Toro Operator-Controlled Discharge Chute Kit, GrandStand Mower Installation guide

Toro
Brand
Toro
Model
Operator-Controlled Discharge Chute Kit, GrandStand Mower
Type
Installation guide
FormNo.3365-901RevB
Operator-ControlledDischargeChuteKit
GrandStand
®
Mowerwith48-inch,52-inchor60-inchCuttingUnit
ModelNo.119-7292
InstallationInstructions
Safety
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof
potentialdanger.Replaceanydecalthatisdamagedorlost.
108-4102
1.Operatordischargecontrol3.Closed
2.Open4.ReadtheOperator's
Manual.
108-7250
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removetheexistingsidedischarge
chute.
Sidedischargechute
1
Bolt,(5/16x7–1/2inches)
1
Locknut,(5/16inch)
1
Plasticspacer1
2
Spring
1
Installthesidedischargechutewith
gate.
Handleassembly1
Bracket1
Bolt,(3/8x1inch)(Selftapping)
4
3
Plasticcabletie1
Installthehandle.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
ProcedureDescription
Qty.
Use
4
Trashbag1Installthetrashbag.
5
Internationaldecal1
Installthedecalforinternationalmowers
only.
1
RemovingtheExistingSide
DischargeChute
NoPartsRequired
Procedure
1.DisengagethePTO,settheparkingbrake,andchock
orblockthedrivewheels.
2.Turnofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Removethelocknut,bolt,springandspacerholding
thedeectortothepivotbrackets(
Figure1).
Removethegrassdeector.
Figure1
1.Bolt
5.Springinstalled
2.Spacer6.GrassDeector
3.Locknut
7.Lendofspring,place
behinddeckedgebefore
installingbolt
4.Spring8.Jhookendofspring
2
InstallingtheSideDischarge
ChutewithGate
Partsneededforthisprocedure:
1
Sidedischargechute
1
Bolt,(5/16x7–1/2inches)
1
Locknut,(5/16inch)
1Plasticspacer
1
Spring
Procedure
WARNING
Anuncovereddischargeopeningcouldallowthe
lawnmowertothrowobjectsintheoperator'sor
bystander'sdirectionandresultinseriousinjury.
Also,contactwiththebladecouldoccur.
•Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschuteand
catcher.
•Makesurethegrassdeectorisinthedown
position.
Note:Ensurethegrassdeectorisinstalledinthe
lowerholesinthemowerdeckbrackets.
1.Placethenewspacerandspringontograssdeector.
Placeoneendofspringbehinddeckedge.
Note:Makesuretheendofthespringisinstalled
behindthedeckedgebeforeinstallingtheboltas
shownin
Figure2.
2.Installboltandnutinthelowerhole.Placetheend
ofthespringaroundthegrassdeector(
Figure2).
3.Tightenthenutuntiltheendoftheboltisushwith
theendofthenut.Donotovertighten.
Important:Thegrassdeectormustbeableto
lowerdownintoposition.Liftthedeectorup
totestthatitlowersintothefulldownposition.
2
Figure2
1.Bolt
4.Spring
2.Spacer5.Springinstalled
3.Locknut
6.GrassDeector
3
InstallingtheHandle
Partsneededforthisprocedure:
1Handleassembly
1Bracket
4
Bolt,(3/8x1inch)(Selftapping)
1Plasticcabletie
Procedure
1.Installthebrackettotherightsideofthemachine
with2bolts(3/8x1inch)(
Figure3).Thebolts
arethreadformingbolts.Theholesdonotrequire
tapping.
2.Installthehandleassemblytothebracketwith2
bolts(3/8x1inch)(
Figure3).Theboltsarethread
formingbolts.Theholesdonotrequiretapping.
g013729
1
4
5
Figure3
1.Bolt,(3/8x1inch)
4.Handleassembly
2.Bracket5.Bracketinstalled
3.Rightsideofmachine
3.Fastenthecablestothehydraulichoseswithaplastic
tie(Figure4).Ensurethecablesdonotcontactthe
reartire.
g013730
1 2
3
Figure4
1.Cables
3.Handleassembly
2.Plasticcabletie
3
4
InstallingtheTrashBag
Partsneededforthisprocedure:
1Trashbag
Procedure
Installthetrashbagintotheslotsinthehandleassembly
(
Figure5).
Figure5
1.Trashbag
2.Slotinhandleassembly
5
InstallingtheDecalfor
InternationalMowersOnly
Partsneededforthisprocedure:
1Internationaldecal
Procedure
Installthedecalovertheexistingdecal(Figure6).
Figure6
1.Existingdecal3.Internationaldecal
2.Handle
4
Operation
UsingtheChuteGate
CAUTION
Thechutegatedoesnotsealthedischarge
opening.Grassandobjectsmaybethrownina
bystander'sdirectionandresultinseriousinjury.
•Beawareofthemowerdischargedirectionand
donotpointitatanyone.
•Removeobstaclessuchasrocks,treelimbs,etc.
fromthemowingarea.
•Neverputyourhandsorfeetunderthemower
ordischargearea.
•Nevertrytoclearthedischargeareaormower
bladesunlesstheengineisoffandthekeyis
removed.
Usethechutegatetotemporarilystopordeectgrass
clippingsawayfromsidewalks,parkinglots,patios,or
anywhereyoudonotwantgrassclippingstoland.The
chutegatehas3positions:open,45degreeangle,and
closed.
•Rotatethechutegatehandletotheopenpositionto
allowgrassclippingstodischarge(
Figure7).
•Rotatethechutegatehandletothe45degreeangle
todeectthegrassclippings(Figure7).
•Rotatethechutegatehandletotheclosedposition
tostopthegrassclippings(
Figure7).
g013744
Figure7
1.Chutegateopen3.Chutegateclosed
2.Chutegateat45degree
angle
5
Notes:
6
Notes:
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Toro Operator-Controlled Discharge Chute Kit, GrandStand Mower Installation guide

Toro
Brand
Toro
Model
Operator-Controlled Discharge Chute Kit, GrandStand Mower
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents