ESAB Missing Hub Disc/ MM250 Troubleshooting instruction

www.esabna .com

DATE: June 27,2007 BULLETIN NO: M_07_002

TITLE/ PRODUCT NAME: Missing Hub Disc/ MM250

RATING:

_ DIRECTIVE XX ALERT

(Action is Required) (Potential Problem)

XX INFORMATION _ _ PRODUCT IMPROVEMENT

(Action is Optional) (Enhanced Product)

XX General Distribution _

_ Business Confidential

(Unrestricted) (Restricted Distribution)

PRODUCT SERIES/ MODEL: MM250

SERIAL NO: MBLJ720008 through MBLJ723036

SUMMARY: Missing disk from Wire Hub—Machines matching the serial numbers above may

be missing one of the two brake discs used to stop the wire reel when the torch trigger is

released.

OPERATIONAL IMPACT: The remaining disc will wear faster.

ACTION: Customers with known affected machines will be supplied with the missing part,

however if you find a unit that is missing a brake disc, contact the Technical Support Group

(phone number below) with the machine serial number and a part will be supplied.

CONTACT:

ESAB Welding & Cutting Products

Technical Support Group

843-664-4416 Phone

843-664-5539 FAX