Gibraltar Building Products PRCS4WG Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
PRCS4WG
Type
Operating instructions

This manual is also suitable for

4. Overlapping shingles can be sealed to the
vent base using an elastomeric sealant.
Do not use asphalt based roof cements.
2. Secure vent with four galvanized roofing
nails through provided holes in vent flange.
1. Carefully lift shingles above the vent hole.
3. Cover as much of the vent flange as possi-
ble with shingles. When nailing the roofing
material near the vent do not let fasteners
penetrate the vent flange.
Note: Be sure to remove the 1/4 inch screen if it is to be used as a dryer vent.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures
are in place. When working with power tools, gloves and eye protection are absolutely required.
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional,
and to check with your local building inspector or building permit office for approvals and possible variations that may apply.
PLASTIC ROOF CAP
INSTALLATION GUIDELINES
DO NOT USE STAPLES
1
4
3
2
  • Page 1 1

Gibraltar Building Products PRCS4WG Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
PRCS4WG
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents