Life Fitness 64727 User manual

Hello! I am an AI chatbot trained to assist you with the Life Fitness 64727 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

905101 (805/874) BENCH SUPPORT KIT INSTRUCTIONS

RIGHT PAD SUPPORT

BACK PAD

_2,FT PAD SUPPORT

01/04/95

6,1.990

905101 (805/874) BENCH SUPPORT KIT INSTRUCTIONS

NOTE IF YOU ARE ASSEMBLING YOUR BENCH FOR THE FIRST TIME PLEASE DISREGARD THIS

STEP. Disassemble The BACK PAD from the SLIDE MOUNT and the HINGE TABS. Discard the two HINGE

TABS. (THE HARDWARE WILL BE USED AGAIN, DO NOT DISCARD)

Slide the LEFT AND RIGHT PAD SUPPORTS onto the PIN as shown on drawing.

Loosely assemble the BACK PAD to the bolt hole near the hinge of the LEFT and RIGHT PAD SUPPORTS

using two(2) 3/8 x I-1/4 IN. BOLTS, two (2) 3/8 IN. LOCK WASHERS, and two (2) 3/8 IN. WASHERS.

Loosely assemble the SLIDE MOUNT to the bolt holes near the end of the LEFT and RIGHT PAD SUPPORTS

using two(2) 3/8 x I-I/4 IN. BOLTS, two (2) 3/8 IN. LOCK WASHERS, and two (2) 3/8 IN. WASHERS.

SECURELY tighten all bolts. NOTE: If any other holes on your BACK PAD and PAD SUPPORTS match you

may install additional bolts if you wish.

01/04/95

64990