Ranger design 6107-19 Installation guide

Brand
Ranger design
Model
6107-19
Category
Wall & ceiling mounts accessories
Type
Installation guide

Ranger design 6107-19 is a window grill designed for Mercedes-Benz vehicles. It is constructed for the rear windows of Sprinter models produced in 2019 and onwards. The grill comes in a set of two, one for the driver side and one for the passenger side. The installation process is relatively straightforward and can be completed with basic tools such as a cordless drill, a 3/8" driver bit, and a knife. The grill is designed to provide an extra layer of security and protection for the vehicle's windows, while also enhancing its overall appearance.

Ranger design 6107-19 is a window grill designed for Mercedes-Benz vehicles. It is constructed for the rear windows of Sprinter models produced in 2019 and onwards. The grill comes in a set of two, one for the driver side and one for the passenger side. The installation process is relatively straightforward and can be completed with basic tools such as a cordless drill, a 3/8" driver bit, and a knife. The grill is designed to provide an extra layer of security and protection for the vehicle's windows, while also enhancing its overall appearance.

INSTALLATION GUIDE
6107-19 Window Grills
Mercedes - Benz ( Rear Window Grills )
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 2
QUICK START GUIDE
REQUIRED ITEMS
1
PERSONS
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
q Cordless Drill
q 3/8" Driver Bit
q Knife
q 2.1 Window Grill Installation.................................................................................................................. 4 - 6
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
Item No. Description Qty.
30-231 Driver Side Rear Window Grill Sprinter 2019+ 1
30-232 Passenger Side Rear Window Grill Sprinter 2019+ 1
96-6004 Customer Installation Fastener Kit 1
30-231
30-232
1.1.1 Unpack components; compare with the bill of materials.
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 4
Screw HWH
#14 × 3/4"
ZINC
# 92-100
16×16×
16×16×
PHASE 2 – INSTALLATION
2.1 WINDOW GRILL INSTALLATION
2.1.1 • Place driver side window grill on the driver side rear door.
• Pull the plastic cover o, then mark and trim the plactic cover.
#92-100 Screw 3/4"
96-6004 Fastener Kit Fastener Assembly
TOOLS
q Cutter
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 5
2.1.2 Place driver side window grill on the driver side rear door back, then screw the window grill on the door.
#92-100 Screw 3/4"
TOOLS
q Cordless Impact
q 3/8" Driver Bit
HARDWARE USEDHARDWARE USED
8×8×
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 6
2.1.2 Repeat the step 2.1.1 and 2.1.2 for the other window grill on the passenger side rear door.
#92-100 Screw 3/4"
TOOLS
q Cordless Impact
q 3/8" Driver Bit
HARDWARE USEDHARDWARE USED
8x8x
For technical support, contact us at 1-800-565-5321 6107-19 Installation Guide | REV. A1 | Page 7
“You have successfully installed your
6107 - 19 Window Grill
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: [email protected]om
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Ranger design 6107-19 Installation guide

Brand
Ranger design
Model
6107-19
Category
Wall & ceiling mounts accessories
Type
Installation guide

Ranger design 6107-19 is a window grill designed for Mercedes-Benz vehicles. It is constructed for the rear windows of Sprinter models produced in 2019 and onwards. The grill comes in a set of two, one for the driver side and one for the passenger side. The installation process is relatively straightforward and can be completed with basic tools such as a cordless drill, a 3/8" driver bit, and a knife. The grill is designed to provide an extra layer of security and protection for the vehicle's windows, while also enhancing its overall appearance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents