Job ________________________________________________
“POKER CHIP” DISH DOLLY
L02-104
4/01
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
®
16.26
“Poker Chip” Dish Dolly
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Manufactured by:
Specifications
Material: High-strength aluminum sheet.
Construction: Riveted and bolted construction.
Chassis: Brake-formed into box shape and
nylon coated.
Vertical Sections: Brake-formed into dish-holding
columns; riveted to chassis for support. All vertical
sections are nylon coated.
Casters: Two 5" (127mm) B5DN swivel casters; two
5" (127mm) B5DNB swivel casters with brakes. Ball
bearing swivel; ball bearing axle. Nickel-plated,
neoprene-tired, pre-lubricated. Casters are bolted
through chassis.
Dimensions
———— Storage Capability ————
Approx. Dish Maximum Packaged
Height Width Depth Capacity per Dish Size Weight
Model No. (in.) (mm) (in.) (mm) (in.) (mm) Column (in.) (mm) (lbs.) (kg)
T18C04P 32
3
/
8
820 26
1
/
8
665 26
1
/
8
665 60 11–12
1
/
4
11–311 62 28
NOTE 1: Column height = 20" (508mm).
NOTE 2: Base of dolly is 12" (305mm) from floor surface.
NOTE 3: Capacity depends upon thickness and nesting characteristics of dishes.
Accessories
Model No.
A45 Cover
A36 Continuous Bumper
"Poker Chip" Dish Dolly