Optimus WCM-32WT User manual

Type
User manual

This manual is also suitable for

Optimus WCM-32WT is a loudspeaker with a rated power of 60 W that can be used in both indoor and outdoor applications thanks to its IP56 protection rating. It features a 5.25" woofer and a 1.42" tweeter, and it can be used with either a 70V or 100V line. The speaker has a sensitivity of 90 dB at 1 W / 1 m / 1 kHz, and a maximum SPL of 105 dB at 32 W / 1 m / 1 kHz. The frequency range is 60 ~ 20,000 Hz. The speaker comes with a U-type bracket for easy installation.

Optimus WCM-32WT is a loudspeaker with a rated power of 60 W that can be used in both indoor and outdoor applications thanks to its IP56 protection rating. It features a 5.25" woofer and a 1.42" tweeter, and it can be used with either a 70V or 100V line. The speaker has a sensitivity of 90 dB at 1 W / 1 m / 1 kHz, and a maximum SPL of 105 dB at 32 W / 1 m / 1 kHz. The frequency range is 60 ~ 20,000 Hz. The speaker comes with a U-type bracket for easy installation.

INSTRUCTION MANUAL
WCM-32WT / WCM-32BT Version 1.0 1/1
WCM-32WT / WCM-32BT
At WARNING:
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
CABINET SPEAKER
SPECIFICATIONS
Paso 1 Fasten A bracket to the wall using 4 screws.
Paso 2 Attach C to A, lock B to A and fasten screws.
Paso 3 Select the desired power tab, connect input line cables and cover the
waterproof rubber.
Paso 4 Screw the two knobs.
Paso 5 Aim the speaker and fasten the screws to block it.
Model
WCM-32WT / WCM-32BT
Loudspeaker
5.25” woofer + 1.42” tweeter
Rated Power (RMS)
60 W
Power Taps 100 V
32 W, 16 W, 8 W, 4 W & 2 W
Power Taps 70 V
32 W, 16 W, 8 W, 4 W, 2 W & 1 W
Impedance
312 Ω, 625 Ω, 1250 Ω, 2k5 Ω, 5k Ω & 8 Ω
Sensitivity
90 dB at 1 W / 1 m / 1 kHz
SPL
105 dB at 32 W / 1 m / 1 kHz
Freq. Range
60 ~ 20.000 Hz
IP protection range
IP56
Dimension (mm)
190 (width) x 256 (height) x 225 (depth)
Weight
2.6 kg
Finish
ABS (White / Black)
Aluminum grille and bracket
Accessories
U type bracket
Power selection
Rotary Switch
100 V
Impedance
Ø
153 Ω
32 W
312 Ω
16 W
625 Ω
8 W
1250 Ω
4 W
2k5 Ω
2 W
5 kΩ
-
8 Ω
INSTALLATION GUIDE
  • Page 1 1
  • Page 2 2

Optimus WCM-32WT User manual

Type
User manual
This manual is also suitable for

Optimus WCM-32WT is a loudspeaker with a rated power of 60 W that can be used in both indoor and outdoor applications thanks to its IP56 protection rating. It features a 5.25" woofer and a 1.42" tweeter, and it can be used with either a 70V or 100V line. The speaker has a sensitivity of 90 dB at 1 W / 1 m / 1 kHz, and a maximum SPL of 105 dB at 32 W / 1 m / 1 kHz. The frequency range is 60 ~ 20,000 Hz. The speaker comes with a U-type bracket for easy installation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages