for PCI-P16C16
English/ May 2011/ Version 1.2
What’s in the shipping
package?
One PCI-P16C16 series card
One companion PCI CD (V5.2 or later)
One Quick Start Guide (This document)
One CA-4037W cable and two CA-4002 D-Sub connectors
Software Utility CD
CA-4037W
PCI-P16C16
Series Card
CA-4002
Quick Start Guide
1
PCI-P16C16
Quick Start Guide
Installing Windows Driver
1. Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-bit/64-bit Windows XP/2003/Vista/2008/7; it is
recommended to install this driver for new user:
This example
uses this driver
CD:\NAPDOS\PCI\UniDAQ\DLL\Driver\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PCI-P16R16 series driver supports Windows 98/NT/2K and 32-bit
XP/2003/Vista/7. Recommended to install this driver for have been used PCI-P16R16
series boards of regular user, please refer to:
CD:\NAPDOS\PCI\PCI-P16R16\manual\QuickStart\PCI_PxCx_QuickStart_Eng.pdf
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-p16r16/ manual/ quickstart/
pci_pxcx_quickstart_eng.pdf
2. Click the “Next>” button to start the installation.
3. Click the “N
ext>” button to install the driver into the default folder.
4. Click the “I
nstall” button to continue the installation.
5. Select “NO, I will restart my computer later” and then click the
“F
inish” button.
Jumper Setting
CON2
CON1
JP9~JP16
JP1~JP8
2
PCI-P16C16
Quick Start Guide
JP1~JP8、JP9~JP16: Input Signal Type Jumper
Follow these steps:
1. Shut down and power off your computer.
2. Remove the cover from the computer.
3. Select an unused PCI slot.
4. Carefully insert your I/O card into the PCI slot.
5. Replace the PC cover.
6. Power on the computer.
After powering-on the computer, please finish the Plug&Play
steps according to the prompted messages.
Jumper Channel
Jumper Channel
JP1
DI0
JP9
DI8
JP2
DI1
JP10
DI9
JP3
DI2
JP11
DI10
JP4
DI3
JP12
DI11
JP5
DI4
JP13
DI12
JP6
DI5
JP14
DI13
JP7
DI6
JP15
DI14
JP8
DI7
JP16
DI15
Without Filter
For DC Signal
(Default Setting)
Installing Hardware on PC
Without AC Filter
For AC Signal
3
PCI-P16C16
Quick Start Guide
!
For more detailed jumper
information, please refer to
manual section 1.5.3 Jumper
Settings.
CD:\NAPDOS\PCI\PCI-P16R16\manual\
Pin Assignments
CON1 Connector (Female DB37)
DIB_6
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
2
0
17
16
15
14
13
12
11
10
9
8
18
7
6
5
4
3
2
1
DIB_5
DIA_4
DIA_5
DIA_6
DIB_7
DIB_2
DIB_1
DIB_3
DIB_4
DIA_1
DIA_0
DIA_2
DIA_3
OUT_7
DIB_0
Ext. Power 2
GND2
Ext. Power 2
Ext. Power 1
GND 1
CON1
GND2
OUT_0
OUT
_
2
GND 1
OUT_1
Ext. Power 1
OUT_6
OUT_5
OUT_4
OUT
_
3
19
DIA_7
DIB_15
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
37
35
33
31
29
27
25
23
21
19
39
17
15
13
11
9
7
5
DIB_14
4
5
DIB_1
DIA_1
DIA_1
DIB_1
DIB_12
DIB_13
DIA_11
DIA_10
DIA_12
DIA_13
DIA_8
DIA_9
DIB_9
DIB_8
GND 4
GND
DO_12
DO_11
DO_15
DO_14
DO_13
CON2 Connector (40-pin box header)
1
0
4
wer 4Ext.Po
Ext.Power 4
GND 3
Ext.Power 3
CON2
DO_10 GND 3
2
3
1
DO_8
DO_9
Ext.Power 3
DIB_14
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
17
16
15
14
13
12
11
10
9
8
18
7
6
5
4
3
2
1
DIB_13
DIA_12
DIA_13
DIA_14
DIB_15
DIB_10
DIB_9
DIB_11
DIB_12
DIA_9
DI
OU
A_8
DIA_10
DIA_11
T_1
5
DIB_8
Ext.Power 4
GND 4
Ext.Power 4
Ext.Power 3
GND 3
CON2
GND 4
OUT_8
OUT_10
GND 3
OUT_9
Ext.Power 3
T_14
OUT_13
OUT_12
OUT_11
OU
External
19
DIA_1
5
Cable
(CA-4037W)
4
PCI-P16C16
Quick Start Guide
Self Test
1. Prepare for device:
z DN-37 (Optional) wiring terminal board.
z External power supply device. For example: DP-665(Optional)
2. Use the DN-37 to connect the board CON1.
3. Connect the External Power +24V
to CON1.Ext.Power1 and
CON1.DIB 0
. (+24V ÅÆ pin20, pin30)
4. Connect the External Power GND
to CON1.GND 1,
CON1.GND 2. (GND ÅÆ pin22, pin26)
5. Connect the CON1.OUT 0
with CON1.DIA 0.
(pin1 ÅÆ pin12)
5
PCI-P16C16
Quick Start Guide
6. Execute the Digital IO sample program.
The sample program is contained in:
CD:\NAPDOS\PCI\UniDAQ\DLL\Demo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/demo/
7. The following sample program is written in Delphi6.
File: DLL_delphi6_xxxxxx.exe
Path: ....\ DLL_Delphi6\Digital_IO\
Double click the “Digital_IO.exe”
8. Verify total numbers of the PCI-P16C16 card and
Perform DIO functions test.
1
2
3
Select the board
number for the PCI-P16C16 to activate.
(It ran
g
es form 0 to total board number subtractin
g
one)
Select the Port 0 in the Output port drop down list.
Click this button to start test.
4
Select the Port 0 in the Input port drop down list.
3
1
2
4
6
PCI-P16C16
Quick Start Guide
9. Get DIO function test result.
5
6
Click channel 0 in Digital Output field.
The Digital Input status should show current status--
channel 0 now in hi
g
h state
(
Red li
g
ht
)
.
Additional Information
PCI-P16C16 Series Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/pci_p16c16.htm
DP-665, CA-3710 and DN-37 page (Optional):
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
Documentation:
CD:\NAPDOS\PCI\PCI-P16R16\Manual
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-p16r16/manual/
CD:\NAPDOS\PCI\UniDAQ\Manual
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/maunal/
Software:
CD:\NAPDOS\PCI\UniDAQ\DLL
http://www.icpdas.com/download/pci/pci-p16r16.htm
6
ICP DAS Web Site: http://www.icpdas.com
Contact Us (E-Mail): service@icpdas.com , [email protected]
Copyright @ 2011 by ICP DAS Co., Ltd. All Rights Reserved.
7
5
/