Page is loading ...
INSTRUCTION MANUAL
WCM-32WT / WCM-32BT Version 1.0 1/1
WCM-32WT / WCM-32BT
At WARNING:
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
CABINET SPEAKER
SPECIFICATIONS
Paso 1 – Fasten A bracket to the wall using 4 screws.
Paso 2 – Attach C to A, lock B to A and fasten screws.
Paso 3 – Select the desired power tab, connect input line cables and cover the
waterproof rubber.
Paso 4 – Screw the two knobs.
Paso 5 – Aim the speaker and fasten the screws to block it.
Model
WCM-32WT / WCM-32BT
Loudspeaker
5.25” woofer + 1.42” tweeter
Rated Power (RMS)
60 W
Power Taps 100 V
32 W, 16 W, 8 W, 4 W & 2 W
Power Taps 70 V
32 W, 16 W, 8 W, 4 W, 2 W & 1 W
Impedance
312 Ω, 625 Ω, 1250 Ω, 2k5 Ω, 5k Ω & 8 Ω
Sensitivity
90 dB at 1 W / 1 m / 1 kHz
SPL
105 dB at 32 W / 1 m / 1 kHz
Freq. Range
60 ~ 20.000 Hz
IP protection range
IP56
Dimension (mm)
190 (width) x 256 (height) x 225 (depth)
Weight
2.6 kg
Finish
ABS (White / Black)
Aluminum grille and bracket
Accessories
U type bracket
Power selection
Rotary Switch
70 V
100 V
Impedance
32 W
Ø
153 Ω
16 W
32 W
312 Ω
8 W
16 W
625 Ω
4 W
8 W
1250 Ω
2 W
4 W
2k5 Ω
1 W
2 W
5 kΩ
-
-
8 Ω
INSTALLATION GUIDE
/
