2. CE TECH
  3. 5016-OR

CE TECH 5016-OR, 5016-WH, 5016-WH-10, 5016-WH-10PK, 5016-WH-25 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the CE TECH 5016-OR Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
□ □
1
Installation
2
Wiring scheme A is for residential.
Wiring scheme B is for commercial.
PLACING THE WIRES TERMINATING THE JACK
Installation Guide
Category 6 Jack
Item #1000015551, 1000015553, 1000015570,
1000981571, 1003119026, 1003102763
Model #5016
PACKAGE CONTENTS
A - (1) Category 6 Jack
TOOLS NEEDED
- Wire Cutters
*To meet TIA/EIA 568 standards, only use CAT 6 23AWG network cable.
Remove 2 1/2” of cable jacket and insert cable into
Cat 6 Jack using the wiring standards on the
diagram in Step 1.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Safety Information
B - (1) Punch Down Tool
C - (1) Plastic Dust Cover
B
A
□
3 TRIMMING THE WIRES
Use wire cutters to remove the excess wire. □
4 INSTALLING THE DUST COVER
Place Dust Cover (C) over jack and snap into place.
A
Brown/White
Brown
Orange
Orange/White
Blue
Blue/White
Green/White
Green
C
Brown/White
Brown
Green
Green/White
Blue
Blue/White
Orange/White
Orange
Diagram B
Diagram A
49MM
□
□
Punch down all wires on the jack (A) using the
included plastic punch-down tool (B).
*NOTE* Do not twist or break off excess wire.
*NOTE* Dust Cover (C) cannot be used to punch-down wires.
T568A
Wiring Standard
CAUTION: When using tools always follow the
manufacturer’s safety guidelines.
RoHS Compliant
/