• F18FC43 43”freezerworktable
• F18FC62 62”freezerworktable
• F18FC70 70”freezerworktable
• F18FC78 78”freezerworktable
• F18FC88 88”freezerworktable
F18FC
31.5” (80cm) Deep Self-Contained Freezer Base Work Tables
31.5” (80cm) Deep Self-Contained Freezer Base Work Tables
Project ______________________________________
Item ________________________________________
Quantity _____________________________________
CSI Section 11400
Approved ___________________________________
Date ________________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619 www.delfield.com
• Standard heavy duty units have unfinished ends
• Heavy duty stainless steel top construction
• Stainless steel refrigerated base interior back and
bottom
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane insulation keeps
energy costs low
• Base fronts are made of ABS plastic backed by
rigid polyurethane injection molded frames
• One epoxy coated shelf for each door
• Snap-in dart style vinyl magnetic gasket
• Recessed black plastic handles held in with a
positive lock system
• Heavy duty leg rails that run the entire length of
• Stainless steel end
• Stainless steel back
• Laminate facing (full front)
• Laminate end
• Laminate back
• Cutting board
• Tray rack
• Drawers in lieu of one door
• Locks
• Casters
• 220V/50 cycle*
* Inclusion of this option
will alter the electrical
specifications of the unit
the unit
• 6.12” adjustable full stainless steel legs and bullet
feet
• 8’ cord and plug supplied
• 36” standard work height
• Environmentally friendly HFC-404A refrigerant
• Hot gas defrost evaporators are standard
• Interior cabinet is cooled with mullion style
evaporator blower coils (coated) mounted
between each door/drawer section for very even
air and temperature control
• Interior freezer base cabinet will maintain 0° to -5°
temperatures at 100° ambient room temperature
meeting NSF requirements. Defrost is controlled
by the electronic thermostat
• One year parts and 90 day labor standard
warranty.
F18FC:
F18FC78
Options &
Accessories
Standard Features
Models
F18FC
NOTE: Unobstructed airflow must be maintained to
insure unit performance and maintain warranty.
19.00" [48cm]
Freezer
27.00" [69cm]
Freezer
19.00" [48cm]
Freezer
43.00" [110cm]
62.00" [157cm]
62.00" [157cm]
78.00" [198cm]
78.00" [198cm]
70.00" [178cm]
70.00" [178cm]
88.00" [224cm]
88.00" [224cm]
10.00"
[25cm]
14.00"
[35cm]
18.00"
[46cm]
18.00"
[46cm]
6.00"
[15cm]
6.00"
[15cm]
Elevation View
F18FC78
Elevation View
F18FC43
Elevation View
F18FC62
Elevation View
F18FC70
Elevation View
F18FC88
43.00" [110cm]
31.50"
[80cm]
31.50"
[80cm]
31.50"
[80cm]
Plan View
F18FC43
32.00" [81cm]
Freezer
32.00" [81cm]
Freezer
32.00" [81cm]
Freezer
32.00" [81cm]
Freezer
18.00"
[46cm]
6.00"
[15cm]
6.00"
[15cm]
18.00"
[46cm]
Plan View
F18FC62
Plan View
F18FC70
31.50"
[80cm]
Plan View
F18FC78
31.50"
[80cm]
Plan View
F18FC88
19.00" [48cm]
Freezer
19.00" [48cm]
Freezer
End View
All Models
26.31"
[67cm]
29.00"
[74cm]
36.00"
[91cm]
7.62"
[19cm]
6.13" [16cm]
31.50"
[80cm]
40.00"
[102cm]
F18FC
Mechanical Data Door Swing
Deleld reserves the right to make changes to the design or specications without prior notice.
Model NumberOf
Doors
Volume
Ft
3
ShelfArea
Ft
2
BTU
Load
BTU
System
H.P. V/Hz/Ph Amps ShipWeight
Lbs/Kg
Energy
KWH/Day
F18FC43
(1)19” 5.58 2.56 943 1558 1/3 115/60/1 10.0 425/193 3.18
F18FC62
(2)19” 12.21 5.12 1471 1776 1/2 115/60/1 12.0 495/225 5.02
F18FC70
19”&27” 15.00 6.51 1647 2713 3/4 115/60/1 16.0 575/261 5.73
F18FC78
(2)27” 17.79 7.90 1824 2713 3/4 115/60/1 16.0 645/292 6.5
F18FC88
(2)32” 21.28 9.64 2045 2713 3/4 115/60/1 16.0 715/324 7.67
43.00" [109cm]
14.00" [36cm]
18.00"
[46cm]
31.50"
[80cm]
C = Condensing Unit
J = Junction Box w/8ft (2.4m) Cord & Plug
Plan View
F18FC43
Plan View
F18FC62, F18FC70, F18FC78, F18FC88
C
J
C
J
30.00"
[76cm]
Clearance
25.00"
[64cm]
Clearance
17.00"
[43cm]
Clearance
19.00" [48cm] Door 27.00" [69cm] Door
32.00" [81cm] Door
Exterior Top is constructed of one piece stainless steel,
with integral 2.12” (5cm) square nosing on front and
4.00” (10cm) high by 2.00” (5cm) thick backsplash on rear.
Top is insulated with 2.00” (5cm) high density foamed in
place environmentally friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane.
Base interior has a stainless steel back and bottom. Interior
ends and door frames to be thermoformed ABS plastic. Base
is insulated with 1.50” (4cm) high density foamed in place
polyurethane.
Exterior back and bottom of base is constructed of
galvanized steel. Exterior ends are constructed of galvanized
steel.
Door(s) have a thermoformed plastic ABS plastic interior
liner and stainless steel exterior front. Door(s) have black
recessed handle(s) and a snap-in magnetic gasket which is
easily replaceable. Unit is furnished with (1) epoxy coated
wire shelf for each door section.
Base has a machine compartment, standard on the right,
with condensing unit and electrical junction box installed.
Machine compartment has a removable louver for access
to condensing unit. Blower coil(s) are located behind the
door mullions.
Refrigeration system uses HFC-404A refrigerant and
maintains 0°F (-18°C) to -5°F (-21°C).
Unit is mounted on 6.13” (16cm) high adjustable stainless
steel legs.
Electrical connections are 115 volts, 60 hertz, single phase.
Unit has an 8’ (2.4m) long cord and plug.
Specifications
F18FC
31.5” (80cm) Deep Self-Contained Freezer Base Work Tables
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSF18FC
09/11
OnlyModels
F18FC43,F18FC70
F18FC78,F18FC88
-
1
-
2
-
3
-
4
Delfield F18FC70 Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Argos Home JONAS User manual
-
Lucide Arabesque User guide
-
-
Ponte Giulio USA G55JBL19 Dimensions Guide
-
McCall MER65-G Owner's manual
-
Manitowoc NF316 Datasheet
-
-
Greenheck 462105 Support Mullions for use in Oversize Openings Operating instructions
-
Randell 65348-290 User manual
-
Fisher & Paykel 25310 User guide