Silvercrest sbth4.0-a1 User Manual And Service Information

Category
Headphones
Type
User Manual And Service Information
SilverCrest SBTH 4.0 A1
Français - 19
Service technique
Téléphone : 01 – 712 302 83
Téléphone : 02 – 700 16 43
Téléphone : 800 – 24 14 3
Téléphone : 044 – 511 82 91
IAN: 106951
Fabricant
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
SilverCrest SBTH 4.0 A1
Deutsch - 37
Service
Telefon: 0049 (0) 211 - 547 69 93
Telefon: 0043 (0) 1 - 79 57 60 09
Telefon: 0041 (0) 44 - 511 82 91
IAN: 106951
Hersteller
TARGA GmbH
Coesterweg 45
59494 SOEST
DEUTSCHLAND / GERMANY
SilverCrest SBTH 4.0 A1
38 - English
Table of contents
Trademarks ............................................................................ 39
Introduction ............................................................................ 39
Intended use ........................................................................... 39
Supplied items ........................................................................ 40
Technical data......................................................................... 41
Safety instructions .................................................................. 42
Copyright ............................................................................... 46
Overview of the controls and button functions ....................... 47
Prior to use ............................................................................. 48
Charging the battery ........................................................................................ 48
First use .................................................................................. 48
Switching the headphones on/off ................................................................... 48
Connecting headphones .................................................................................. 48
Connecting headphones to two Bluetooth
®
devices ...................................... 49
Putting on the head phones ............................................................................... 50
Music playback................................................................................................. 50
Making calls ...................................................................................................... 51
Deleting list of connections ............................................................................... 52
Troubleshooting ..................................................................... 52
Environmental and disposal information ................................ 53
Conformity information .......................................................... 53
Warranty and servicing advice ............................................... 54
SilverCrest SBTH 4.0 A1
English - 39
Trademarks
The Bluetooth
®
word mark and logos are registered trademarks of Bluetooth
SIG, Inc. (Special Interest Group).
USB is a registered trademark.
Other names and products may be the trademarks or registered trademarks of
their respective owners.
Introduction
Thank you for purchasing a SilverCrest product.
The SilverCrest SBTH 4.0 A1 Bluetooth
®
headphones, hereinafter referred to as
headphones, allow you to listen to music from your smartphone or music
playback device wirelessly. Their lightweight construction ensures they are
comfortable to wear while providing a crystal-clear sound with disruptive
background noise largely eliminated.
Intended use
These headphones are a consumer electronics device which is used to listen to
music at a reasonable volume. The headphones can also be used as a hands-
free kit. The headphones may only be used privately and not for industrial or
commercial purposes. Furthermore, the headphones may not be used in
tropical climates. The manufacturer does not accept any liability for any
resulting damage or faults in the event of unauthorised modifications to the
headphones. Only use accessories specified by the manufacturer. Please
observe the regulations and laws in the country of use.
SilverCrest SBTH 4.0 A1
40 - English
Supplied items
A SilverCrest SBTH 4.0 A1 Bluetooth
®
headphones
B USB charging cable
C These instructions (symbolic representation)
SilverCrest SBTH 4.0 A1
English - 41
Technical data
Operating voltage 5V
Battery Li-Ion, 3.7V
Battery capacity 195mAh
Bluetooth
®
specification v4.0 + EDR
Profile support A2DP, AVRCP, HSP, HFP
Frequency range of headphones 20Hz – 20kHz
Frequency range of microphone 20Hz – 16kHz
Range of Bluetooth
®
operation up to 10 metres
Charging time approx. 2.5 hours
Standby time up to 1900 hours
Music playback approx. 15 hours*
Talk time approx. 15 hours*
Dimensions (W x H x D) approx. 165 x 153 x 52mm
Weight approx. 135g
Operating temperature 0°C to +45°C
Storage temperature -20°C to +60°C
Air humidity max. 85% rel. humidity
(non-condensing)
* At medium volume
The technical data and design may be changed without notification.
SilverCrest SBTH 4.0 A1
42 - English
Safety instructions
Before using these headphones for the first time, please read the following
instructions carefully and take note of the safety warnings, even if you are
familiar with the use of electronic devices. Store these instructions in a safe
place for future reference. If you sell or pass on the headphones to someone
else, be sure to always include these operating instructions as they are an
integral part of the device.
Explanation of the hazard symbols used in these
instructions
DANGER! This symbol in conjunction with the "danger" note
indicates an imminent dangerous situation which, if not
prevented, could result in serious injury or even death.
WARNING! This symbol in conjunction with the "warning"
note indicates important information for safe operation of the
device and the safety of the user.
Take care when using headphones. Listening at high volume for
prolonged periods of time can damage your hearing. Before
using the headphones, set the volume to the lowest level.
This symbol indicates other important information on the topic.
SilverCrest SBTH 4.0 A1
English - 43
DANGER! Radio interface
Switch off the headphones in aircraft, hospitals, operating rooms or in the
vicinity of medical electronic systems. The transmitted radio waves can impair
the functionality of sensitive devices. Keep the headphones at least 20cm away
from any pacemakers or implantable cardioverter defibrillators because the
proper functioning of the pacemaker or implantable cardioverter defibrillator
can be impaired by radio waves. The transmitted radio waves can cause
interference in hearing aids. Do not place the device in the vicinity of
flammable gases or in a potentially explosive environment (e.g. paint shop)
when the radio components are switched on because the transmitted radio
waves can cause an explosion or a fire. The range of the radio waves is
dependent on conditions in the surrounding environment. In the event of data
traffic via a wireless connection, it is also possible for unauthorised third parties
to receive data. Targa GmbH is not responsible for radio or television
interference caused by unauthorised changes to this device. In addition, Targa
assumes no responsibility for the replacement or exchange of connecting lines
and devices not indicated by Targa GmbH. The user is solely responsible for
the elimination of interference caused by such unauthorised changes and for
the replacement or exchange of the devices.
DANGER! Risk of explosion!
The headphones must not be thrown into a fire because the built-in battery may
explode.
SilverCrest SBTH 4.0 A1
44 - English
DANGER! Children and persons with
disabilities
These headphones can be used by children aged 8 and older and by persons
with reduced physical, sensory or mental abilities or lack of experience and
knowledge if they are supervised or have been instructed on the safe use of the
headphones and understand the resulting risks. Children must not play with the
headphones. Cleaning and user maintenance must not be carried out by
children without supervision. Small parts can be fatal if swallowed.
Always keep plastic packaging away from children.
DANGER! It poses a suffocation risk!
WARNING! Ensure that
no direct heat sources (e.g. heating) can affect the headphones
the headphones are not exposed to bright artificial light
any contact with splashed and dripping water and corrosive liquids is
avoided and the headphones are not operated in the vicinity of water. In
particular, the headphones should never be submerged in liquid; do not
place any vessels filled with liquid, for example, vases or drinks, on or near
the headphones
the headphones are not used in the immediate vicinity of magnetic fields
(e.g. speakers)
no fire sources (e.g. burning candles) are placed on or near the headphones
no foreign objects penetrate the device
the headphones are never subjected to extreme temperature fluctuations as
this could result in condensation and electrical short circuits. If the
headphones were subjected to extreme temperature fluctuations, however,
SilverCrest SBTH 4.0 A1
English - 45
wait (approx. 2 hours) until the headphones have reached ambient
temperature before use
the headphones are never subjected to excessive shocks and vibrations
the headphones are never covered while they are charging as they can
become heated
when using an optional USB power supply, its operating instructions are
observed
connected cables are always laid in such a manner that nobody can step on
them or trip over them. There is a risk of injury
no objects are placed on a connected cable and cables are not connected
over sharp edges because they could be damaged otherwise.
WARNING! Maintenance / cleaning
It is necessary to repair the headphones if they have been damaged in any
way, for example, if the housing is damaged, if liquid or objects have
penetrated the device or if the product has been exposed to rain or moisture.
Repair work is also required if the device is not working properly or has been
dropped. If smoke is produced, or there are any unusual sounds or smells, turn
the headphones off immediately. In such cases, the headphones should not be
used until they have been inspected by authorised service personnel. Only
have the device repaired by qualified personnel. Never open the housing of
the headphones.
Only use a clean, dry cloth for cleaning the headphones and never use any
corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to
remove stubborn dirt.
Never try to open the housing of the headphones. This would void your
warranty.
SilverCrest SBTH 4.0 A1
46 - English
Operating environment
The headphones are not designed for use in environments with a high
temperature or humidity (e.g. bathrooms), and must be kept free from dust.
Operating temperatures and operating air humidity: 0°C to 45°C, max. 85%
rel. humidity.
Copyright
All information contained in these instructions is subject to copyright and is
provided for information purposes only. It is only permitted to copy or duplicate
data and information with the express and written consent of the author. This
also includes commercial use of the content and data. The text and illustrations
are based on the state of the art at the time of printing.
SilverCrest SBTH 4.0 A1
English - 47
Overview of the controls and button functions
An illustration of the controls with the relevant reference numbers can be found
on the fold-out inside cover of these instructions. You can leave this cover page
folded out while reading further sections of these instructions. Thus you always
keep a reference to the relevant control in sight.
1 Headband
2 + button
3 ▸ll button
4
> button
5 Microphone
6 Earphone
7 Charging socket
8 < button
9 LED
10 - button
SilverCrest SBTH 4.0 A1
48 - English
Prior to use
Take the headphones and the accessories out of the packaging and remove all
packaging material completely.
Charging the battery
Before the first use or when the built-in battery is empty, you charge it as
follows:
Connect the supplied USB charging cable (B) to the charging socket (7) and
a free USB socket of your computer when it is switched on or a USB power
supply (not supplied).
The LED (9) lights up orange while the battery is being charged. When the
battery is fully charged, the LED (9) lights up blue.
The LED (9) flashes orange when the battery is low.
First use
Switching the headphones on/off
Switch on the headphones by pressing the ▸ll button (3) for approximately 3
seconds. The LED (9) flashes orange and thus indicates standby mode. If the
headphones were switched on for the first time and had never been connected
to a device, pairing mode is started automatically. The LED (9) alternates
between flashing blue and orange in pairing mode. Read the next section
when connecting your device.
Press the ▸ll button (3) for approximately 3 seconds to switch off the
headphones.
Connecting headphones
Proceed as follows to connect the headphones to your device:
Switch off the headphones.
Press the ▸ll button (3) for approximately 6 seconds to start pairing mode.
SilverCrest SBTH 4.0 A1
English - 49
The LED (9) alternates between flashing blue and orange. The headphones
are now in search mode. In search mode, you can connect a compatible
device to the headphones via the Bluetooth
®
function.
Then connect your smartphone or audio / media player to the headphones
via Bluetooth
®
. For further details, please read the instructions of your
smartphone or media player. Select the device "SBTH 4.0 A1" from the list of
devices which are found and establish the connection. If you are asked for a
PIN, enter "0000".
When there is an established connection, the LED (9) flashes blue twice briefly
about every 3 seconds. As soon as the device is switched off or is out of range,
the headphones switch to standby mode (not connected) and the LED (9)
flashes orange once briefly every 2 seconds.
If you want to connect a different device to the headphones, you must repeat
the pairing as described previously.
As soon as the previously connected device comes within range of the
headphones, the connection is established automatically. You may need to
confirm the connection on your device.
Connecting headphones to two Bluetooth
®
devices
You can connect the headphones to two Bluetooth
®
devices at the same time. If
you have already connected a device to the headphones, proceed as follows
to connect another device:
Activate the multiple connection mode by pressing the ▸ll button (3) briefly in
pairing mode until four signal tones can be heard in an ascending tone
sequence.
Establish the connection to your second device. Note the previous section
"Connecting headphones" for further details.
Deactivate the multiple connection mode by pressing the ▸ll button (3) twice
in pairing mode until four signal tones can be heard in a descending tone
sequence.
SilverCrest SBTH 4.0 A1
50 - English
Putting on the headphones
Note the markings on the inside of the headband (1) directly above the
earphone (6) to put on the headphones correctly: R = right, L = left. The
controls and the LED (9) are located on the right side of the headphones.
You can adjust the size of the headband (1) by extending the earphone (6)
slightly out of the headband (1) and sliding it back into the headband (1). This
ensures that they fit as comfortably as possible.
Music playback
All of the following functions depend on the functionality of the
mobile phone or media player which is used. It is possible that
some functions may not be supported.
If you have connected the headphones to a smartphone or a music playback
device, you can listen to music via the headphones. The following functions are
available:
Function Action
Playback Press the ▸ll button (3) briefly
Pause Press the ▸ll button (3) briefly
Next track Press the > button (4) briefly
Previous track Press the < button (8) briefly
Scan forward Keep the > button (4) pressed
Scan back Keep the < button (8) pressed
Increasing volume Press the + button (2)
Reducing volume Press the - button (10)
SilverCrest SBTH 4.0 A1
English - 51
Making calls
If you have connected the headphones to a mobile phone, you can make calls
via the headphones. You can perform the following functions:
Function Action
Answering call Press the ▸ll button (3) briefly
Ending call Press the ▸ll button (3) briefly
Rejecting call Press the ▸ll button (3) for
approximately 2 seconds until a beep
sounds
Redialling Press the ▸ll button (3) twice briefly
Voice control Press the + button (2) and - button (10)
at the same time briefly
Increasing volume Press the + button (2)
Reducing volume Press the - button (10)
Transferring phone call from
headphones to mobile phone
Press the ▸ll button (3) twice briefly
Taking phone call from mobile
phone to headphones
Press the ▸ll button (3) twice briefly
Answering a new call and
ending the current call *
Press the ▸ll button (3) briefly
Switching between two calls
(toggling) *
Press the ▸ll button (3) for
approximately 2 seconds until a beep
sounds
* This function must be supported by your network operator.
SilverCrest SBTH 4.0 A1
52 - English
Deleting list of connections
The headphones note in a list of connections the last devices that were
connected. You can delete this list of connections as follows:
Start pairing mode as described in the section "Connecting headphones".
Press the ▸ll button (3) and the - button (10) at the same time for at least 5
seconds until the LED (9) briefly stops flashing.
The list of connections is then deleted. If the headphones are switched on
again, pairing mode is started automatically.
Troubleshooting
The headphones cannot be switched on.
Charge the battery.
No audio signal for Bluetooth
®
connection
Switch on the headphones.
Try to connect the headphones to the device again.
The Bluetooth
®
connection is not established.
Check whether the Bluetooth
®
function of your device is switched on.
The distance between the headphones and the device is too large, reduce
it.
Not all aforementioned functions are working
All aforementioned functions depend on the functionality of the device
which is used.
SilverCrest SBTH 4.0 A1
English - 53
Environmental and disposal information
When this symbol appears on a product, this indicates that
the product is subject to the European Directive
2012/19/EU. All old electrical and electronic devices must
be separated from normal household waste and disposed of
at designated state facilities. The correct disposal of old
devices in this manner will prevent environmental pollution
and human health hazards. For further information about
proper disposal, contact your local authorities, waste
disposal office or the shop where you bought the device.
The built-in battery cannot be removed for disposal.
Dispose of the packaging in an environmentally compatible manner.
Cardboard can be put out for municipal paper collections or brought to public
collection points for recycling. Films and plastic used for packaging the device
are collected by your local disposal services and disposed of in an
environmentally compatible manner.
Conformity information
This device meets the basic requirements and other relevant
regulations of the EMC Directive 2004/108/EC, the Low
Voltage Directive 2006/95/EC, the R&TTE Directive
1999/5/EC and the RoHS Directive 2011/65/EU. The
Declaration of Conformity can be found at the end of these
instructions.
SilverCrest SBTH 4.0 A1
54 - English
Warranty and servicing advice
Warranty of TARGA GmbH
This device is sold with three years warranty from the date of purchase. Please
keep the original receipt in a safe place as proof of purchase. Before using
your product for the first time, please read the enclosed documentation. Should
any problems arise which cannot be solved in this way, please call our hotline.
Please have the article number and, if available, the serial number to hand for
all enquiries. If it is not possible to solve the problem on the phone, our hotline
support staff will initiate further servicing procedures depending on the fault.
Within the warranty period the product will be repaired or replaced free of
charge as we deem appropriate. No new warranty period commences if the
product is repaired or replaced. Consumables such as batteries, rechargeable
batteries and lamps are not covered by the warranty.
Your statutory rights towards the seller are not affected or restricted by this
warranty.
SilverCrest SBTH 4.0 A1
English - 55
Service
Phone: 0207 – 36 50 744
Phone: 01 – 242 15 83
Phone: 800 – 62 175
Phone: 800 – 92 496
IAN: 106951
Manufacturer
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Silvercrest sbth4.0-a1 User Manual And Service Information

Category
Headphones
Type
User Manual And Service Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages