Dometic eSYSTEM eCore 3kW, eCore 3kW Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dometic eSYSTEM eCore 3kW Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
eCore 3kW
3kW Main Controller for eSystem
Installation Manual. . . . . . . . . . . . . . . . . . . . 16
3kW Main Controller für eSystem
Montageanleitung. . . . . . . . . . . . . . . . . . . .64
3kW Main Controller pour eSystem
Instructions de montage . . . . . . . . . . . . . . 116
3kW Main Controller para eSystem
Instrucciones de montaje . . . . . . . . . . . . .169
Main Controller 3kW para o sistema
eSystem
Instruções de montagem . . . . . . . . . . . . .221
I3kW Main Controller per eSystem
Indicazioni di montaggio . . . . . . . . . . . . 276
EN
DE
FR
ES
PT
IT
CONTROL
eSYSTEM
eCore-3kW--I--WEST.book Seite 1 Donnerstag, 4. August 2016 11:53 11
eCore-3kW--I--WEST.book Seite 2 Donnerstag, 4. August 2016 11:53 11
eCore3kW
3
1 2 3 64 5
8 9 10
11
12
16
1514137
1
LINE ON
GENERATOR
STANDBY
SET
FAILURE
100%
75%
50%
25%
5%
CHARGER
INVERTER
Power
Sharing
AC
Load
Charge
Status
15 14 13 9 8 5 2
3
10
1
11
12
647
2
eCore-3kW--I--WEST.book Seite 3 Donnerstag, 4. August 2016 11:53 11
eCore3kW
4
3
LINE ON
GENERATOR
STANDBY
FAILURE
100%
75%
50%
25%
5%
INVERTER
CHARGER
AC
Load
SET
Charge
Status
339 35
148
2046
75
Ø40
4
eCore-3kW--I--WEST.book Seite 4 Donnerstag, 4. August 2016 11:53 11
eCore3kW
5
eCore Control
Logic
10 A
20 A
12 V
Output
AUX
D+
8
16
17 18
19
20
21
3
22
64
10
5
13
14
15
23
24
2
1
9
7
5
eCore-3kW--I--WEST.book Seite 5 Donnerstag, 4. August 2016 11:53 11
eCore3kW
6
1
6
1
6
GND (2)
Batt Temp Sensor (3)
6
1234
6587
7
432 61587
8
eCore-3kW--I--WEST.book Seite 6 Donnerstag, 4. August 2016 11:53 11
eCore3kW
7
Dometic
eCore
MANUAL MODE
GENERATOR
MODE
UPS MODE
SYSTEM
GENERATOR 0H
0.0KW 0RPM
ONLY CHARGER
15 s
INVERTER 30°C
230V 0.0A 0.0KW
AC IN - MAX20A
230V 0.0A 0.0KW
BATTERY 30°C
13.5V
> 1 s
AC OUT 00:00
230V 0.0A 0.0KW
System
Quick Setup
STANDBY
ACTIVE?
Standby
9
eCore-3kW--I--WEST.book Seite 7 Donnerstag, 4. August 2016 11:53 11
eCore3kW
8
GENERATOR 0H
0.0KW 0RPM
BATT SAVE-010:00
PAUSE?
INVERTER 30°C
230V 0.0A 0.0KW
AC IN - MAX20A
230V 0.0A 0.0KW
BATTERY 30°C
13.5V
Quick Setup
SYSTEM
System
AUTO MODE
Dometic
eCore
> 1 s
GEN AUTOSTART
ACTIVE?
15 s
15 s
> 1 s
STANDBY
ACTIVE?
Standby
AC OUT 00:00
230V 0.0A 0.0KW
0
eCore-3kW--I--WEST.book Seite 8 Donnerstag, 4. August 2016 11:53 11
eCore3kW
9
Quick Setup
DC BOOST
OFF?
> 1 s
MAX AC IN 6A
SETUP
MAX AC IN 6A
+ –
GEN AUTO
ACTIVE?
GENERATOR
ACTIVE?
MANUAL MODE
SETUP
WARNING BEEP
OFF?
MANUAL MODE
GENERATOR ON
MANUAL MODE
P. SHARING ON
MANUAL MODE
INVERTER ON
MANUAL MODE
LINE ON
MANUAL MODE
CHARGER ON
QUIET MODE
SETUP
START TIME 00:00
< > + –
QUIET MODE
SETUP
END TIME 00:00
< > + –
QUIET MODE
DISABLE?
> 1 s
YES NO
> 1 s
a
eCore-3kW--I--WEST.book Seite 9 Donnerstag, 4. August 2016 11:53 11
eCore3kW
10
SYSTEM
SETUP
SETUP
USER
SETUP
FACTORY
SYSTEM
INFO
SYSTEM
ALARM HIST.
System
System Info
System Setup
System Alarm
b
eCore-3kW--I--WEST.book Seite 10 Donnerstag, 4. August 2016 11:53 11
eCore3kW
11
System Setup
USER SETUP
DATE
DATE 00/00/00
< > + –
> 1 s
USER SETUP
SCREEN SAVE
SCREEN SAVE 1M
+ –
> 1 s
USER SETUP
RESET TO DEF.
CONFIRM RESET
> 1 s
USER SETUP
MAX AC
USER SETUP
QUIET SETUP
MAX AC IN 10.0A
+ –
> 1 s
USER SETUP
TIME
TIME 00:00
< > + –
> 1 s
START TIME 00:00
< > + –
QUIET MODE
SETUP
END TIME 00:00
< > + –
QUIET MODE
DISABLE?
> 1 s
YES
NO
> 1 s
c
eCore-3kW--I--WEST.book Seite 11 Donnerstag, 4. August 2016 11:53 11
eCore3kW
12
INFO
eCORE
INFO
ePOWER
INFO
eSTORE
INFO eSTORE
TOT CRG: 0000
INFO eSTORE
Connected: #1
INFO eSTORE #1
SN: 0000
IINFO eSTORE #1
HW: 0.00
INFO eSTORE
TOT DIS: 0000
INFO eSTORE #1
SW: 0.00
INFO eCORE
SN: 000000
INFO eCORE
HW P: 0.00
INFO eCORE
HW S: 0.00
INFO eCORE
FW S: 0.00
INFO eCORE
FW P: 0.00
INFO eCORE
WT_T: 0000H
INFO ePOWER
SN: 000000
INFO ePOWER
HW: 0.00
INFO ePOWER
SW: 0.00
INFO ePOWER
WT_T: 0000H
INFO ePOWER
WT_P: 0000H
System Info
d
System Alarm
ALARM LIST
eCore
ALARM eCore
C01R01 00H00M
ALARM LIST
eStore
ALARM eStore
C01R01 00H00M
ALARM LIST
ePower
ALARM ePower
C01R01 00H00M
ALARM eCore
C01R01 00H00M
ALARM eStore
C01R01 00H00M
ALARM ePower
C01R01 00H00M
e
eCore-3kW--I--WEST.book Seite 12 Donnerstag, 4. August 2016 11:53 11
eCore3kW
13
311
137
131
284
455
455
359
318
332
274
14
Ø8
R6
7760
f
eCore-3kW--I--WEST.book Seite 13 Donnerstag, 4. August 2016 11:53 11
eCore3kW
14
No action
eCORE running
in auto mode
*
NO
YES
YES
D+ on or
mains connected and
in tolerance?
eCore set
in auto mode?
NO
eCore in
standby?
eCore smart
wake-up off?
YES
NO
YES
NO
NO
Countdown stopped
by user?
eCore in smart
wake-up mode?
YES
NO
YES
NO
Countdown
finished?
Mains
connected or
DC Kit closed or
Generator on or
Output power
> 150 W?
Start/continue
countdown
Stop countdown
YES
NO
YES
eCORE running in
auto mode
eCORE running in
smart wake-up mode
eCore in standby
eCore in standby
Start
g
eCore-3kW--I--WEST.book Seite 14 Donnerstag, 4. August 2016 11:53 11
eCore3kW
15
*
Standby request
by user?
YES
YES
NO
AC
support off and
discharging
battery?
Smart wake-up
temporarily off
NO
Battery voltage >
min voltage ?
Gen Autostart
active ?
Mains connected?
NO
Countdown
finished?
Start/continue
countdown
Stop countdown
NO
YES
eCORE running in
smart wake-up mode
eCore in standby
NO
Countdown
finished?
Generator on or
DC Kit closed?
Start/continue
countdown
Stop countdown
Start generator
NO
YES NO
YES
NO YES
YES
eCORE in standby
eCORE running in
smart wake-up mode
Inverter stopped
h
eCore-3kW--I--WEST.book Seite 15 Donnerstag, 4. August 2016 11:53 11
EN
eCore3kW
16
Please read this instruction manual carefully before installation and first
use, and store it in a safe place. If you pass on the product to another
person, hand over this instruction manual along with it.
Table of contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3 Target group for this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
4 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7 Reference tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
8 Connecting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
9 Switching the device on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
11 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
12 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
13 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
eCore-3kW--I--WEST.book Seite 16 Donnerstag, 4. August 2016 11:53 11
EN
eCore3kW Explanation of symbols
17
1 Explanation of symbols
D
!
!
A
I
2 General safety instructions
The manufacturer accepts no liability for damage in the following cases:
Faulty assembly or connection
Damage to the product resulting from mechanical influences and excess voltage
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in the operating manual
2.1 General safety
D
DANGER!
Before you use the device for the first time, check that the operating
voltage matches the mains voltage (see type plate).
In the event of fire, use a fire extinguisher which is suitable for electrical
devices.
DANGER!
Safety instruction: Failure to observe this instruction will cause fatal or
serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
eCore-3kW--I--WEST.book Seite 17 Donnerstag, 4. August 2016 11:53 11
EN
General safety instructions eCore3kW
18
!
WARNING!
Do not use the device if the device itself or its connection cables are
visibly damaged.
This device may only be repaired by qualified personnel. Inadequate
repairs may cause serious hazards.
Should your device need to be repaired, please contact customer
services.
If a battery is connected, the device is live, even if the main switch is
turned off.
!
CAUTION!
If you disassemble the device:
Set the main switch to “0”.
Detach all connections.
Make sure that no voltage is present on any of the inputs and
outputs
A
NOTICE!
Check that the voltage specification on the type plate is the same as
that of the power supply.
Ensure that other objects cannot cause a short circuit on the contacts
of the device.
Ensure that the red and black terminals never come into contact.
Never pull the plug out of the socket by the connection cable.
2.2 Safety when installing the device
D
DANGER! Danger of electrocution
For installation on boats:
If electrical devices are incorrectly installed on boats, corrosion
damage might occur. Have the inverter installed by a specialist
(marine) electrician.
Do not touch exposed cables with your bare hands. This especially
applies to all cables in the AC mains circuit.
If you are working on electrical systems, ensure that there is somebody
close at hand who can help you in emergencies.
Never mount the device anywhere where there is a risk of gas or dust
explosion.
eCore-3kW--I--WEST.book Seite 18 Donnerstag, 4. August 2016 11:53 11
EN
eCore3kW General safety instructions
19
!
WARNING!
Only install the device in closed, well-ventilated rooms.
Never install the device in rooms where materials that are fire hazards
are stored, or where combustible gas is present; the surface
temperature can reach 60 °C.
Do not operate the device in systems with lead acid batteries. These
batteries give off explosive hydrogen gas that can be ignited by sparks
on electrical connections.
Before starting the device, ensure that the power supply lines are dry.
!
CAUTION!
Ensure that the device is standing firmly.
The device must be set up and fastened in such a way that it cannot tip
over or fall down.
Make sure that the device is earthed.
Make sure that the lead has a sufficient cross-section.
Lay the cables so that they cannot be tripped over or damaged.
Fasten the cables securely.
Do not expose the device to a heat source (such as direct sunlight or
heating). Avoid additional heating of the device in this way.
A
NOTICE!
If cables have to be fed through metal walls or other walls with sharp
edges, use ducts or bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12 V DC cable in the same
duct.
Set up the device in a dry location where it is protected against
splashing water.
Protect the device against corrosive fumes and salty or moist air.
Protect the device and the cable against rain and moisture.
Ensure good ventilation.
Only install the device indoors, never outside.
Do not connect the 230 V output of the inverter to a different 230 V
source.
eCore-3kW--I--WEST.book Seite 19 Donnerstag, 4. August 2016 11:53 11
EN
General safety instructions eCore3kW
20
2.3 Safety precautions when handling batteries
!
WARNING!
Batteries contain aggressive and caustic acids. Avoid battery fluid
coming into contact with your body. If your skin does come into
contact with battery fluid, wash the part of your body in question
thoroughly with water.
If you sustain any injuries from acids, contact a doctor immediately.
!
CAUTION!
When working on the batteries, do not wear any metal objects such as
watches or rings.
Lead acid batteries can cause short circuits which can cause serious
injuries.
Danger of explosions!
Never attempt to charge a frozen or defective battery.
Place the battery in a frost-free area and wait until the battery has accli-
matised to the ambient temperature. Then start the charging process.
Wear goggles and protective clothing when you work on batteries.
Do not touch your eyes when you are working on the battery.
Do not smoke and ensure that no sparks can arise in the vicinity of the
engine or battery.
A
NOTICE!
Only use rechargeable batteries.
Prevent any metal parts from falling on the battery. This can cause
sparks or short-circuit the battery and other electrical parts.
Make sure the polarity is correct when connecting the battery.
Follow the instructions of the battery manufacturer and those of the
manufacturer of the system or vehicle in which the battery is used.
If you need to remove the battery, first disconnect the earth
connection. Disconnect all connections and all consumers from the
battery before removing it.
eCore-3kW--I--WEST.book Seite 20 Donnerstag, 4. August 2016 11:53 11
/