AAXA M5 User manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause

injury or death.

DO NOT use while driving

DO NOT expose to water or wet

surfaces. Electric shock may occur.

DO NOT expose the projected LED

image to your eyes or the eyes of

others

DO NOT block or restrict airow

from ventilation holes as this may

cause the projector to overheat

Keep the projector, battery, or

charger away from any heat sources

Caution for Battery Use

• Do not pierce or puncture the battery

with sharp objects

• Do not heat the product or expose it to

high temperature.

• Do not wet it or place it in any liquid

Caution for Headphone Use

• Prolonged use at high volume may

impair your hearing.

• High volume during walking or driving

may cause distractions and result in

injury or death

Table of Contents

Chapter 1: M5 at a Glance

M5 Introduction

Remote & Keypad

Accessories

Chapter 2: Getting Started

Powering On / Off

Focus Adjustment / Throw

Distance

External Input/Outputs

Connecting to a Computer VGA

Connecting to a Computer HDMI

Connecting to Composite Video

Connecting to HDMI Video

Connecting to Speaker or

Headphones

Connecting a Micro SD Card

Connecting a USB Stick

Chapter 3: Menu Screens

Main Menu

Video Player Menu

Photo Viewer Menu

Music Player Menu

Text Viewer Menu

Chapter 4: Setup Menu

Settings

Brightness Feature

Keystone

Chapter 5: Technical Details

Troubleshooting

Specications

Notes

1

2

3

4

5

6

9

11

13

15

17

18

20

22

23

27

31

34

35

40

41

43

45

46

M5 at a Glance

1

Chapter 1

Power Switch

Micro SD Card

HDMI

USB Port

Main Unit Front/Back

VGA Port

Power Button

Focus Adjustment

AV Port

Headphone Out

Power On/Off

DC Port

Infrared Receiver

(Remote Control)

Remote & Keypad

2

NOTE: Pressing power on the remote will only put the projector in STANDBY mode.

Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector

off.

Power On/Off

Select Source

Input Exit/Back

Direction Pad

Both the keypad and remote can be used to navigate through the menus. The Main Menu

Navigation on the remote functions exactly the same as the directional pad on the M5 unit.

On / Off

LED Lights

OK

Main Menu

Navigation

Keystone

Media Player

Menu Navigation

Keystone

Volume Up

Volume Down

Remote

Accessories

3

*Under various circumstances, the actual accessories may be different from

those shown in the pictures above.

Additional accessories are availbale for purchase at www.aaxatech.com

Tripod

Remote

Power Adapter

A/V Cable

Carrying Case

Getting Started

1. Connect the power cord to the M5.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position --the

projector should automatically turn on.

4. If the projector does not automatically turn on with the “Power Switch” toggled to the

“ON” position, press the “ON/OFF POWER” button on the keypad and hold for

2-3 seconds to start the projector.

4

Powering ON the projector

Chapter 2

Powering OFF the projector

Standby Mode

1. To transition to “STANDBY” mode, press the power button on the keypad or the

remote control.

2. The optical engine should power off and the fan should stop spinning. The projector

is now in “STANDBY” mode and can be turned on using the remote control.

*Note: Standby mode will still consume a small amount of power.

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will

fully turn off the projector.

Focus Adjusment / Throw Distance

5

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

Throw Distance

Units: Inches

20

30

40

50

60

70

80

90

Diagonal Size

Units: Inches

19

29

38

48

57

67

76

86

• Spin the focus wheel up or down until the image becomes

clear.

Focus Adjustment

Throw Distance Chart

Throw Ratio 1.20

Projection Angle: 100% Offset

*minimum throw distance: 10 inches

6

External Inputs and Outputs

Headphones/speakers

Composite Cable

HDMI

VGA

USB Stick

MicroSD

Connecting to a Computer via VGA

9

Connect one end of the VGA Cable

to your computer’s VGA Adapter.

Step 1:

Step 2:

Step 3:

In the Main Menu Select the “Inputs” icon and then the “VGA” Icon.

Connect the other end of the

VGA Cord to your M5’s VGA port.

Select “VGA” icon Select “INPUT” icon

Connecting to a Computer Cont.

Step 4:

Enabling VGA on your Computer – To enable VGA output on your computer most computers

require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable VGA output. Below are standard instructions for a Win-

dows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option.

*NOTE: different operating sys-

tems may differ

Step 5:

1. Right click on computer

desktop and select “Screen

Resolution”

2. Display Properties window

will pop up

3. If a secondary monitor is

grayed out, click on it and se-

lect “Extend these displays”

in the “Multiple Displays” drop

down

4. If the image is blurry or the

text is not legible, adjust

the screen resolution. We

recommend 1280x800.

Step 6:

10

Connecting to a Computer via HDMI

11

Connect one end of the HDMI Cable

to your computer’s HDMI Adapter.

Step 1:

Step 2:

Step 3:

In the Main Menu Select the “Inputs” icon and then the “HDMI” Icon.

Connect the other end of the HDMI

Cord to your M5’s HDMI port.

Select “INPUT” icon Select “HDMI” icon

Connecting to a Computer Cont.

Step 4:

Enabling HDMI output on your Computer – To enable HDMI output on your computer most comput-

ers require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable HDMI output. Below are standard instructions for a

Windows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option.

*NOTE: different operating sys-

tems may differ

Step 5:

1. Right click on computer

desktop and select “Screen

Resolution”

2. Display Properties window

will pop up

3. If a secondary monitor is

grayed out, click on it and se-

lect “Extend these displays”

in the “Multiple Displays” drop

down

4. If the image is blurry or the

text is not legible, adjust

the screen resolution. We

recommend 1280x800.

12

Step 6:

Connecting to Composite Video

13

Connect the 3.5mm Composite A/V

Cable to the back of the M5.

Connect the composite end of

the AV Cable (Red, White,Yellow)

to your device.

Step 1:

Step 2:

Connecting to Composite Video Cont.

Connectivity with multimedia devices

The M5 can connect to many media devices including: iPod, iPhone, iPad, VHS

players, DVD players, Blu-Ray players, smart phones, cameras, video game con-

soles and other peripherals with ease.

*Some smart phones require video out capabilities to be displayed with the M5. Check with

your phone manufacturer.

14

In the Main Menu

Turn on your multimedia device.

Select “INPUT” icon Select “RCA”

Step 3:

Step 4:

Connecting to HDMI Video

15

Connect one end of the HDMI to

your M5’s HDMI Adapter

Step 1:

Step 2:

Connect the opposite end of

the HDMI cable to your device.

Note: Apple devices require a specialized

HDMI adapter (Sold separately by

Apple)

Connecting to HDMI Video Cont.

Connectivity with multimedia devices

The M5 can connect to many media devices including: iPod, iPhone, iPad, VHS

players, DVD players, Blu-Ray players, smart phones, cameras, video game con-

soles and other peripherals with ease.

*Some smart phones require video out capabilities to be displayed with the M5. Check with

your phone manufacturer.

16

Step 3:

In the Main Menu

Turn on your multimedia device. If available select 1280x800 or 1920x1080.

Step 4:

Select “HDMI” iconSelect “INPUT” icon

Connecting Speakers / Headphones

17

Connect your speakers/headphones

to the projector’s audio port.

Step 1:

Step 2:

*CAUTION: Prolonged use of headphones at a high

volume may impair hearing.

Ensure that the projector and/or

the headphones are powered on.

Step 3:

Place the headphones on and enjoy!

Connect your speakers/headphones

to the projector’s audio port.

Ensure that the projector and/or

the headphones are powered on.

Micro SD Card

18

How to insert your Micro SD Card

• Slide in your SD card into the SD card

slot on the side of the M5 (facing down

as shown in picture).

• Gently slide the SD card until it clicks

into place.

*Review the Specication

section of this manual to read

about the supported le

formats.

How to access your Micro SD Card

• Once your SD Card has been inserted,

you can navigate to any media content

in the main menu.

• After selecting the media content,

choose the SD card selection.

• You can now access the data on your

SD card through the onboard media

player

Microsoft Ofce and PDF le formats are not supported.

To view a slideshow convert your slideshow into JPEG

pictures rst.

Note:

(up to 32 GB)

19

Micro SD Card Cont.

Return: Brings you

back to the main

menu

File Menu System

• The M5 will show all folders and les

you have on your SD Card in the C:

drive.

• Use the directional buttons to navigate

to different folders or les.

Media Player menu

• In the main menu select the type of le

you wish to play.

• Select the MicroSD icon to acess your

les.

Page is loading ...

AAXA M5, M5 HD LED Pico Projector User manual

Related papers

Other documents