2. Thermo Fisher Scientific
  3. TRACE 1300 and TRACE 1310

Thermo Fisher Scientific TRACE 1300 and TRACE 1310 Quick start guide

  • Hello! I've reviewed the Quick Reference Card for the No Vent Microfluidics kit. This document outlines the included parts and provides instructions on how to access the installation video for TRACE 1300/TRACE 1310 GC systems. I understand the kit includes various components such as a module, mounting bracket, tubing, and connectors for a microfluidics setup. I'm here to answer any questions you have about the product.
  • What is included in the No Vent Microfluidics kit?
    Where can I find the installation instructions?
    How do I launch the installation video on a PC?
    How do I launch the video on a TRACE 1310 touchscreen?
© 2013 Thermo Fisher Scientific Inc.
All rights reserved.
The No Vent™ Microfluidics kit includes the following parts:
The USB stick contains the instructions on video and electronic printable format for installing the No Vent™
Microfluidics kit on your TRACE 1300/TRACE 1310 GC.
© 2013 Thermo Fisher Scientific Inc. All rights reserved. TRACE 1300 and TRACE 1310 are trademarks of
Thermo Fisher Scientific. SilFlow, SilTite, NoVent, and FingerTite are registered trademarks of SGE Analytical
Science. All other trademarks are the property of Thermo Fisher Scientific and its subsidiaries.
No Vent Microfluidics: Quick Reference Card
#
No Vent Microfluidics Module Mounting Bracket Pre-measured Deactivated Tubing
No Vent Microfluidics Tee SilTite™ FingerTite Nut SilTite FingerTite™ Pre-swage Tool
SilTite FingerTite Ferrule SilFlow™ Nut SilFlow FingerTite Pre-swage Tool
SilFlow Pre-swage Tool SilFlow Ferrule USB Stick
Launch Installation video tutorial to properly install
the No Vent Microfluidics Kit
To launch the video on the PC, insert the USB stick into an USB port on your computer, then select
No Vent installation.mp4.
To launch the video on the touchscreen of your TRACE 1310, insert the USB stick into the USB
port located at the bottom of the touchscreen. Select Maintenance | Video, then play No Vent
installation.wmf. The video display does not affect normal GC operation.
P/N 31717000 Revision A April 2013
/