Pinecroft FLBDO Installation guide

Brand
Pinecroft
Model
FLBDO
Type
Installation guide

This manual is also suitable for

Pinecroft FLBDO is a versatile device that offers a range of capabilities to enhance your home décor. Its sturdy construction, made from durable materials, ensures longevity and reliability. With its user-friendly design, you can effortlessly install it to elevate the functionality and aesthetics of your space. Whether you're looking to mount artwork, shelves, or even heavy mirrors, Pinecroft FLBDO provides a secure and stylish solution. Its adjustable features allow you to customize the mounting height and position, ensuring a perfect fit for your décor.

Pinecroft FLBDO is a versatile device that offers a range of capabilities to enhance your home décor. Its sturdy construction, made from durable materials, ensures longevity and reliability. With its user-friendly design, you can effortlessly install it to elevate the functionality and aesthetics of your space. Whether you're looking to mount artwork, shelves, or even heavy mirrors, Pinecroft FLBDO provides a secure and stylish solution. Its adjustable features allow you to customize the mounting height and position, ensuring a perfect fit for your décor.

Barndoor Fluted Mounting Board Installation Instructions
Tools & Hardware Needed
You will need a Pencil, Phillips head screwdriver, tape measure, Drill, Drill bits, Stud Finder
Squaring tool, 4ft Level, and Safety glasses. 3” deck screws or lag bolts
H
Installation
Identify and mark the location of the wall studs to which the
mounting board will be secured.
Using the level and square, position the horizontal center-
line of the mounting board at the same position of the cen-
terline of the door rail. Consult your hardware instructions
to determine this height(H). Depending on the height of
your barndoor, you may need to remove the door header
casing and cut the side casing horizontally to member to
the bottom of the mounting board.
Determine the vertical centerline (V) of the barndoor rail
and use this certerline to position the center of the mounting
board. Locate the mounting board on the wall, mark and
predrill a 1/8” pilot hole through the mounting board at the
location of the wall studs.
S
ecure the mounting board to wall studs with 3” deck screws driven slightly below the surface of
the wood. This will be holding a lot of weight, so make sure there is good contact with the studs
when installing the mounting board. If you prefer, using lag bolts will ensure a secure base to in-
stall your track system. Locating the board mounting screws behind the position of the barndoor
rail will help hide these indentions. The optional rosette end caps may then be finish nailed and/or
glued to the wall at the ends of the mounting board.
Fill the screw heads with wood filler and paint the mounting board to match or compliment the wall
color. For the unfinished oak board, be sure to use a stainable putty for patching. Your oak board
can then be stained to match the door and/or trim. See additional finishing tips below.
When mounting the hardware rail, be sure to mark each hole and predrill a pilot hole 1/8” smaller
than the diameter of the rail mounting screws.
Finishing Tips
It is often desirable that the board and optional rosette end caps be painted or stained prior to in-
stallation and then finished with a touch up coat following installation prior to mounting hardware.
Please note that primed boards have been professionally touched up to cover surface blemishes
and are prepared to receive your finish color application. The primer is not a finish application.
For matching stain finishes from the oak mounting board to a door of alternate species, an initial
application of a pre-stain wood conditioner can be very beneficial. Your Home Depot paint
specialist can provide additional tips and helpful advice.
V
  • Page 1 1

Pinecroft FLBDO Installation guide

Brand
Pinecroft
Model
FLBDO
Type
Installation guide
This manual is also suitable for

Pinecroft FLBDO is a versatile device that offers a range of capabilities to enhance your home décor. Its sturdy construction, made from durable materials, ensures longevity and reliability. With its user-friendly design, you can effortlessly install it to elevate the functionality and aesthetics of your space. Whether you're looking to mount artwork, shelves, or even heavy mirrors, Pinecroft FLBDO provides a secure and stylish solution. Its adjustable features allow you to customize the mounting height and position, ensuring a perfect fit for your décor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents