LG ACC-S1-EH5C User manual

LG
Brand
LG
Model
ACC-S1-EH5C
Type
User manual

LG ACC-S1-EH5C

The LG ACC-S1-EH5C is a cylinder stand kit designed for use with Signage boxes. It allows you to mount your Signage box on a stand, providing a stable and secure platform for displaying your content. The stand is height-adjustable, allowing you to position your Signage box at the optimal viewing height. It also features a cable management system to keep your cables organized and out of the way.

With its sleek design and durable construction, the LG ACC-S1-EH5C is the perfect solution for displaying your Signage box in any environment. Whether you're using it for commercial or personal use, the LG ACC-S1-EH5C is sure to meet your needs.

LG ACC-S1-EH5C

The LG ACC-S1-EH5C is a cylinder stand kit designed for use with Signage boxes. It allows you to mount your Signage box on a stand, providing a stable and secure platform for displaying your content. The stand is height-adjustable, allowing you to position your Signage box at the optimal viewing height. It also features a cable management system to keep your cables organized and out of the way.

With its sleek design and durable construction, the LG ACC-S1-EH5C is the perfect solution for displaying your Signage box in any environment. Whether you're using it for commercial or personal use, the LG ACC-S1-EH5C is sure to meet your needs.

ACC-S1-EH5C
www.lge.co.kr
P/No.: MFL69532005 (1605-REV00)
Printed in Korea
*MFL69532005*
사용설명서를 읽고 난 후 사용하는 사람이 언제라도 볼 수 있는 장소에
보관하세요.
사용설명서
실린더 스탠드 키트
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
ACC-S1-EH5C
Please read this manual carefully before operating your set and retain it
for future reference.
OWNER’S MANUAL
Cylinder Stand kit
www.lg.com
Page is loading ...
3
ENG
ENGLISH
1 Open the product box and remove the packaging materials and the T-con box in the order they appear.
1
2
T-con box
2 Attach the mounting brackets to the Signage box using four screws (M4 x L8).
4
ENG
ENGLISH
3 Loosen the six screws and remove the frame from the set.
4 Affix the pipe to the Cylinder Stand Top and the Top body to the pipe. Hold the pipe and pull up to open the Cylinder
Stand Top.
2
1
5
ENG
ENGLISH
5 Attach the pipe to the frame by fastening a screw (M3 x L5.5) in the screw hole on the top of the pipe.
6 Remove the protective film on each of the three columns protruding from the bottom of the Cylinder Stand Top.
6
ENG
ENGLISH
7 Line up the Cylinder Stand Top, Signage box, and Stand Bottom on the floor. Insert the 16/22 pin cable and HDMI
cable into the hole in the top body and pass the cables downward through the hole.
FRONT
8 Connect the cables passed through the pipe to the Signage box. The Front cable must be connected to the upper
part and the Rear cable must be connected to the lower part. The 16/22 pin cable with the red mark must be
connected to the upper part.
16
16
22
22
FRONT
R
R
7
ENG
ENGLISH
9 Attach the 16/22 pin cables using the 2 screws (M3 x L4.5).
22
16
22
16
10
Position the jack cover to fit the cables to the cut spaces and then attach it using the 2 screws (M3 x L4.5).
1
2
8
ENG
ENGLISH
11
Place the Signage box inside the stand base.
12
Pass the power cable through the hole in the bottom near the stand connector and into the inside of the stand, and
then attach the cable to the Signage box.
Fan direction
Connector
direction
9
ENG
ENGLISH
13
Install the Signage box with the attached cables onto the stand base and attach it using four screws (M3 x L4.5).
Connector
direction
Fan direction
10
ENG
ENGLISH
14
Install the Cylinder Stand Top onto the top of the Bottom Stand. The three columns protruding from the bottom of
the Stand Top should be inserted into the holes near the edges of the Stand.
11
ENG
ENGLISH
15
Identify the Front and Rear HDMI cables and 16/22 pin cables, then pick up the set and attach it to the frame.
22
FRONT
16
RR
16
Connect the HDMI cable with the label marked ‘FRONT’ to the front side. Insert the 16/22 pin cable without the
red mark into the cable holder and attach it using a screw (M3 x L4.5).
22
FRONT
16
RR
22
FRONT
16
RR
12
ENG
ENGLISH
17
Connect the HDMI cable without the label marked ‘FRONT’ to the rear side. Insert the 16/22 pin cable with the red
mark into the cable holder and attach it using a screw (M3 x L4.5).
16
22
18
Remove the two screws, change the direction of the LG logo, and then reassemble.
13
ENG
ENGLISH
19
Cover the front side with the side of the T-con box cover that has the IR receiver and attach it using four screws
( 3 x L6) on the opposite side.
16
22
16
22
20
Cover the rear side with the other T-con box cover and attach it using 2 screws ( 3 x L10).
14
ENG
ENGLISH
21
Fasten 6 screws (M4 x L8) to the bottom part of the T-con cover.
15
ENG
ENGLISH
Plug the power cable that is located at the bottom of the stand into a power outlet.
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

LG ACC-S1-EH5C User manual

LG
Brand
LG
Model
ACC-S1-EH5C
Type
User manual

LG ACC-S1-EH5C

The LG ACC-S1-EH5C is a cylinder stand kit designed for use with Signage boxes. It allows you to mount your Signage box on a stand, providing a stable and secure platform for displaying your content. The stand is height-adjustable, allowing you to position your Signage box at the optimal viewing height. It also features a cable management system to keep your cables organized and out of the way.

With its sleek design and durable construction, the LG ACC-S1-EH5C is the perfect solution for displaying your Signage box in any environment. Whether you're using it for commercial or personal use, the LG ACC-S1-EH5C is sure to meet your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents