2. Toro
  3. Chute Gate Kit, GrandStand Mower

Toro Chute Gate Kit, GrandStand Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Chute Gate Kit, GrandStand Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3403-305RevB
ChuteGateKit
GrandStand
®
Mower
ModelNo.133-1434
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Safety
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential
danger.Replaceanydecalthatisdamagedorlost.
117-8569
1.Operatordischargecontrol3.Closed
2.Open4.ReadtheOperator's
Manual.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3403-305*B
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removetheexistingside-discharge
chute.
Side-dischargechute
1
Bolt(5/16x7-1/2inch)
1
Locknut(5/16inch)
1
Spacer
1
2
Spring
1
Installtheside-dischargechute.
Handleassembly1
Bolt(3/8x1inch)
2
3
Nut(3/8inch)
2
Installthehandle.
4
Cabletie
3Routethecables.
5
Trashbag1Installthetrashbag.
1
RemovingtheExisting
Side-DischargeChute
NoPartsRequired
Procedure
1.Shutofftheengine,waitforallmovingpartstostop,
engagetheparkingbrake,andremovethekey.
2.Removethelocknut,bolt,spring,andspacerholding
thegrassdeectortothepivotbrackets(Figure1).
Removethegrassdeector.
Figure1
1.Bolt
4.Spring
2.Grassdeector
5.Locknut
3.Spacer
2
2
InstallingtheSide-Discharge
Chute
Partsneededforthisprocedure:
1
Side-dischargechute
1
Bolt(5/16x7-1/2inch)
1
Locknut(5/16inch)
1
Spacer
1
Spring
Procedure
WARNING
Anuncovereddischargeopeningcouldallowthe
machinetothrowobjectsatyouorbystandersand
resultinseriousinjury.Also,contactwiththeblade
couldoccur.
•Neveroperatethemachineunlessyouinstalla
coverplate,amulchplate,oragrasschuteand
catcher.
•Makesurethatthegrassdeectorisinthedown
position.
1.Alignthedischarge-chutebracketwithdeckbracket
andplacethenewspacerandspringontothegrass
deector(Figure2).
Note:InstalltheL-endofthespringbehindthedeck
edge.
Figure2
1.Bolt
4.Spring
2.Grassdeector
5.Locknut
3.Spacer6.Springinstalled
2.Installtheboltandnut.PlacetheJ-hookendofthe
springaroundthegrassdeector(Figure2).
3.Tightenthenutuntiltheendoftheboltisushwith
theendofthenut.
Note:Donotovertighten.
Important:Thegrassdeectormustbeableto
lowerdownintoposition.Liftthedeectorupto
testthatitlowersintothefulldownposition.
3
InstallingtheHandle
Partsneededforthisprocedure:
1Handleassembly
2
Bolt(3/8x1inch)
2
Nut(3/8inch)
Procedure
1.Releasethecushionandremovethefueltank;referto
theOperator’sManualforthemachine.
2.Usea3/8inchdrillbittodrillopenthe2holesonthe
leftsideofthemachineshowninFigure3.
Figure3
3
3.Installthehandleassemblytothemachineusing2
boltsand2nutsasshowninFigure4.
Figure4
1.Handleassembly3.Nut
2.Bolt
4.Installthefueltankandsecurethecushion;refertothe
Operator’sManualforthemachine.
4
RoutingtheCables
Partsneededforthisprocedure:
3
Cabletie
Procedure
1.Routethecablesacrossthemachine,infrontofthe
fueltank(Figure5).
Figure5
Enginenotshown
1.Fueltank
2.Cable
2.Routethecablesthroughtheengineplateandacross
themowerdeckasshowninFigure6.
Figure6
Enginenotshownincalloutbubble
1.Engineplate2.Mowerdeck
4
3.Removethenutsfromthecables.
4.Threadthecablesthroughthereardischarge-chute
bracket(Figure7).
Note:Routethecablethatisontheleftsideofthe
handleassemblythroughtheleftsideofthebracket;
routetheothercablethroughtherightside.
Figure7
1.Discharge-chutebrackets2.Pulley
5.Install1nutoneachcable.
6.Threadthecablesthroughthefrontbracketandinstall
theothernutsontothecable(Figure8).
Figure8
1.Nut
3.Slotsinpulley
2.Thecablesarenotloose.
7.Slidetheendsofthecablesintotheslotsinthepulley
(Figure8).
8.Adjustthenutsonthecablessothatthecablesarenot
loosebetweenthebracketandpulley(Figure8).
9.Ensurethatthechutedoorisparalleltothedeckand
thatthemowerbladedoesnotcontactitwhenyou
movethechute-controlhandletotheClosedposition;
adjustthecablesasnecessary.
10.Usethecabletiestosecurethecablestothefanguard
andawayfrommovingparts(Figure9).
Figure9
Enginenotshownincalloutbubble
1.Cabletie
5
InstallingtheTrashBag
Partsneededforthisprocedure:
1Trashbag
Procedure
Installthetrashbagintotheslotsinthehandleassembly
(Figure10).
Figure10
1.Trashbag
2.Slotsinhandleassembly
5
Operation
UsingtheChuteGate
CAUTION
Thechutegatedoesnotsealthedischarge
opening.Grassandobjectsmaybethrowntoward
bystanders,resultinginseriousinjury.
•Beawareofthemowerdischargedirectionand
donotpointitatanyone.
•Removeobstaclessuchasrocks,treelimbs,etc.
fromthemowingarea.
•Neverputyourhandsorfeetunderthemower
ordischargearea.
•Nevertrytoclearthedischargeareaormower
bladesunlesstheengineisoffandyouremove
thekey.
Usethechutegatetotemporarilystopordeectgrass
clippingsawayfromsidewalks,parkinglots,patios,or
anywhereyoudonotwantgrassclippingstoland.Thechute
gatehas3positions:open,45degreeangle,andclosed.
•Rotatethechutegatehandletotheopenpositiontoallow
grassclippingstodischarge(Figure11).
•Rotatethechutegatehandletothe45degreeangleto
deectthegrassclippings(Figure11).
•Rotatethechutegatehandletotheclosedpositionto
stopthegrassclippings(Figure11).
Figure11
1.Chutegateopen3.Chutegateclosed
2.Chutegateat45degree
angle
6
Notes:
7
/