QMS ImageServer Product information

QMS 2425

ImageServer

Notice

Introduction

This sheet provides information regarding a discrepancy in the soft-

ware initialization of QMS 2425 Print Systems that have ImageServer

installed.

Duplexer Option Shows on Startup Page

when ImageServer is Installed

Due to a discrepancy in the software initialization process, QMS 2425

Print Systems with ImageServer installed show that a duplexer is

installed when you print a start-up page. This may or may not occur

everytime you print a start-up page, and it does not mean that you

have a duplexer installed.

The duplexer is an installed option and will not be resident on your

system unless you’ve installed it. If you can’t determine if you have

the duplexer option, contact your vendor or QMS representative for

further information.

P/N 1760211-001A

QMS and ImageServer are registered trademarks of QMS, Inc. Copyrighted 1998 by

QMS, Inc. All other trademarks are the property of their respective owners. All other

Rights reserved.

This manual is also suitable for