Smart Weigh FBA_ACE200 User manual

Shipping and Postal Scale Manual

Copyright

©

2015 Smart Weigh™

Product Manual

Index

English .............................................. 3

Español ............................................. 7

Francais ............................................ 11

Italia .................................................. 15

Deutsch ............................................. 19

3

Product Manual

Getting Started

Our team at Smart Weigh thanks you for purchasing the Smart Weigh Shipping and Postal

Scale. Our goal is to bring you precision measuring devices that will ensure many years of

quality and reliability. Please read through the safety and operating guidelines for optimal

performance. Keep this manual and warranty for future reference.

• Always weigh on a ﬂat and leveled surface, free from vibrations and drafts. e corner of

a room is usually the most stable.

• Avoid exposure to extreme heat or cold. Scales perform best at normal room temperature.

If temperatures have changed dramatically, calibration and adjustment may be necessary.

• Do not exceed the scale’s maximum capacity. Overloading the scale can permanently

damage it!

• Store the scale in a clean, dry location. Dust, dirt, or moisture can accumulate in the

weighing sensors causing inaccuracies or malfunction.

• Avoid using the scale in close proximity to radio wave emitting devices such as computers,

cash registers, or cordless phones.

• Do not drop items onto the weighing platform. Gently apply all items to be weighed.

• Avoid dropping the scale. e warranty does not cover damage due to rough treatment

or overload.

• Do not disassemble the scale. is product contains no user serviceable parts.

• If you are having trouble with your scale, check the battery. is simple step can remedy

most scale issues.

• Only operate the scale on a stable, ﬂat surface.

4

Product Manual

Battery Installation

• Before using the scale for the ﬁrst time, check the battery compartment and remove any

plastic insulation strips or packaging that may be in place to prevent battery drainage

during shipping and storage.

• One 9V block battery is included. is should be placed into the battery compartment in

the manner indicated on the base plate.

Scale Operation

1. Remove any plastic insulation strips or packaging from the battery compartment.

2. Place scale on a ﬂat, level surface.

3. Turn the scale on with the ON/OFF key. All segments are shown on the display.

4. Wait until the zero appear. en place the object on the scale. e display will stabilize and

ﬂash 3 times. Your current weight will now be displayed.

Tare Weighing

1. You can use the tare feature to subtract the weight of an empty box or container for

net weight determination. (e weight of the container will subtract from the available

capacity.)

2. Turn on the scale as described above.

3. Place the “tare item” on the platform.

4. Press TARE key and wait until “0.0” is displayed.

5. Add the “net-weight item” the display now will show the net- weight of the contents.

6. To return to normal weight display (gross weight), remove any items from the weighing

platform and press the TARE key again to re-zero the scale.

5

Product Manual

Power Oﬀ

1. To turn the scale oﬀ, press the ON/OFF button.

2. e scale will automatically switch-oﬀ after 2 minutes whether weight is on the scales or

not, if no change of weight occurs in this time.

Changing Modes

1. e scale includes 4 diﬀerent weight units: kg, g, lb:oz, lb.

2. Press the MODE key to change the scale’s displayed unit of measure.

PCS Function

1. Turn on the scale and wait until the LCD displays “0.0”

2. Place the reference weight on the scale. Press and hold the PCS button until “100”

appears on the display. Press the MODE button to change the sample quantity (25, 50,

75, or 100), to match the reference weight.

3. Press the PCS button once again to conﬁm it.

4. You can now add products on the scale platform and the display will show the count.

5. Reference weight of the counting function will be saved even when turning the scale oﬀ.

It will not be deleted untill you save a new weight of counting.

Error Codes

1. Negative weight display - Press the TARE button again to re-zero the scale.

2. O.Ld – Maximum capacity exceeded. Remove the extra weight to avoid damaging the

load cell.

3. Lo- batteries are low, replace the batteries.

6

Product Manual

Troubleshooting

1. Problem: Scale will not turn on

Solution: Check the batteries.

2. Problem: Displayed weigh ﬂuctuates randomly

Solution: Make sure your work areas surface is stable and free of any air currents or

vibration.

Speciﬁcations

Capacity 200kg / 440lbs

Readability 50g / 5oz

Platform Size 10.6” x 10.6” x 0.5”

Modes kg / g / lb / lb:oz

Power 1 x 9V battery

Weight 4.6 lbs

is device corresponds to the requirements stipulated in 90/384/EEC. Note: Extreme

electromagnetic inﬂuences e.g. radio unit in the immediate vicinity may aﬀect the displayed

values. Once the interference has stopped, the product can once again be used normally.

is scales is not legal for trade.

Page is loading ...

23

Product Manual

Warranty

e Smart Weigh Scale is warrantied to the original owner for two years from the date of

purchase for defects in material and workmanship under normal use and service. If your

scale proves to be defective within one year of the purchase due to a manufacturer’s defect,

then follow the terms outlined below:

• Pack your scale carefully to avoid damages in transit. is warranty will not apply to

damages that occurred in the return transit.

• is warrantee will not cover any product that has been used for commercial purposes,

rental use, or use that is not intended for this scale.

• Smart Weigh will not be liable for any damages, losses, or inconveniences caused by user

negligence, abuse, or use that is not in accordance with this product manual.

• Smart Weigh is not responsible for any incidental or consequential damages of any

nature resulting from use of this product. Any liability shall not exceed the purchase price

of this product.

24

Product Manual

Smart Weigh Customer Support

Email: support@smartweighscales.com

Website: www.smartweighscales.com

Phone: 855.797.2253

Smart Weigh FBA_ACE200 User manual

Smart Weigh FBA_ACE200 User manual

in other languages

Related papers

Other documents