AAXA P6 LED Pico Projector User manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause

injury or death.

DO NOT use while driving

DO NOT expose to water or wet

surfaces. Electric shock may occur

DO NOT expose the projected LED

image to your eyes or the eyes of

others

DO NOT block or restrict airow

from ventilation holes as this may

cause the projector to overheat

Keep the projector, battery, or

charger away from any heat sources

Caution for Battery Use

• Do not pierce or puncture the battery

with sharp objects

• Do not heat the product or expose it to

high temperature.

• Do not wet it or place it in any liquid

Caution for Headphone Use

•

Prolonged use at high volume may impair your

hearing

• High volume during walking or driving may

cause distractions and result in injury or death

Table of Contents

Chapter 1: P at a Glance

P Introduction

Remote

& Keypad

Accessories

Chapter 2: Getting Started

Powering On / Off

Focus Adjustment / Throw

Distance

External Inputs/Outputs

Connecting to a Computer VGA

Connecting to a Digital Input

Connecting to Composite Video

Connecting to Digital Input Video

Connecting to Speakers or

Headphones

Connecting a TF Card

Connecting a USB Stick

Chapter 3: Menu Screens

Main Menu

Video Player Menu

Photo Viewer Menu

Music Player Menu

Text Viewer Menu

Chapter 4: Setup Menu

Settings

Keystone Feature

Chapter 5: Technical Details

Troubleshooting

Specications

Notes

1

2

3

4

5

6

7

9

11

13

15

16

18

21

22

26

30

33

34

39

41

43

44

P at a Glance

1

Chapter 1

Power Switch

TF Card Slot

Digital Input Port

USB Port

Main Unit 6LGH/Back

Mini-VGA Port

Focus Adjustment

AV Port

Headphone Out

Power On/Off

Main Menu Navigation

DC Port

Remote & Keypad

2

Power On/Off

Source Menu

Both the keypad and remote can be used to navigate through the menus. The Main Menu

Navigation on the remote functions exactly the same as the directional pad on the P6 unit.

Main Menu Navigation

Media Player

Menu Navigation

Volume Up

Volume Down

Remote

Home

Back

NOTE: Pressing power on the remote will only put the projector in STANDBY mode.

Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector off.

Input Exit/Back

Direction Pad

On / Off

LED Lights

OK

Keystone

Accessories

3

*Under various circumstances, the actual accessories may be different from

those shown in the pictures above.

Additional accessories are available for purchase at www.aaxatech.com

Remote

Power Adapter

A/V Cable

Tripod

VGA $GDSWHUCable

Getting Started

1. Connect the power cord to the P6.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position -- the

projector should automatically turn on.

4. If the projector does not automatically turn on with the “Power Switch” toggled

to the “ON” position, press the “ON/OFF POWER” button on the keypad and

hold for 2-3 seconds to start the projector.

4

Powering ON the projector

Chapter 2

Powering OFF the projector

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will

fully turn off the projector.

Focus Adjusment / Throw Distance

5

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

Throw Distance

Units: Inches

19

29

38

48

57

67

76

86

Diagonal Size

Units: Inches

20

30

40

50

60

70

80

90

• Spin the focus wheel up or down until the image becomes

clear.

Focus Adjustment

Throw Distance Chart

Throw Ratio 1.2

Projection Angle: 100% Offset

*minimum throw distance: 16 inches

6

External Inputs and Outputs

Headphones/speakers

Composite Cable

Digital Input

Mini-VGA

USB Stick

TF Card

Connecting to a Computer via VGA

7

Step 3:

In the Main Menu, select the “Inputs” icon and then the “VGA” Icon.

Step 1:

Connect one end of the VGA Cable

to your computer’s VGA &RQQHFWRU.

Step 2:

Connect the other end of the VGA

Cable to your P6’s VGA port.

Select “VGA” icon Select “INPUT” icon

Connecting to a Computer Cont.

Step 4:

Enabling VGA on your Computer – To enable VGA output on your computer, most computers

require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable VGA output. Below are standard instructions for a Win-

dows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option

*NOTE: different operating sys-

tems may differ

Step 5:

1. Right click on \RXcomputer

desktop and select “Screen

Resolution”

2. Display Properties window will

pop up

3. If a secondary monitor is

grayed out, click on it and se-

lect “Extend these displays” in

the “Multiple Displays” drop

down

4. If the image is blurry or the

text is not legible, adjust the

screen resolution. We

recommend 1280x800

Step 6:

8

Connecting to a Computer via Digital Input

9

Step 3:

In the Main Menu, select the “Inputs” icon and then the “Digital Input” Icon.

Step 1:

Connect one end of the Digital Input Cable

to your computer’s Digital Input SRUW

Step 2:

Connect the other end of the Digital Input

Cable to your P6's Digital Input port.

Select “INPUT” icon Select “DIGITAL INPUT” icon

Connecting to a Computer Cont.

Step 4:

Enabling Digital Video output on your Computer – To enable Digital Video output on your computer

most computers require “turning on” the video output feature. Each computer is different. Please

consult your owner’s manual for instructions to enable Digital Video output. Below are standard

instructions for a Windows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option

*NOTE: different operating sys-

tems may differ

Step 5:

1. Right click on computer

desktop and select “Screen

Resolution”

2. Display Properties window will

pop up

3. If a secondary monitor is

grayed out, click on it and se-

lect “Extend these displays” in

the “Multiple Displays” drop

down

4. If the image is blurry or the

text is not legible, adjust the

screen resolution. We

recommend 1280x800

10

Step 6:

Connecting to Composite Video

11

Connect the composite end of

the AV Cable (Red, White,Yellow)

to your device.

Step 1:

Connect the 3.5mm Composite AV

Cable to the back of the P

6.

Step 2:

Connecting to Composite Video Cont.

12

In the Main Menu

Turn on your multimedia device.

Connectivity with multimedia devices

The P6 can connect to many media devices including: VHS players, DVD players,

cameras, video game consoles and other peripherals with ease.

Select “INPUT” icon

Select “RCA”

Step 3:

Step 4:

Turn on your multimedia device.

Connecting to Digital Video Input

13

Connect one end of the Digital

Input Cable (purchased

separately) to your device’s

Digital Input port.

Step 1:

Step 2:

Connect the other end of the

Digital Input Cable to your

P6’s Digital Input port.

Note: Apple devices require a specialized

Digital Input adapter (Sold separately

by Apple)

Connecting to Digital Video Input Cont.

14

Step 3:

In the Main Menu

Turn on your multimedia device. If available, select 1280x800.

Connectivity with multimedia devices

The P6 can connect to many media devices including: L3RGL3KRQHL3DG

DVD players, %OX5D\3OD\HUVVPDUWSKRQHVcameras, video game consoles

and other peripherals with ease.

Step 4:

Select “DIGITAL INPUT” Icon

Select “INPUT” icon

*Some smart phones require video out capabilities to work with the P6. Check with your

phone manufacturer.

Connecting Speakers / Headphones

15

Connect your speakers/headphones

to the projector’s audio port.

Step 1:

Step 2:

*CAUTION: Prolonged use of headphones at a high

volume may impair hearing.

Ensure that the projector and/or

the headphones are powered on.

Step 3:

Place the headphones on and enjoy!

Connect your speakers/headphones

to the projector’s audio port.

Ensure that the projector and/or

the headphones are powered on.

TF Card

16

How to insert your TF Card

• Slide in your TF card into the TF card

slot on the side of the P6 (facing down

as shown in picture).

• Gently slide the TF card until it clicks

into place.

*Review the “Specications”

section of this manual to read

about the supported le

formats.

How to access your TF Card

• Once your TF Card has been inserted,

you can navigate to any media content

category in the main menu.

• After selecting the media content cat-

egory, choose the TF card selection.

• You can now access the data on your

TF card through the onboard media

player

Microsoft Ofce and PDF le formats are not supported.

To view a slideshow, convert your slideshow into JPEG

pictures rst.

Note:

(up to 32 GB)

17

TF Card Cont.

Return: Brings you

back to the main

menu

File Menu System

• The P6 will show all folders and files

you have on your TF Card in the C:

drive.

• Use the keypad to navigate to differ-

ent folders or files.

Media Player menu

• In the main menu select the type of le

you wish to play.

• Select the TF Card icon to acess your

les.

Page is loading ...

AAXA P6 LED Pico Projector User manual

This manual is also suitable for

AAXA P6 LED Pico Projector User manual

Related papers

Other documents