Basic technical data sheet
G55JBL19
Stainless Steel
Code
Series
Use and installation info
Included with the product
Fasteners
16”x32” stainless steel L-shape grab bar with concealed flange plates, left
handed orientation. 1.25” diameter, 1.2mm wall thickness, 304 stainless
steel.
Packaging information
5.73
19-1/8 x 2-13/16 x 35-1/8
Dimensions [WxDxH] In.
Weight lb.
Available colours
N1 Satin
Use
Wall installation
clean with water and neutral products solvent-free and non-abrasive
Cleaning
331,00
Vertical lb.
In use weight capacity
Net weight lb.
5.73
19-1/8 x 2-3/4 x 35-1/8
Dimensions [WxDxH] In.
05/12/2011
Issued
27/04/2020
Revised
All herein data are subject to continuous technical updating. The manufacturer reserves the right to make change and
improvements to the product herein described without any previous notice.
© Ponte Giulio S.p.A. all rights reserved
US
/