Vehicle DVR Camera
& Monitor Video Recording Kit
Rear View / Backup Camera Systems
with 7" -inch Display Monitor
(with Quad View, 4-Cam Video Support)
www.PyleUSA.com
1
www.PyleUSA.com
2
NOTICE
For your safety, please do not watch videos on the monitor
when driving. Except professional repair-men, do not modify
the machine. lf the machine doesn‘t work, please consult
customer services or send the machine to local maintenance
departments.
WARNING: Please install this machine in the place where laws
and regulations allows it, our company take no responsibility for
illegal product installation.
ATTENTION:
The machine may appear darkscreen phenomenon when
starting up in the cold days, after power on and machine's
temperature gradually rises up, the display screen would
gradually return to normal.
SYSTEM FEATURES:
● Multi-Camera & Monitor Video System Kit
● 7’’ -inch LCD Monitor Display Screen
● DVR Video Recording via SD Memory Card Slot
● Quad View Camera Selectable:
Choose Your Camera, View it On-Screen
● Compatible with Up to 4-Camera Video Input Support
● Universal Exterior Mount Rearview Backup Cameras
● Marine Grade Waterproof Rated Cams
● Night Vision Illumination
● Angle Adjustable Camera Lens
● Rugged & Heavy-Duty Construction
● Perfect for Large Production Vehicles
DVR VIDEO RECORDING:
● DVR Recording: 4-Channel Video Signal
● VGA Resolution 720 x 480, PAL
● Recording speed: 50FPS (NTSC, 60FPS)
● Storage format: AVI
ROUND CAMERA:
● Video System: PAL/NTSC Auto Switching
● Image Sensor: 1/4'' Color CMD
● LED Light: 12 IR LED Lights
● Eective Pixel: 580 x 540 Pixels
● Lens Angle: 170° Degree
● Marine Grade Rating: IP-69
● Camera Dimensions (W x H x D): 3.2'' x 3.2'' x 2.2'' inches
● Weight: 0.72 lbs.
SQUARE CAMERA:
● Video System: PAL/NTSC Auto Switching
● Image Sensor: 1/4'' Color CMD
● LED Light: 18 IR LED Lights
● Eective Pixel: 580 x 540 Pixels
● Lens Angle: 170° Degree
● Marine Grade Rating: IP-69
● Camera Dimensions (W x H x D): 3.2'' x 3.2'' x 2.2'' inches
● Weight: 0.94 lbs.
TECHNICAL SPECS:
● LCD Screen: 7’’ -inch 16:9 Image
● Micro SD Card Support: Up to 32 GB *Not Included
● OSD Control: Color, Brightness, Contrast, Volume, Language
● Power Cord Length: 4-Pin Cable 49.2’ ft.
● Brightness: 350-400cd/m2
● Aspect Ratio: 16:9
● Power Supply: DC 12-24V
● Monitor Dimensions (L x W x H ): 7.08’’ x 4.76’’ x 1.02’’ inches
APPLICATION
This product adopts digital TFT color LCD of high denition
real-time monitoring, stored in SD card; built-in DVR recording
function with one single image or quad split images; supports
1way AV recording; built-in speaker and with remote control.
The installation is convenient and the connection is simple.
www.PyleUSA.com
3
www.PyleUSA.com
4
With no radiation, low comsumption, beautiful and vivid image,
small size etc features, widely applied in universal car security
and monitor.
1. Labelling Mark
2. MENU: Compound key in the settings menu, four split & DVR mode.
3. CH 1: Direct channel CH 1 mode in split mode.
In four split state its the menu minus. Menu up in DVR state, its the
last page in the DVR video playback state is used to select videos.
4. CH 2: Direct channel CH 2 mode in split mode. Menu plus in four split
state. Drop down menu in DVR State. The next page in DVR video
playback state, used to select videos.
5. POWER: Monitor standby/switch ON
6. CH3: It is the direct channel 3 mode in split mode, it is the down in
the four split status menu, left in the DVR status menu, CH3 is the
play button in DVR video.
7. CH4: It is the direct channel 4 mode in split mode, UP in the four split
status menu, right in DVR status status menu, and in DVR videos CH4
indicates “pause”.
8. MODE: In four split screen, it is the cyclic switching of the mode 2
division, -3 segmentation, -4 segmentation. In DVR state, MODE is
used to switch playback/video mode.
9. Remote Control window.
BUTTON FUNCTION
1. Labelling Mark
2. POWER: Compound key long press indicates that the monitor is
standby/switched on. Short press indicates four split/DVR screen
switching
3. MODE: Compound key short press indicates the loop switch of the
split mode 2-split 3-split4/ln the DVR state. MODE can switch to
playback/video mode. Long press represents the conversion of the
four division and the DVR mode
4. CH1: It is the direct channel CH1 mode in split mode/In the four split
state, it is menu minus/the menu up in the DVR state/ the last page
in DVR video playback state, used to select videos.
5. CH2: The direct channel CH2 mode in split mode/It is menu plus in
the four split state/It is the menu down in the DVR state/ It is the
next page in the DVR video playback state, used to select videos.
6. Ch3: The direct channel 3 mode in split mode/down in the four split
status menu/left in DVR status menu/in DVR video, CH3 is the play
button
7. Ch4: Direct channel 4 mode in split mode/It is up in the four split
status menu/It is right in the DVR status menul In DVR videos. CH4
indicates pauses
www.PyleUSA.com
5
www.PyleUSA.com
6
REMOTE CONTROL
REC/ENTER: In DVR mode, video start (stop) / conrm function
RIGHT: Right direction
MENU: Screen display settings menu
DOWN: Down direction
MODE: Four split compound split mode switching. Cyclic switching of 2
segmentation, 3 segmentation, 4 segmentation
CH1: In the four split mode, use to switch directly to single channel 1
VOL+: Volume increase. No power mode. No support
CH2: In the four split mode, use to switch directly to single channel 2
CH3: In the four split mode, use to switch directly to single channel 3
VOL-: Volume reduction. No power mode. No support
CH4: In the four split mode, use to switch directly to single channel 4
INSTRUCTION MANUAL
How to set DVR video time
In DVR mode, enter the DVR settings menu via remote control SETUP
or panel MENU, and then click it again to enter the SETUP Options box
as follows:
Press up and down to enter the INPUT item remote control.
REC/ENTER to enter date setting. Remote control 'REC/ENTER' or panel.
press CH3 to enter time setting. Change the time page up and down:
How to operate DVR video
In DVR mode, remote control MODE1 or long press the keypad MODE
to switch to burn mode, while the lower left corner of the white time
display as shown
POWER: Standby/boot. through this button.
you can achiev standby mode or
boot mode
DVR/AV: Toggle the DVR mode and the four
split mode
MODE1: In DVR mode. it is used for loop
switching of video/playback
SETUP: In DVR mode. you can open the DVR
settings menu
UP: Up direction
MUTE: Mute switch. No power amplifier. no
support
LEFT: Left direction
www.PyleUSA.com
7
www.PyleUSA.com
8
And then remote control REC / ENTER or monitor panel long press CH3
for recording mode. The image began to burn, the upper left corner of
the red dot will ash as shown:
How to view DVR burn videos
In the DVR mode, remote control MODE1 or press the panel MODE to
switch to view the recording mode, the upper left corner ofthe display
has a black folder icon and the current video track display. You can
press CH1/CH2 up and down button to select dierent video le.
In the lower left corner; OK, play, pause icon and time displays, and
then remote control REC / ENTER or panel press CH3 to conrm the
video playback:
CONNECTION
ACCESSORY
INSTALLATION EXAMPLES
Monitor system used in truck, bus, express car, or special vehicle
www.PyleUSA.com
9
www.PyleUSA.com
10
MONITOR STANDARD INSTALLATION
1. Remove the screw around then take out the monitor.
Put U type bracket to the right place and adjust. Prepare 3 screws.
(see below pictures)
2. Lock the bracket by screws. Put the monitor into the bracket.
Adjust angle and locking it. (see below pictures)
3. Finish the installation. The adjustable angle is forwad 30° and
backward 30°. User can adjust its preferred angle. (see below pic.)
/
