Feiss F3218/10SMS Installation guide

Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Landen 10 Light Linear Chandelier
1.1
F3218-10
Chandelier
F3218
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Determine the height of the fixture with provided stems and assemble them by screwing them together.
NOTE: After stems have been screwed to canopy, ensure canopy hex nuts are tightened.
Install the fixture arms by hooking them to the loops on the hub and fixture.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install candle tube by slipping through socket.
Install the candle followers by placing them on top of the candle tubes
Insert the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
2
3
4
5
STEM ASSEMBLY
1
1
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
6
LAMP
HUB
LOOP
LOOP
6
FIXTURE ARM
CANDLE FOLLOWER
CANDLE
SOCKET
5
4
2
2
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 60077IL
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss F3218/10SMS Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI