SportsArt C576U User manual

Type
User manual
C576U 16” Repair Manual (Electronic)
Date: 2018/11/ V1.0
1-1.Product picture
1-1-1
1-2.Displays-C576U 16 in
1-2-1
1-3. Component placement - C576U 16”
Display
1-3-1
HTR Board
Control board
TV board
mother board
USB board
EUP<Power> key board
Ear jack board
NFC board
Bridge board for Blue teeth
1-3.Component placement - C576U 16” frame
1-3-2
Drive board
Speed sensor
Filter Model no. board
Electro-Magnet
1-3. Component placement - C576U 16”
1-3-3
AV board
EUP board
Filter
Power board
Electron magnet
1-4.Block diagram- C576U 16”
1-4-1
Control board
Drive Board
Filter
NFC
bridgeboard
Fan
HRC board
USB board
Eup
board
Breaker
/switch
<Power>
EUP Key board
Ear jack board
AV board
Power Jack
Power cord
Mother board
TV
board
TV Cable
WIFI Antenna
Blue teeth
HTR board
NFC Antenna
HTR Plate-L,A
HTR Plate-L, B
HTR Plate-R, B
HTR Plate-R, B
Rocker board
Handle-Resistance key (L)
Handle-Resistance key (R)
Electro-magnet
Speed sensor
Power
board
Model no. board
Touch Screen sets
1-4.Wiring schematic- C576U 16
1-4-2
<Power> key
1-5.Wiring connection- C576U 16” Console
1-5-1
To HTR board
To Drive board
To
USB board
To
polar board
To
Rocker board
T
o
(
handle
R
esistance key)
To
USB board
To EUP<Power>key
To SA WELL board
To mother board
To contr
ol board
To TV Coble
T
o mother board
To TFT Display
To TFT inverter
To Earphone jack
To TFT display
To AV board
To TV board
To AV board
To blue
-
teeth bridge board
To AV board
To
NFC
bridge board
1-5.Wiring connection - C576U 16” Console
1-5-2
To drive board & Power keyboard
To mother board
To HTR plate
To control board
To NFC bridge board
To mother board
To mother board &
control
board
To control board
1-5. Wiring connection - C576U 16” Drive board
1-5-3
To Alternator
TO Model no. board
To power board
To EUP<Power> key
& control bo
ard
To Speed sensor
To EUP
1-5.Wring connection – C576 16” Resistance key
1-5-4
RESISTANCE key
To control board
Rocker board
1-5.Wiring connection – AV board
1-5-5
Appearance
Main board
CSAFE
AV board
to Main board
N
et work
1-5.Wiring connection –EUP board
1-5-6
To
(Control boardEUP<Power> key
To Drive board
From Filter
1-5.Wiring connection –Power board
1-5-7
To EUP board
To drive board
1-6.Indicator led
-
Drive board
1-6-1
LED1
-
CLK led
LED2
-
heartrate led
LED 3 –COMM
Communication led
2-1. Electronic Malfunction Troubleshooting Chart -C576R 16”
Malfunction Circumstance Inspection and testing Components to replace
No start Display is not lit; display
shows no reaction and
does not light up.
1.Inspect the switch and the fuse wire
2.Check if all the cable is well-connected
3.Check the Display set
4.Inspect or replace Eup board, power board or the
Drive Board
1. Power switch, fuse
2. Display set
3. Eup board or Power board
4. Drive Board
No RPM Start exercising on the
unit; the display shows no
reaction; RPM values on
the display do not change.
1. Check if all the bus line is well-connected
2. Check or Clean the Speed sensor
3. Is the distance between the speed sensor and
the optical disk 5mm?
4. Replace the Driver Board
1.Speed sensor
2.Drive board
No resistance Press resistance up or
down keys; resistance
values change on the
display; but there is no
resistance.
1.Display idle.. Re-start the switch.
2.Check if the RPM value is displayed.
3.Check Electromagnet wire connection.
4.Check or Replace the Drive board set
1. Drive board
Wireless
(telemetry)
heart rate
malfunction
Wireless (telemetry) heart
rate malfunction
1. Replace polar heart rate transmitter.
2. Check or replace the Polar heart rate board
3. Check if there is any interference such as the
light or the speaker.
4. Replace control board.
1.Polar heart rate transmitter
2.Polar heart rate board
3.control board
HTR heart rate
Malfunction.
HTR heart rate
Malfunction.
1.Inspect the HTR cable connection.
2.Inspect the HTR LED indicators.
3.Replace the HTR board.
1.HTR board
2.HTR sensor plate
3.HTR cable
TV function
malfunction.
Cannot watch TV. 1. Check the signal source of the TV
2. Inspect TV settings and each scan all available
TV channels
3. Replace the TV board
4. Replace the Mainboard
1.TV board
2.Mainboard
2-1-1
Fan
malfunction
Press fan key , the fan
motor does not have any
reaction.
1. Check the fan and control board.
2. Replace control board.
3. Replace the fan motor
1. Control board
2. Fan motor
ERROR
8_1,8_2
The Displays shows
ERROR 8_1, 8_2
1. Check the Wiring between Display & Drive
Board
2. Replace control board.
3. Replace the Driver Board
1. Control board
2. Drive Board
Wired Network
malfunction
Cannot Use the Wired
Networking function
1. Check the signal source of the Wired Network
2. Check the Wired Network Wiring inside the
machine
3. Check the settings of the Wired Network
4. Check or replace the Mainboard
1. Wired Network bus line
2. Mainboard
WIFI Network
malfunction
Cannot Use the WIFI
Networking function
1. Check the source signal of the WIFI Network.
2. Check the settings of the WIFI Network
3. Check the WIFI antenna and the Mainboard
1.Mainboard
2. WIFI antenna
The video does
not have any
audio
There is no audio from the
video or the TV
1. Check the earphone set.
2. Replace the TV board
3. Replace the Mainboard
1. Earphone board
2. TV board
3. Mainboard
TFT screen
Faulty.
TFT screen malfunction 1. Check All Wiring
2. Replace the Mainboard
3. Replace TFT screen set.
1.Mainboard
2.TFT screen set
Touch screen
Faulty.
Touch screen malfunction.
1. Check Touch screen board connection.
2. Replace touch screen set.
1. TFT screen set
USB board
Faulty.
Cannot read data from the
USB Flash Drive or
update the Program
1. Use a USB Flash Drive Brand specified by
SPORTSART
2. Inspect the USB board connection.
3. Replace the USB board
1.USB board
2-1-2
Malfunction Circumstance Points for inspection and testing Components to replace
Malfunction of
Bluetooth
Cannot Use the Bluetooth
function
1. Check if the Bluetooth function is enabled
2. Check the Bluetooth board Wiring
3. Replace the Bluetooth board
1.the Bluetooth board
Malfunction of
the NFC
Cannot Use the NFC
function
The NFC function is disabled for now.
2-1-3
Troubleshooting
Model : C576U 16”
Malfunction : Unit will not start
Circumstance : The Display cannot boot.
Possible Causes: 1. The cable is not well-connected.
2.The fuse or switch is malfunctioning.
3.
Power board, EUP board or Drive board is malfunctioning.
4.
The Displays is malfunctioning
Troubleshooting 1.Inspect the power switch and the fuse.
2.Replace the Displays and test again
3.Inspect the EUP board, Power board.
4.Replace the Drive Board and test again
3-1-1
Display board
EUP board
Breaker/ SW / Filter
Power board
Drive board
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

SportsArt C576U User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI