Metra Electronics 99-7335S User manual

Brand
Metra Electronics
Model
99-7335S
Category
Motor vehicle electronics
Type
User manual

Metra Electronics 99-7335S is a car stereo installation kit that allows you to replace your factory radio with an aftermarket unit. It is compatible with Hyundai Veracruz vehicles from 2007 to 2010 that have automatic climate control.

The kit includes a DIN radio provision with pocket, an ISO mount radio provision with pocket, a double DIN radio provision, and a stacked ISO mount units provision. It also comes with painted to match factory dash in silver.

To install the kit, you will need a small flat blade screwdriver or panel removal tool, and a Phillips screwdriver. The installation process is relatively simple and can be completed in a few hours. Once the kit is installed, you will be able to enjoy your new aftermarket stereo system.

Metra Electronics 99-7335S is a car stereo installation kit that allows you to replace your factory radio with an aftermarket unit. It is compatible with Hyundai Veracruz vehicles from 2007 to 2010 that have automatic climate control.

The kit includes a DIN radio provision with pocket, an ISO mount radio provision with pocket, a double DIN radio provision, and a stacked ISO mount units provision. It also comes with painted to match factory dash in silver.

To install the kit, you will need a small flat blade screwdriver or panel removal tool, and a Phillips screwdriver. The installation process is relatively simple and can be completed in a few hours. Once the kit is installed, you will be able to enjoy your new aftermarket stereo system.

INSTALLATION INSTRUCTIONS FOR PART 99-7335S
99-7335S
APPLICATIONS
HYUNDAI Veracruz
2007-2010
Automatic climate control only
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
•
Painted to match factory dash-”S”=Silver
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
E
F
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1004 - KIA/Hyundai harness 2004-up
• 70-7303 - KIA/Hyundai harness 2009
Antenna Adapter:
• 40-KI11 - KIA antenna adapter 2007-up
C
D
TOOLS REQUIRED:
Dash Disassembly
-
Hyundai Veracruz 2007-2010
(Automatic climate control only) .......................
. .1
Kit Assembly
- Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
- DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . .3
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 4
TABLE OF CONTENTS
99-7335S
Note:
Refer also to the instructions included with the aftermarket radio.
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills
by enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com
or call 800-354-6782 for more information
and take steps toward a better tomorrow.
1
4
HYUNDAI VERACRUZ 2007-2010
95-7335S DASH DISASSEMBLY
Disconnect the negative battery
terminal to prevent an accidental short
circuit.
1
Unclip and remove the side trim
panels. (Tip: start at the bottom of the
panels)
(Figure A)
Remove (4) Phillips screws securing
the climate control, (2) Phillips screws
securing the clock display and (4)
Phillips screws securing the pocket
from the radio trim panel.
(Figure C)
Continue to kit preparartion.
2
Remove (6) Phillips head screws
securing the radio trim panel and
remove trim panel.
(Figure B)
3
CLOCK DISPLAY-REAR VIEW
CLIMATE CONTROL-REAR VIEW
RADIO HOUSING
REAR VIEW
POCKET-REAR VIEW
C
B
A
2
99-7335S KIT ASSEMBLY
KIT PREPARATION
1
Attach the climate control, pocket and the clock display into the 99-7335S radio
housing using the factory hardware. (
Figure A)
Continue to kit assembly.
H
M
R
PUS
H
A/
C
TEM
P
PASSEN
GER
DUA
L
REA
R
REA
R
FRO
NT
MOD
E
OFF
AUT
O
A
MAN
UAL
TEMP
A
99-7335S KIT ASSEMBLY
3
A
B
C
DIN MOUNT RADIO PROVISION WITH POCKET
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down.
(Figure A)
2
Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3
Slide the aftermarket head unit into
the cage and secure.
(Figure C)
4
Reassemble dash in reverse order of
disassembly.
5
*
Note: Refer also to the instructions included with the aftermarket radio.
99-7335S KIT ASSEMBLY
4
A
B
C
ISO MOUNT RADIO PROVISION WITH POCKET
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
(Figure A)
2
Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3
Slide the head unit into the radio
opening until the side clips engage.
(Figure C)
4
Snap the Trim plate into the Radio
Housing.
(Figure C)
5
Reassemble dash in reverse order of
disassembly.
6
*
Note: Refer also to the instructions included with the aftermarket radio.
99-7335S KIT ASSEMBLY
DOUBLE DIN/STACKED ISO MOUNT
UNITS RADIO PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Cut and remove the center bar from
the radio housing.
(Figure A)
2
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate.
(Figure B)
3
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio.
(Figure C)
4
*
Note: Refer also to the instructions included with the aftermarket radio.
A
B
C
5
Reassemble dash in reverse order of
disassembly.
6
Snap the Double DIN trim plate into the
Radio Housing.
(Figure C)
5
99-7335S INSTRUCTIONS
1-800-221-0932
REV. 09/02/09 © COPYRIGHT 2009 METRA ELECTRONICS CORPORATION INST99-7335S
www.metraonline.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Metra Electronics 99-7335S User manual

Brand
Metra Electronics
Model
99-7335S
Category
Motor vehicle electronics
Type
User manual

Metra Electronics 99-7335S is a car stereo installation kit that allows you to replace your factory radio with an aftermarket unit. It is compatible with Hyundai Veracruz vehicles from 2007 to 2010 that have automatic climate control.

The kit includes a DIN radio provision with pocket, an ISO mount radio provision with pocket, a double DIN radio provision, and a stacked ISO mount units provision. It also comes with painted to match factory dash in silver.

To install the kit, you will need a small flat blade screwdriver or panel removal tool, and a Phillips screwdriver. The installation process is relatively simple and can be completed in a few hours. Once the kit is installed, you will be able to enjoy your new aftermarket stereo system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents