
LAN Controller - 2 RJ-45 GLAN by Intel i350
Management
BMC Controller -ASPEEDAST2500
IPMIDedicatedGLAN -1RealtekRTL8211EfordedicatedmanagementGLAN
Features - Watchdog
- NMI
Graphics
Controller -ASPEEDAST2500
VRAM -DDR44GB
Rear Panel I/O
VGA Port -1D-Sub
USB 3.1 Gen1 Port - 2
LAN Port - 1 (IPMI) LAN port (RJ-45)
-LANportswithLED(ACT/LINKLEDandSPEEDLED)
UIDBuon/UIDLED - 1
Internal Connector
M.2 - 1 (up to 2280)
AuxiliaryPanelHeader -1(includeschassisintrusion,locaonbuon&LED,frontLANLED)
TPM Header - 1
Fan Header - 2 CPU Fan, 2 System Fan (6-pin)
ATXPower - 1 (24-pin) + 2 (8-pin)
Front Panel - 1
System BIOS
BIOS Type -256MbAMIUEFILegalBIOS
BIOS Features - Plug and Play (PnP)
-ACPI2.0ComplianceWakeUpEvents
- SMBIOS 2.8 Support
VIA VDLM-100-S/X User Manual
5
Notes:
1.AstheoperangtemperatureprovidedinthespecicaonsisaresultofthetestperformedinVIAschamber,a
numberofvariablescaninuencethisresult.Pleasenotethattheworkingtemperaturemayvarydependingon
theactualsituaonandenvironment.Itishighlyrecommendedtoexecuteasolidtesngprogramandtakeallthe
variablesintoconsideraonwhenbuildingthesystem.Pleaseensurethatthesystemrunswellunderthe
operangtemperatureintermsofapplicaon.
2.Thespecicaonissubjecttochangewithoutnoceinadvance.Thebrandandproductnamesaretrademarks
oftheirrespecvecompanies.Anyconguraonotherthanoriginalproductspecicaonisnotguaranteed.
Hardware Monitor
Temperature - CPU Temperature Sensing
- System Temperature Sensing
- Card Side Temperature Sensing
Fan - CPU/Rear/Front Fan Tachometer
- CPU Quiet Fan (Allow CPU Fan Speed Auto-Adjust by CPU
Temperature)
-CPU/Rear/FrontFanMul-SpeedControl
Voltage -VoltageMonitoring:CPU1/2,VCCM_AB/CD/EF/GH,+1.50_PCH,
3V/5V/ 12V, +1.05V_PCH, +BAT, 3VSB, 5VSB
Environment
Temperature -Operangtemperature:10°C~35°C
-Non-operangtemperature:-40°C~70°C
VIA VDLM-100-S/X User Manual
6
1.3 System Front Panel
Figure 5: SystemfrontpaneloftheVIAVDLM-100-S/X
Table 1: Systemfrontpaneldescripon
4
3
1
2
Item Descripon
1 ControlPanelBuonsandLEDs
2 2xUSB2.0Ports
3 16xPCIECardSlots(single-width)
4 1xVGAPort
VIA VDLM-100-S/X User Manual
7
1.4 System Back Panel
Figure 6: SystembackpaneloftheVIAVDLM-100-S/X
Table 2: Systembackpaneldescripon
SLOT1
SLIMLIN x 8
SLOT2
SLIMLIN x 16
4 3
5 6
321
HDD0
HDD1
HDD2
HDD3
HDD4 NVMe
HDD5 NVMe
Item Descripon
1
6x2.5"HDDtrays
*HDD4andHDD5supportsNVMeHDD
2 I/O Shield
*Dependingonthespecicaonoftheserverboard.
3 PCIExpressCardSlotorMezzanineCardSlot
*YoucaninstalleitheraPCIEcardofamezzaninecardtothisslotwithariser-card
assembly. The riser card (4U10G_SL2P) is pre-installed to the assembly.
*Ifyouwanttoinstallamezzaninecard(onlyM599RandM41202Rsupported),a
mezzanineadaptercard(4U10G_SL2M)isrequired.
*Slot1supportsSlimlinex8;Slot2supportsSlimlinex16.
4 Motherboard Tray Handle
*WARNING!
Pleasedonotopenthetrayiftheserverisnotpowereddownorwhileitissll
running.
5 Rear Vent
6 4xPowerSupplyUnits(RedundantPSU3+1)
*Serverequires3workingPSUs,with1redundantPSU.Youmusthaveatleast
threeacvesupplies,installed,funconingandconnectedtoAC.Onlyoneofthe
PSUs is allowed to be removed while the server is running.
VIA VDLM-100-S/X User Manual
8
1.5 FrontControlPanelBuonsandLEDs
ThischapterprovidesinformaonabouttheVIAVDLM-100-S/XfrontcontrolpanelbuonsandLEDsdiagram
anditsfunconality.
Figure 7: FrontcontrolpanelbuonsandLEDsoftheVIAVDLM-100-S/X
Table 3: FrontcontrolpanelbuonsandLEDsdescripon
Note:
*Pleasebenotedthatthefunconsaresupporteddependingonthetypeofserverboard.
1.5.1 PowerBuon
Pressthepowerbuontotogglethesystempoweronandstandby/sleepmodes.Toremoveallpowerfrom
thesystemcompletely,disconnectthepowercordfromtheserver.Toturn-othepowerfromthesystem
completely, disconnect the power cord from the server.
1.5.2 IDBuon
PresstheIDbuontotogglethefrontpanelIDLEDandthebaseboardIDLEDonando.Youareabletolocate
the serve you're working on from behind a rack of servers.
1.5.3 NMI(Non-maskableInterrupt)Buon
PresstheNMIbuonwithapapercliporpintogenerateanon-masketableinterruptandtoputtheserverina
haltstateforexaminaon.
UID
NMI
RST
L1
L2
L3
L4
PWR
BTN
!
1
2
3
5
7
4
6
Item Descripon
1 PowerBuonandLED
2 UIDBuonandLED*
3 LAN1,LAN2,LAN3,andLAN4AcvityLEDs*
4 HDDAcvityLED
5 SystemEventLED*
6 NMI(Non-maskableInterrupt)Buon*
7 SystemResetBuon
VIA VDLM-100-S/X User Manual
9
1.5.4 SystemResetBuon
Whenthesystemiscompletelyunresponsive,pressthesystemresetbuontoreboottheserverwithout
shungitoandinializethesystem.
1.5.5 StatusLEDDenions
ThetablebelowwillexplainthestatusanddenionsofeachLEDonthesystem.
Table 4: StatusLEDdenionstable
Power LED
Status Descripon
Green Power on
O Powero
ID LED
Status Descripon
Blue Systemidencaonisacve
O Systemidencaonisdisable
LAN1, LAN2, LAN3, LAN4, LEDs
Status Descripon
Green Link between system and network or no access
Blinking Green Network access
HDD Acvity LED
Status Descripon
Blinking Green HDDaccess
O HDDidle
ID LED
Status Descripon
O Runningornormaloperaon
Red Atleastonesensorhascricalalert
VIA VDLM-100-S/X User Manual
10
1.6 PSULED
Figure 8: PSULEDdiagram
Table 5: PSULEDDescripon
PSU LED
Power LED
Status Descripon
Green Normalwork;outputONandOK
Amber Modulefault/proteconinoperaonmode
(failure, OCP, OVP, FAN Fail, OTP, UVP)
AC cord unplugged
Amberblinkingat0.5Hz Warning (high temperature, high power, high current, slow fan)
Greenblinkingat0.5Hz ACPresentOnly12VBSon(PSo)orPSinSmartRedundant
state
VIA VDLM-100-S/X User Manual
11
1.7 DriveTrayLEDs
Figure 9: DrivetrayLEDsdiagram
Table 6: DrivetrayLEDsdescripon
1.7.1 StatusLEDDenions
ThetablesbelowshowsthestatusoftheHDDPowerLEDandHDDAcvityLED.
Table 7: HDDPowerLEDdescripon
Table 8: HDDAcvityLEDdescripon
HDD Power LED
Status Descripon
Blue HDDpowered-on
Amber NopowertoHDD
HDD Acvity LED
Status Descripon
Solid Green HDDacve
Blinking Green HDDaccessingorreading
Red HDDfailed
O HDDpowered-o
1
2
Item Descripon
1 HDDPowerLED
2 HDDAcvityLED
VIA VDLM-100-S/X User Manual
12
1.8 FanFailedLED
Figure 10: FanFailedLEDdiagram
Table 9: FanLEDdescripon
Fan Failed LED
Fan LED
Status Descripon
Solid Red Fan failed
O Normal
VIA VDLM-100-S/X User Manual
13
2. Hardware Installaon and Maintenance
Thisseconwillexplainhowtoinstalltheservertopcovers,harddrive,powersupply,andinstallingand
removing the server in a rack from the system.
2.1 Installing the Server Top Covers
Step 1. Lower the top rear cover on the chassis, making sure the side latches align with the cutouts.
Step 2. Slide the top rear cover towards the rear of the chassis.
Step 3. Secure the top rear cover with the screws.
Figure 11: Installing top rear cover
Step 4. Lower the top middle cover on the chassis and secure it with the screws.
Figure 12: Secure the top middle cover on the chassis
3
Top Rear Cover
2
3
1
4
VIA VDLM-100-S/X User Manual
14
Step 5. When both top middle and rear covers are properly secured, lower the top front cover on the chassis.
CarefullyalignthemounngholesinthetopmiddlecoverandtheChassis.*
Step 6. Slide the top front cover toward the rear of the chassis.
Step 7. Secure the top front cover with the screws.
Figure 13: 4U top front cover
Note:
*Usea4Utop(front)coverinsteadifthepowerconnectorsofyourGPGPUcardareonthetopsideofit.Please
purchase seperately if needed.
Figure 14: Secure the top front cover with the screws
5
6
7
Top Front Cover
7
4U Top Front Cover (Op�onal)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

VIA Technologies VDLM-100-S/X User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI