Focal Point 10004294 User manual

Focal Point
Brand
Focal Point
Model
10004294
Type
User manual

This manual is also suitable for

12 Arentzen Blvd.
Charleroi, PA 15022
800-662-5550
www.focalpointproducts.com
PAINTING INSTRUCTIONS
Caution
Focal Point polyurethane products ship from the factory with a UV blocking primer
paint. If during the course of installation, the original primed surface is damaged or
additional exposed areas are created, spackle, sand and touched up the area and
re-prime the affected areas with a suitable UV blocker primer.
Step One
Fill screw or nail holes using a vinyl spackle or plastic fi ller.
Step Two
Clean the item to make sure it is free of dirt, grease, peeling paint and debris using
a water based cleaner, ammonia or isopropyl alcohol. (Cleaning agents
containing hydrocarbons such as mineral spirits will leave behind a residue that
water based paint will not be able to dissolve or adhere to.)
Step Three
Paint with a high quality latex or oil-based paint for a smooth solid fi nish. If you are
preparing a faux fi nish, including wood grain, use a non-penetrating glazing stain or
paint. DO NOT use lacquer based paint products on Focal Point products.
Note: All polyurethane products are subject to thermal expansion and contraction
and therefore should not be painted in darker colors that absorb more radiation than
lighter colors. Flat, eggshell and satin fi nishes are recommended because they are
more porous during the curing process. Apply paint according to the manufacturer’s
instructions.
NOTE: A finish coat of
paint must be applied
to all products or the
limited life-time
warranty is void.
  • Page 1 1

Focal Point 10004294 User manual

Focal Point
Brand
Focal Point
Model
10004294
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents