Highwood AD-TBL-HI02-ACE Operating instructions

Highwood
Brand
Highwood
Model
AD-TBL-HI02-ACE
Type
Operating instructions

This manual is also suitable for

DETAIL 1
1
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
highwood
NATURE'S CLOSEST RIVAL
Hometown Picnic Table
Assembly Guide 1) Orient Table With Top Down. Attach Leg
To Table Top With Highwood Logo Facing
Outward Using Two "C" Bolts On Each Side.
2) Repeat for Other Leg.
TBL-HI02
09.06.2018
A
3) Attach Brace to Leg
Using Bolt "B".
x 8
4) Attach Brace to Table Top
Using Two "A" Bolts.
5) Repeat Steps 3 & 4 For
Remaining Three Braces.
B
1/4"-20 X 2"
1/4"-20 X 1.5"
x 12
C
1/4"-20 X 2.5"
x 8
LEG
HIGHWOOD LOGO TABLE TOP
C
LEG
B
BRACE
BRACE A
TABLE TOP
D
2" UMBRELLA GROMMET
x 1
DETAIL 10
10
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 2 OF 2
highwood
NATURE'S CLOSEST RIVAL
Hometown Picnic Table
Assembly Guide
TBL-HI02
09.06.2018
6) Tighten All Bolts.
7) With Help From Another Person,
Rotate Table Into The Upright Position.
8) With Table In Upright Position as Shown, Set Seat
In Between Legs.
9) Repeat On Other Side.
10) Attach Each Seat To Legs Using
Two "B" Bolts as Shown on Each Side of Seat.
11) Insert Umbrella Grommet "D" into Center Hole.
LEG
SEAT
LEG
B
D
  • Page 1 1
  • Page 2 2

Highwood AD-TBL-HI02-ACE Operating instructions

Highwood
Brand
Highwood
Model
AD-TBL-HI02-ACE
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers