urban ambiance UQL2042 Installation guide

Brand
urban ambiance
Model
UQL2042
Type
Installation guide

urban ambiance UQL2042 is a decorative light fixture that can be used to add a touch of style to any room. It is easy to install and comes with all the necessary hardware. The fixture can accommodate four medium base decorative filament 60W bulbs, which are included. It can also accommodate four 23W CFL bulbs. The fixture is made of metal and glass and has a brushed nickel finish. It is 30.5 inches high and 20 inches wide. The fixture is perfect for use in a living room, dining room, or bedroom.

urban ambiance UQL2042 is a decorative light fixture that can be used to add a touch of style to any room. It is easy to install and comes with all the necessary hardware. The fixture can accommodate four medium base decorative filament 60W bulbs, which are included. It can also accommodate four 23W CFL bulbs. The fixture is made of metal and glass and has a brushed nickel finish. It is 30.5 inches high and 20 inches wide. The fixture is perfect for use in a living room, dining room, or bedroom.

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (4) Medium Base Decorative Filament 60W bulb (provided), Maximum 100W,Alternate bulb (4) 23W CFLMaximum.
Estimated Assembly Time: 30-45 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
1of2
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
C
Fixture
Body
x1
Package Contents
E
B
Lock
Screw
x2
Inner Backplate
x1
A
Shade
x4
DEdison Bulb
x4
F
Lock
Screw
x12
STEP 1 Install Inner Backplate and Fixture Body-
A. Pass the supply wires through Inner Backplate (A). Attach Inner
Backplate (A) to Outlet Box with the head of Green Ground Screw
facing you. Secure it with Outlet Box Screws (not included). Tighten
until snug
B. Race all supply wires through the Inner Backplate (A) as shown.
Refer to Step 2 for wiring connections.
C. Attach Fixture Body (C) over Inner Backplate (A) and secure with
Lock Screws (B). Tighten until snug with screwdrivers.
.
A
White wire
from supply White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
Figure 1
Outlet Box C
B
STEP 3 - Install Shades, Bulbs and
Bulb Shields
A. Place Shade (E) over the Cup, line
up the mounting hole on the Cup
and the hole on the Shade (E),
secure by threading the Lock
Screw (F) onto the mounting hole.
Hand tighten until sung.
B. This fixture uses Medium Base
Decorative Filament 60W bulb
(D), Maximum 100W. Insert bulb
and screw snugly into place.
Your fixture is now assembled and
ready to use. Enjoy!
Figure 3
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires between Inner Backplate (A) and Fixture Body (C).
Cup
C
E
F
D
Installation Instructions: UQL2042
www.urbanambiance.com
2of2
SKU: UQL2042
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
REPLACEMENT PART DESCRIPTION QTY.
NO.
1UQL2042SH GLASS SHADE 4
(4)Medium Base
Decorative
Filament 60W
bulbs (provided),
Maximum 100W.
7”
5”Dia.
30.5”
6”
8.75”
1
2IUQL2042BU VINTAGE BULB 4
2
www.urbanambiance.com
  • Page 1 1
  • Page 2 2

urban ambiance UQL2042 Installation guide

Brand
urban ambiance
Model
UQL2042
Type
Installation guide

urban ambiance UQL2042 is a decorative light fixture that can be used to add a touch of style to any room. It is easy to install and comes with all the necessary hardware. The fixture can accommodate four medium base decorative filament 60W bulbs, which are included. It can also accommodate four 23W CFL bulbs. The fixture is made of metal and glass and has a brushed nickel finish. It is 30.5 inches high and 20 inches wide. The fixture is perfect for use in a living room, dining room, or bedroom.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers