Mircom LT-2025MIR RB-FX2200MB RB-FX2200DB Installation guide
- Type
- Installation guide
INSTALLATION INSTRUCTIONS
RB-FX2200MB/RB-FX2200DB Main
Board for FX-2200 Fire Alarm Control Panel
Replacement for damaged Main Board.
Parts List
• Qty 1 ... RB-FX2200MB/RB-FX2200DB Main Board Main Board
Installing the RB-FX2200MB/RB-FX2200DB Main Board
The Main Board has removable terminal blocks which make installing a replacement
easy. If possible, upload the panel’s database before beginning.
1. Power down the panel.
2. Disconnect the bridge rectifier harness and battery harness.
3. Disconnect the pluggable portion of TB’s 1-5.
4. Unplug the Expansion Module Harness (CON3), DACT/City Module Harness
(CON4) and Main Display (CON5).
5. Remove all screws and lock washers securing the Main Board to the back plate.
6. Remove the damaged Main Board and replace with the RB-FX2200MB/RB-
FX2200DB.
7. Secure the new Main Board with the screws and lock washers from the damaged
one .
8. Re-connect AC wiring and terminals.
9. Power up the panel.
10. Download the panel database.
NOTE: This is a replacement module for a damaged board. Battery calculations
do not have to be updated.
In no event shall Mircom be liable for any direct, indirect or consequential damages,
loss of anticipated profits, loss of time or any other losses incurred by the buyer in
connection with the purchase, installation or operation or failure of this product.
Important!
Mircom recommends that the entire system be completely tested on a regular basis.
However, despite frequent testing and due to but not limited to, criminal tampering or
electrical disruption, it is possible for this product to fail to perform as expected.
LT-2025MIR Rev. 0
Canada
25 Interchange Way
Vaughan, ON, L4K 5W3
Tel: (888) 660-4655
Fax: (888) 660-4113
www.mircom.com
USA
60 Industrial Parkway
Cheektowaga, NY, 14227
Tel: (888) 660-4655
Fax: (888) 660-4113
Dead Front Mounting Plate
DISPLAY BD
Con 5
TB1
Con 3
Com4
TB5
TB2TB3TB4
MAIN BOARD
NAC BD
OR RELAY BD
DACT BD
OR
CITY BD
NAC BD
OR
RELAY BD
NAC BD
OR
RELAY BD
DISPLAY HARNESS
LED DISPLAY
RECTIFIER
XFORMER
+-
BATTERY
XFORMER
(optional)
T/B
+-
BATTERY
Replace RB-FX2200MB/RB-FX2200DB Main Board
Figure 1. RB-FX2200MB/RB-FX2200DB Replacement Main Board Installation
FX-2200 Panel Layout
-
1
-
2
Mircom LT-2025MIR RB-FX2200MB RB-FX2200DB Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Mircom LT-2024MIR MR-XPS Installation guide
-
-
-
-
-
-
-
-
-
