Page is loading ...
30" Outdoor Warming Drawer
wolfappliance.com
FEATURES
• Stainless steel drawer fronts match
Wolf outdoor grills and professional
products.
• CSA approved for outdoor installations.
• UL approved for warming towels.
• Crafted of heavy-duty stainless steel.
• Hidden electronic touch controls for
sleek appearance.
• Temperature control range of 80°F to
200°F.
• Four preset temperatures—high 200°F,
medium 160°F, low 120°F and proof
85°F.
• Programmable automatic shut-off up to
four hours.
• Fan assist for even heat distribution.
• Fast preheat times.
• Rack for stacking food.
• Three ball-bearing drawer glides for
smooth, full extension.
• Removable stainless steel drawer for
easy cleaning.
MODEL
Warming Drawer* WWD30O
*Base unit only, accessory drawer front required.
ACCESSORIES
• Stainless steel 2" thick drawer front
for installation with Wolf outdoor grill.
• Stainless steel drawer front to match
Sub-Zero and Wolf professional
products.
• Stainless steel pro handle.
• Six-piece container set with lids
(shown below).
Accessories avail able through an authorized
Wolf dealer. For local dealer information, visit
the find a showroom section of our website,
wolfappliance.com.
Model WWD30O shown with stainless drawer front.
Accessory container set.
SPECIFICATIONS
PRODUCT
30" Front 29
7
/8"W x 10
3
/8"H x 22
3
/4"D
36" Front 35
7
/8"W x 10
3
/8"H x 22
3
/4"D
Weight 100 lb
INTERIOR
Capacity 1.6 cu ft
Dimensions 25"W x 6"H x 18"D
ELECTRICAL
Supply 120 VAC, 60 Hz
Service 15 amp circuit (GFCI)
Power Cord 3'
POWER RATING
Maximum 850 W
Specifications are subject to change without
notice. Visit wolfappliance.com/specs for the
most up-to-date information.
Dimensions may vary ±
1
/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.
30" Outdoor Warming Drawer
wolfappliance.com
DIMENSIONS
STANDARD INSTALLATION
©Wolf Appliance, Inc. all rights reserved. 10/2014
FLUSH INSET INSTALLATION
22
3
/4" (578)
28
1
/
4
"
(718)
9"
(229)
10
3
/8"
(264)
3
/
4
"
(19)
3
/4" (19)
A
B
W
WIDTH
21
1
/2"
(546)
OPEN DRAWER
FRONT VIEW
SIDE
VIEW
TOP VIEW
*Will be visible and should be finished to match cabinetry.
**Dimension provides minimum reveals.
NOTE: Dimensions provided allow for
1
/4" (6) reveal for proper air flow.
Location of electrical supply within opening may require additional cabinet depth.
24" (610)
FLUSH INSET
DEPTH
A
DRAWER
FRONT
DEPTH
10
5
/8"
(270)
FLUSH INSET
HEIGHT**
30
1
/8" (765)
FLUSH INSET WIDTH**
3
/4"(19)
3
/4"(19)
3
/4"(19)
E
E
FINISHED
CLEATS*
ANTI-TIP BLOCK
FRONT VIEW
SIDE
VIEW
TOP VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
23" (584)
OPENING
DEPTH
E
28
5
/8" (727)
OPENING WIDTH
9
1
/8" (232)
OPENING
HEIGHT
ANTI-TIP BLOCK
DRAWER FRONT
M / E SERIES A B
Professional 1
1
/8" 3
1
/2"
Professional (2" thick) 2
1
/8" 4
1
/2"
DRAWER FRONT DEPTH
M / E SERIES DRAWER FRONT A
Professional 1
1
/8"
Professional (2" thick) 2
1
/8"
Custom front panel depth is dependent on panel thickness.
29
7
/8" (759)
35
7
/8" (911)
/