01
0090506952C
Please read this manual carefully
before operating the unit, and keep
it for future reference.
TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
This User's Manual is applicable for the following models:
L26A9A, L32A9A, L32A1A, L37A9A-AK
1
CONTENTS
2
WARNING AND CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING. OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
CAUTION
DO NOT OPENDO NOT OPEN
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
!!
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
Warning and caution...........................................................................................2
Buttons and interface position............................................................................5
Front control panel.........................................................................................5
Back interface.................................................................................................6
Side
Preparation for remote control..........................................................................7
Remote control panel..........................................................................................8
Basic operation.................................................................................................9
Power on/off TV............................................................................................9
TV program selection and volume adjustment..............................................9
Recall............................................................................................................9
Mute function................................................................................................9
OSD language selection.................................................................................9
Screen display...................................................................................................10
TV program setting..........................................................................................11
Auto search...................................................................................................11
Manual search...............................................................................................11
Fine tune.......................................................................................................12
Skip...............................................................................................................12
Exchange.......................................................................................................13
Image control....................................................................................................13
Set your favourite picture mode....................................................................13
Noise reduce..................................................................................................13
Picture mode /sound mode selection.............................................................14
Sound control...................................................................................................14
Sound effect control......................................................................................14
System setting function....................................................................................14
OSD background setting...............................................................................14
Signal source setting......................................................................................15
Screen display picture zoom setting..............................................................15
Other setting function.......................................................................................15
Sleep timer setting.........................................................................................15
PIP setting......................................................................................................16
Sound source setting......................................................................................16
Color temperature..........................................................................................17
Digital filter setting........................................................................................17
AAA setting...................................................................................................17
H-POSITION/ V-POSITON/DURATION.........................................................18
Color and time on/of setting.........................................................................18
CHILD LOCK...............................................................................................19
Steram Media Broadcast System.................................................................20
External audio and video equipment connection..............................................28
Specifications...................................................................................................32
Trouble shooting guide.......................................................................................33
interface..................................................................................................6
WARNING AND CAUTION
Please ensure that the set has adequate
ventilation.
Do not put the unit near water or oil as it
may cause a fire.
During thunderstorms, unplug both the
antenna and power plug to prevent
damage.
Do not use a damaged power plug or put
the power supply wire near a heat source
as it may cause electric shock or fire.
To prevent potential fire, do not overload
an electrical outlet with too many plugs.
Place the set on a level surface to
prevent it from tipping and potential
damage.
Do not remove the cover of the set
or try to service. This may result in
electric shock or fire. All service
work must be completed by an
authorized technician.
Do not place the power adapter near
a heat source or it may cause a fire.
If there are any abnormal sounds or
smells from the unit, unplug
immediately and contact an authorized
service provider.
3
WARNING AND CAUTION
4
To prevent fire, do not use or store any
flammable materials near the unit.
To prevent fire, do not place the unit near
a damp wall.
To prevent electric shock, ensure that
any external antenna connected to the set
is clear of contact with any power lines.
Do not plug / unplug the unit while your
hands are wet. This may cause an electric
shock.
Please ensure a solid connection with
the AC wall socket in order to avoid
shock and potential fire.
To prevent electric shock or fire, please
note to prevent rain from entering the set
along the wire connected to the outside
antenna.
When cleaning, please unplug the unit.
Use a soft cotton cloth. Do not use any
abrasive cleansers, and prevent water
from entering the set.
If any plugs or input wires are dirty, unplug
the set and clean. This will prevent risk of
electric shock or fire.
If the set is not going to be used for an
extended period, unplug the unit from
the AC wall outlet.
Do not place the set near a heat source or
in direct sunlight.
BUTTONS AND INTERFACE POSITION
5
Front control panel
6
1.
2.
3.
4.
5.
6.
7.
Menu button
TV/AV switch button
Program down/up button/item down/up selected
Volume down/up button/item left/right selected and enter
Power button
Power indicator
Remote sensor
1
MENU
P-
P+
TV/AV
V-
V+
POWER
2
3
4
5
MENU TV/AV
P- P+ V- V+
POWER
1 2 3 4 5 67
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
Back panel
L37A9A-AK
Side panel
USB1
USB2
USB1 jack
USB2 jack
VGA
VGA
AUDIO IN
Y Pb/Cb Pr/Cr
YPb/CbPr/Cr L-IN R-IN
V-OUT L-OUT R-OUT
S-
VIDEO
AV2 L R
AV1 L R
ANT
POWER
L26A9A-A/L32A9A-A/L32A1A-A
HDMI IN
1 VGA input
2 VGA audio input
3 Component video input
4 VIDEO/AUDIO output
5 Component/S-VIDEO audio input
6 S-VIDEO input
7 VIDEO/AUDIO input1
8 VIDEO/AUDEO input2
9 Antenna input
10 Power cord socket
11 Power switch Please according to the real set
12 HDMIVIDEO and AUDIO input
BUTTONS AND INTERFACE POSITION
7
PREPARATION FOR REMOTE CONTROL
3
2
1
++
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use the rechargeable batteries.
9
REMOTE CONTROL PANEL
Power button
Mute button
TV/AV switch button
Display button
Dynamic AAA HDTV on/off button
PIP function on/off button
PIP main/sub picture switch button
PIP sound selection button
Digital selection button
Program recall button
Child lock button
Picture mode selection button
Sound mode selection button
Program up/down button, direction
selection button
Volume up/down button, direction
selection button
Menu call/exit button
Color system selection button
Sound system selection button
Program scan button
Picture still button
Picture size selection button
Sleep timer button
This function is not available
This function is not available
main/sub
Buttons and Descriptions
8
BASIC OPERATION
1. If the TV set is in standby status, press power
switch on the remote control or TV set (or CH+/-/P+/-
on the remote control)can cancel the standby status,
then enter the power on status.
2. Press power switch on the remote control or
the TV set again, the TV set will enter standby
status.
Standby set: first connect the power supply wire,
then turn the power switch on the back of TV set on(if
there is a power switch button).
TV PROGRAM SELECTION AND VOLUME
ADJUSTMENT
You can use CH+/- button or direct-digit choosing
button to select the TV channel number.
Press VOL+/- button to adjust the volume.
RECALL
Pressing RECALL button can switch the channel to the
last channel you watched.
MUTE FUNCTION
1. Press MUTE button to shut off the TV sound, the
screen displays mute mark.
2. Press MUTE button again or VOL+ button to restore
the sound.
OSD LANGUAGE SELECTION
Select the LANGUAGE item in the menu
1. Press MENU and CH+/- button to select OSD setting
menu.
2. Press VOL+/- to enter and CH+/- button to select
LANGUAGE item.
3. Press VOL+/- button to select the language you need.
OSD
MOVE SELECT MENU EXIT
MUTE
TV/AV
SOUND
POWER
MAIN/SUB
PIP
AAA
DISPLAY
POWER ON/OFF TV
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
S.STD
CHILDLOCK
RECALL
CH+
P.STD
C.SYS
S.SYS
MENU
CH-
VOL-
VOL+
ZOOM
BACK
SIZE
STILL
=
SLEEP
SCAN
SOUND
MAIN/SUB
PIP
DISPLAY
TV/AV
AAA
MUTE
POWER
I-II
17/18/19/20/21/24/26/27/29/30 buttons
are for the multi-media ,reference to
the instruction following.
The USB multi-media is only for the
model L37A9A-AK.
10
11
SCREEN DISPLAY
For your convenient operation and in order to know the TV set, we offer the below
menus.
Picture setting menu
Sound setting menu
Menu setting menu
Function setting menu
Source setting menu
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
PICTURE
MOVE SELECT MENU EXIT
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
SOURCE
MOVE SELECT MENU EXIT
MOVE SELECT MENU EXIT
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
OSD
MOVE SELECT MENU EXIT
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
Operation instructions
The real display may be different from the above menus, if you need adjust, please do as
follows:
1.Press MENU button to open the menu, use CH+/- button to select every menu
separately, use VOL+/- button to enter.
2.Press CH+/- button to select the item needs adjust.
3.Press VOL+/- button to adjust the selected item, or enter the next menu.
4.Press MENU button to return the last menu or exit the screen menu display.
Note: Press MENU button to select the menu operation in the user manual, please
refer to these operation instructions.
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
SOURCE
MOVE SELECT MENU EXIT
AUTO SEARCH
Using AUTO SEARCH can search all receiving
programs. We recommend using auto search to
search the program when you use this TV set for
the first time.
1.Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
2.Press CH+/- button to select AUTO SEARCH.
3.Press VOL+/- button to start searching, press MENU
button to finish auto search.
Note: The order of the auto search is due to the
frequency of the program, generally speaking,
it is used only at the first time you search the
program, and once the order of the program has
been confirmed, you do nott have to use this
function, otherwise the order of the program
will be changed.
MANUAL SEARCH
Manual search can search and order the program freely.
1. Press MENU and CH+/- button to select the SOURCE
menu and VOL+/- to enter.
2. Press CH+/- button to select MANUAL SEARCH,
press VOL+/- button to enter the next menu.
3. Press CH+/- button to select SEARCH NEXT.
4. Press VOL+/- button to start searching, pressing
VOL+ button is used to search the higher frequency
channel, pressing VOL- button is used to search the
lower frequency channel, when you have searched
a program, the searching will stop automatically.
You can press VOL+/- button to go on searching or
press MENU button to exit.
Note: During searching, it may appear black screen
because of change of signal, it is normal, it will
recover after finishing searching.
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SOURCE
MOVE SELECT MENU EXIT
TV PROGRAM SETTING
12
13
SKIP
TV PROGRAM SETTING
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SOURCE
MOVE SELECT MENU EXIT
When you can not get a satisfactory picture effect,
you can fine tune to obtain.
1. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
2. Press CH+/- button to select MANUAL
SEARCH, press VOL+/- button to enter the next
menu.
3. Press CH+/- button to select FINE TUNE.
4. Press VOL+/- button to start fine tune until you
obtain the best picture and sound, then loose
the button, press MENU button to exit.
1. Select the program number you need skip.
2. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
3. Press CH+/- button to select the MANUAL
SEARCH, press VOL+/- button to enter the
next menu.
4. Press CH+/- button to select SKIP, press
VOL+/- button to select ON.
5. Press MENU button to shut off the menu.
When you use CH+/- button to select channel,
this channel number will be skipped. But you
can still use one direct-digit choosing button to
select the skipped channel number.
Note: How to recover the skipped channel number
1. Press direct-digit choosing button to select the
channel number that needs recover.
2. Repeat the steps above.
3. Press CH+/- button to select SKIP, press VOL+/-
button to select OFF.
FINE TUNE
CURRENT CHANNEL 15
SKIP OFF
TARGET CHANNEL 28
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SOURCE
MOVE SELECT MENU EXIT
1. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
2. Press CH+/- button to select MANUAL
SEARCH, press VOL+/- button to enter the next
menu.
3. Press CH+/- button to select TARGET CHANNEL,
press VOL+/- button to select the channel you need
exchange.
4. Press CH+/- button to select EXCHANGE, press
VOL+/- button to exchange, as figure, exchange
the current channel number 15 to channel number
28.
5. Press MENU button to save and exit.
SET YOUR FAVOURITE PICTURE MODE
1. Press MENU and CH+/- button to select PICTURE
menu and VOL+/- to enter.
2. Press CH+/- button to select the item that needs
adjust.
3. Press VOL+/- button to adjust the selected item,
the detailed adjustment is as following table.
The table of picture item adjustment effect
*
Items
VOL- VOL+
Contrast
Brightness
Saturation
Tint
Sharpness
Weak
Strong
Dark
Bright
Light
Thick
Green
Red
Soft Sharp
Note: TINT is only valid in NTSC system.
NOISE REDUCE
Noise reduce can decrease the noise of picture
1. Press MENU and CH+/- button to select PICTURE
menu and VOL+/- to enter.
2. Press CH+/- button to select the NOISE REDUCE.
3. Press VOL+/- button to select OFF, WEAK or
STRONG as your require.
EXCHANGE
TV PROGRAM SETTING
IMAGE CONTROL
SET YOUR FAVOURITE PICTURE MODE
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
PICTURE
MOVE SELECT MENU EXIT
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SOURCE
MOVE SELECT MENU EXIT
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SOURCE
MOVE SELECT MENU EXIT
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
PICTURE
MOVE SELECT MENU EXIT
14
15
MOVE SELECT MENU EXIT
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
PICTURE MODE/SOUND MODE SELECTION
0
0
TRANSPARENCY
63
50
75 100 300 1K 3K 5K 10K 15K
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
OSD
MOVE SELECT MENU EXIT
MOVE
SELECT MENU EXIT
MOVE
SELECT MENU EXIT
Press P.STD button on the remote control
continually, the following four picture modes
can be selected in turn.
NATURAL: common mode.
SOFT: the image effect is soft.
USER: set the image effect you like.
BRIGHT: suitable for sport image.
NATURAL
BRIGHT PERSONAL SOFT
Press S.STD button on the remote control
continually, the following four sound modes
can be selected in turn.
You can also enter picture and sound menu to adjust.
NORMAL
MUSIC PERSONAL
NEWS
You can select your favourite sound modes, and adjust
the BALANCE and EQUALIZER of sound.
1. Press MENU and CH+/- button to select SOUND menu.
2. Press VOL+/- to enter and CH+/- button to select the
sound item you need set.
3. Press VOL+/- button to adjust the selected item.
BALANCE: Press VOL+/- button to enter adjustment,
use VOL+/- button to adjust the balance of left and
right sound.
EQUALIZER: Press VOL+/- button to enter EQUALIZER
set menu, use VOL+/- button to select every different
frequency, use CH+/- button to adjust.
The higher of the transparency set value is,
the higher of the OSD transparency is, whereas,
the transparency is lower.
1. Press MENU and CH+/- button to select OSD setting menu.
2. Press VOL+/- to enter and CH+/- button to select the
TRANSPARENCY item.
3. Press VOL+/- button to set the transparency value.
Note: Sound source only can be adjusted in PIP mode.
SYSTEM SETTING FUNCTION
CHILD LOCK
P.STD
CHILD LOCK
P.STD
RECALL
S.STD
RECALL
S.STD
IMAGE CONTROL
SOUND CONTROL
OSD BACKGROUND SETTING
SOUND EFFECT CONTROL
SYSTEM SETTING FUNCTION
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTE
AUTO SEARCH
MANUAL SEARCH
BG
SOURCE
MOVE SELECT MENU EXIT
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
There is different signal source mode in this TV set,
you can select according to your require: TV,
AV1, AV2, S-VIDEO, USB, YPBPR, VGA, HDMI.
1. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
2. Press CH+/- button to select PICTURE SOURCE.
3. Press VOL+/- button to select the signal source
mode you need.
4. You can press TV/AV button on the remote
control to select directly.
SCREEN DISPLAY PICTURE ZOOM SETTING
There is different screen display picture zoom,
you can select according to your require: FULL,
ZOOM1, ZOOM2, NORMAL.
1.Press MENU and CH+/- button to select PICTURE
menu and VOL+/- to enter.
2.Press CH+/- button to select SIZE MODE.
3.Press VOL+/- button to select the zoom you need.
4.You can press ZOOM button on the remote
control to switch.
OTHER SETTING FUNCTION
After you set the sleep timer, the TV set will count
from the setting time, when the count time is coming,
the TV set will turn off automatically.
Press SLEEP button to enter off time set, you can
select the certain time: OFF, SLEEP 15(Min), SLEEP
30(Min), SLEEP 60(Min)...SLEEP 240(Min), after
setting, the TV set will start counting.
Note: if you want to see the off time you set, press
SLEEP button. If you want to cancel the sleep time
set, follow the above procedures, set the time OFF.
You could also set the sleep time in function menu.
SIGNAL SOURCE SETTING
SLEEP TIMER SETTING
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
PICTURE
MOVE SELECT MENU EXIT
SOUND
Note:USB mode is only available
in model L37A9A-AK
16
17
PIP SETTING
This TV set support PIP function, it can display
picture of two sources at the same time.
1.Press MENU and CH+/- button to select source menu.
2.Select PIP mode, use VOL+/- button to select
P1S1, P1S2, P2S1, P2S2, P3S1, P3S2, P4S1,
P4S2 or OFF mode, open PIP function.
3.Select PICTURE SOURCE, use VOL+/-
button to change the input source of main picture,
such as TV, AV1, AV2 and so on.
4.Select SUB PICTURE source, use VOL+/- button to
change the input source of sub picture, such as
VGA, YPBPR and so on.
Note:
1. After switching the main picture source, it will
shut off the PIP function, if need, you can open
this function again.
2. The following two suit
can use PIP function,
the same suit source
can not use PIP
function, source1
and source2 can switch.
3.You can press PIP button on the remote control
to turn on or turn off the PIP function.
4.You can press MAIN/SUB button on the remote
control to switch the main picture and sub picture.
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
SOURCE
MOVE SELECT MENU EXIT
SOURCE1
SOURCE2
TV, AV1, AV2, S-VIDEO, USB
VGA, , HDMIYPBPR
SOUND SOURCE SETTING
After the PIP function is open, this item is activated,
you can select the main picture sound or sub picture
sound of current broadcasting sound.
1.Press MENU and CH+/- button to select SOUND
menu and VOL+/- to enter.
2.Press CH+/- button to select SOUND SOURCE.
3.Press VOL+/- button to change the current sound to
main picture sound or sub picture sound.
Note:
1.You can also press SOUND button on the remote
control to switch the main picture sound or sub
picture sound.
2.After switching the sound to sub picture sound, you
can switch the source in sub picture.
OTHER SETTING FUNCTION
MOVE SELECT MENU EXIT
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
1.Press MENU and CH+/- button to select FUNCTION
menu and VOL+/- to enter.
2.Press CH+/- button to select COLOR TEMP.
3.Press VOL+/- button to select DEFAULT 6500K
7300K 8500K 9300K USER
Note: PERSONAL is the color temperature of picture
you set through D FILTER.
DIGITAL FILTER SETTING
Use D FILTER can adjust the color temperature
exactly.
1.Press MENU and CH+/- button to select FUNCTION
menu and VOL+/- to enter.
2.Press CH+/- button to select D FILTER.
3.Press VOL+/- button to select the COLOR TEMP,
use CH+/- button to adjust.
AAA SETTING
AAA function can improve the quality of picture and
make the picture best.
1.Press MENU and CH+/- button to select FUNCTION
menu and VOL+/- to enter.
2.Press CH+/- button to select AAA.
3.Press VOL+/- button to select ON, OFF, DEMO or
SPLIT.
4.Press AAA button on the remote control to start
and select AAA mode.
DEMO: Use one moved sub picture in the picture to
start AAA function.
SPLIT: Separate the picture from left and right, start
AAA function in left picture.
Note:
.
It can not use the AAA function with
no signal and in YPBPR/VGA/PIP mode
COLOR TEMPERATURE
OTHER SETTING FUNCTION
Note: USB source is only
available in model L37A9A-AK
OTHER SETTING FUNCTION
H-POSITION/V-POSITION/DURATION
1 Press MENU and CH+/- to select OSD and
VOL+/- to enter .
2 Press CH+/- to select H-POSITION(V-POSITION/
DURATION).
3 Press VOL+/- to adjust.
Clock and time on/off setting
Using on/off timer function , the TV set can automatically
turn on to a program or shut down at a preset time.
Time on/off function
You should check if the display time fo the set is
the same with the standard time of your place, if not,
you could adjust it as following.
Clock setting
2 Press CH+/- to select CLOCK and VOL+/- to enter
after pressing VOL+/- to select the position you want
to adjust, press VOL+/- to adjust.
1 Press MENU and CH+/- to select FUNTION menu
and VOL+/- to enter.
3 After time setting, press MENU to exit
Clock time is the standard of other time
3 Repeat steps1and 2 to set TIME OFF.
2 Press CH+/- to select TIME ON and VOL+/-
to enter, after pressing VOL+/- to select
the position you want to adjust press CH+/-
to set.
1 Press MENU and CH+/- to select FUNCTION menu
and VOL+/- to enter.
OTHER SETTING FUNCTION
Press CHILDLOCK button, password will appear
on the screen.Input 6666 (the initial password of the
television )to enter the menu .
1.Press CH+/- to select the first item and VOL+/-
to select the source and CHILDLOCK to turn on/off
the selected source.
2.Press CH+/- to select TV CHANNEL and CH+/-
to select position, then VOL+/- to change the
channel number(0-255), press CHILDLOCK to
turn on/off the selected channel.
3.Press CH+/- to select TV SEARCH and VOL+/-
or CHILDLOCK to turn on/off the function.
4.Press CH+/- to select VOLUME LOCK and
VOL+/- to set the max volume(10-100)
5.Press CH+/- to select PW.CHANNEL and
to set the channel number , then the TV can turn
on to the channel you have set.
6.Press CH+/- to select CLEAR ALL and VOL+/-
to unlock all the lock you have set.
7.
8.Default of BUS is ON, can not be adjusted
VOL+/-
Press CH+/- to select CHANGE PASSWORD and
VOL+/- to enter the menu, input the new password
and confirm password to change the password.
AV1
TV CHANNEL 000
PW.CHANNEL
BUS
ON
20
VOLUME LOCK
100
CHANGE PASSWORD
CLEAR ALL
TV SEARCH
UNLOCK
UNLOCK
UNLOCK
PLEASE INPUT PASSWORD
* * * *
CONFIRM * * * *
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
OSD
MOVE SELECT MENU EXIT
Note: H-POSITION and V-POSITION are used to adjust
horizontal and vertical position, DURATION is used to adjust
the time of the menu display.
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
PLEASE INPUT PASSWORD
* * * *
PLEASE INPUT PASSWORD
* * * *
18
19
CHILD LOCK
Stream media play prepare
1. Supporting equipment
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 and digital camera.
2.Equipment supporting PTP
agreement includes some digital
camera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting file format
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3,
*.WHA, *.JPG and *.JPEG. Due to
particularity of file code and file mode,
It is possible that some files cannot be
read.
2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, the speed of picture operation
response might be affected.
3.Before starting operation, verify
USB storage device is of FAT32 and
FAT file system format. At present, this
television does not support NTFS and
the file systems of other format.
4.Many movie files use suffix of AVI and
MPG. However, many kinds of format
are used for internal files. This
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played for
movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current not over 500mA).
6. Some time the television operation
may be halted due to excessive rate
of information code errors. In such
case, restart the system. As there are
many nonstandard USB mobile
devices in the market. If this kind of
USB mobile devices are used in the
stream media play system, the
problem of identification failure
might occur. The same problem may
also happen with computers, not
televisions.
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information reading and continuity of
information play.
Steam Media Broadcast System Steam Media Broadcast System
Removing USB device
1
press RETURN button to exit menu.
3 Remove the memory USB device.
Press up or down to select Remove USB1 or
Remove USB2, and press ENTER button to
ensure it.
2
USB data protection
- Do not remove the USB device when the content is being read or when
browsing. Such action may damage the USB device.
SETUP
File Copy
USB1
USB2
Remove USB1
Press ENTER key to play this devices
AAA Multimedia Player
Remove USB2
20
21
Steam Media Broadcast System Steam Media Broadcast System
1. Press up or down to select the item with up or down.
2 Press or to select the desired item of submenu
with left or right.
3 Press ENTER button to ensure the desired option to
enter the submenu to resume the speed of standard.
4. Press or button to operate play quickly or slowly.
5.Press pause button to make the program stop and press
again to resume it.
6.Press ZOOM button to make zoom, and press or
or / button to enjoy the detail.
8 press RETURN button to return to previous menu and
stop play, press RETURN button repeatedly to return to main
menu.
To start the media play
1. Press USB button to enter media play system.
2. Press up or down button
to select the desired option.
3. Press ENTER button to
enter desired option.
4. Press to return the
previous menu.
5. If to exit USB system, you need to return to the main
menu to protection card data.
RETURN
SETUP
File Copy
USB1
USB2
Remove USB1
Press ENTER key to play this devices
To operate the menu
AAA Multimedia Player
7 Press HELP button to call up or exit the OSD information.
And press HELP button to call up or exit the OSD during
operating file copy.
Note: If there are no operation one minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system to exit the saver menu.
USB
ZOOM
RETURN
HELPENTER
Remove USB2
1. Press up or down
button to select Picture item.
2. Press ENTER button to
enter the menu of play.
3. Press again up or down
button to select desired
enjoy picture, and then
press ENTER button to enter
the play menu.
4. On screen display, Press
or to select the speed
of play.(Normal, Slow, Fast).
5. Press or button to
swap the picture of next and
previous. Press RETURN button
to return.
To play picture
JPEG
0016.JPG
Play
Slideshow speed Slow
IMAGE
To enjoy the picture detail
1. After selecting the picture to play, press ZOOM to
select desired zoom.
2. Press HELP button to exit the display, and then
press or or or
to move and enjoy the picture detail.
To select stream media broadcast system
1.Press up or down button
to select "USB1"or "USB2".
(The device be inserted
and identified).
2. Press ENTER button to
enter adjusted option.
Picture
Music
Movie
Music and Pic
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
To make the picture overturn
0
Each press of button to make overturn 90 with right,
press ENTER button to resume the program playing.
AAA Multimedia Player
AAA Multimedia Player
Note:
the play file menu are
different with your USB
devices.
USB
ZOOM
RETURN
HELPENTER
SETUP
File Copy
USB1
USB2
Remove USB1
Press ENTER key to play this devices
AAA Multimedia Player
Remove USB2
Note:
1.The speed may be
slowerwhen the picture
of 1024x768 or more is
enjoyed.
2.After the menu
adjusted, the display
may not disappear
automatically, you could
press HELP button to exit
immediately.
22
23
Steam Media Broadcast System Steam Media Broadcast System
1. Press up or down button
to select "Music" option.
2. Press ENTER button to enter
play menu.
3. Press up or down button to
select desired music, and
then press ENTER button to
play music.
Note: The play file menu are
different with your USB device.
4. When playing music,
press up or down to select
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press ENTER button to
ensure the mode.
5. When playing music, press
or button to swap the
next and previous music
6. Press RETURN button to exit
the playing.
Note: 1. DISC Repeat mode: press up or down button,
the DISC Repeat will appear on
the screen, and then press
ENTER to ensure it.
2. Program mode:
press or button to select
the music in right list, and press
ENTER button to program in turn,
and then press button to
select "Done", and then press ENTER button
to ensure it.
To enjoy music
The day went away .MP3
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
Play mode standard
The day you went away.MP3
01 07 / 04 20
The day went .MP3
Soft .MP3
Done
The day went .MP3
Soft .MP3
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
1. Press up or down button to
select "Movie" option.
2. Press ENTER to enter play
menu.
3. Press again up or down
button to select desired
music, and press again
ENTER button to play it.
4. On screen display, press
or button to select in
turn:
File -PlayBack Control-Audio
channel-Play Mode
5. Press or button
to set speed, press ENTER button
to resume to standard mode.
6. Press or button to
select the next movie or
previous.
7. Press RETURN button repeatedly
to return.
To play Movie
E08-8SOBTILES-1
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
24
25
Steam Media Broadcast System Steam Media Broadcast System
1. Press up or down button
to select "Music and Pic"
option, and press ENTER
button to enter menu.
2. Press up or down to select
desired file, and press
button to ensure it.
( to cancel). Repeat step
2 to select more file, and
press ENTER button to enter
play menu.
3. On screen display menu,
press up or down to select
the speed to play.( Normal,
Slow, Fast).
4. Press or button
to swap the next and previous
picture, press or
button to select the music.
Note: press pause button to
stop playing the picture.
5. Press repeatedly RETURN button
to return.
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
MP3
The day you went away .MP3
JPEG
0016.JPG
Play
Play mode standard
IMAGE
00 01:43
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
Note: On the music and picture, the playing music
is only *.mp3 format.
To select the Music and PIC item
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
Note:The default of playing music is Normal.
1. Press up or down to select
"File Copy" item.
2. Press ENTER button to enter
the copy menu.
3. Press ENTER button to
enter the file menu, and
press up or down button to
select "Card" or "USB"
4. Press ENTER button to enter
USB1 or USB2, and press up
or down button select the
files to copy, then press
HELP button to call up COPY
and PASTE, and then press
/ button to select
COPY, and press ENTER button
to confirm, press again
/ button to select
PASTE, then press
ENTER button to paste, in this
time, the "File already exits,
overwrite it "will appears
on the screen, and press
or button to select
YES/NO, and then press ENTER
button to confirm.
5. Press ENTER to cancel.
Copy file function
USB1
Select source Port:
USB2
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Root
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Root
COPY
PASTE
Note:
button to select the
all files;
button to cancel.
USB
ZOOM
RETURN
HELPENTER
SETUP
File Copy
USB1
USB2
Remove USB1
Press ENTER key to play this devices
AAA Multimedia Player
Remove USB2
26
27
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTIONEXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
300 Twin-lead cable
75 coaxial cable
Antenna adapter
additional purchase
Plug
additional purchase
Outdoor antenna
additional purchase
AC power socket
Antenna input
75 standard coaxial type
Power cord of the TV
Antenna Connection
ANT
BACK OF SET
Note:
It is recommended that you had better use 75 coaxial cable to remove the
disturbance caused by airwave.
Do not bind antenna cable and electric wire together.
The figure in the manual is just for an example, please see the real set.
Note:
1. Use VGA cable
2. Avoid still picture and 4:3 picture displaying on the screen
for long time to save the screen.
3.All the equipment is not the accessories of this set.
PC connection
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
Av1 AUDIO1 IN
ANT
AC IN
Note:
1. If the temperature of the TV set is rather low, it is normal that there may be some
artifacts when the set is first turned on.
2. Nonconforming pixels may occur on the panel, but they have no influence on the
normal function of the display.
3. In the standard operation, It is normal if there is one bright dot or dark dot on the
screen.
VGA
SVGA
XGA
640*480
800*600
1024*768
31.5KHz
37.9KHz
48.4KHz
60Hz
60Hz
60Hz
Mode
Resolution
Horizontal
Frequency
Vertical
Frequency
RESOLUTION:
Note: The above parameters are VESA standard.
28
29
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTIONEXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
Video connection
VCR
S-VIDEO VCR
DVD player
S-VIDEO OUTPUT
Y Pb/Cb Pr/Cr
output
VIDEO OUTPUT
AUDIO OUTPUT
Y
Pb/Cb
Pr/Cr
Component connection
Audio output
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
HDMI connection
HDMI
HDMI
How to connect the output to other equipment
VCR
VIDEO
output
AUDIO
output
TV
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
Y
U
V
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OU T AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
Note: You had better not connect more than one signal so that can receive better effect .
External equipment connection just take L37A9A-AK for example, please see the real set.
30
31
32
SPECIFICATIONS
Screen
Type
Viewable angle
Color system
Sound system
Video input
TV/VIDEO
PAL, NTSC (AV)
DTV Y/Pb/Pr
Power
Power consumption
Environment conditions
Accessory
Composite: 480i/p, 576i, 720p,1080i,1080p
See rating plate
CVBS, S-VHS, YPb/Pr, YCb/Cr, VGA,HDMI
DK, I, BG,MN
Working temperature:
Working humidity:
Storage temperature:
Storage humidity:
+5 +35
20%-80%
-15 +45
5%-90%
User s manual
Warranty card
Remote control
Power cord
Battery
The design and specifications are subject to change without notice.
A-si TFT active maxrix
See rating plate
The part specifications of this TV set provided here are for reference only.
Difference may occur as product technology is updated.
Model
Power consumption
Size WxHxD (base included
Max.160W
807mmX643mmX236mm
Max.160W
810mmX621mmX246mm
L32A9A-A
L37A9A-AK
946mmX708mmX310mm
Max.180W
L32A1A-A
Max.160W
680mmX565mmX235mm
L26A9A-A
Warranty card is only for special countries and areas.
33
Note:1.If the problem can not be fixed after you check above items. DO NOT attempt
to remove the back cover by yourself.
2.A snapping sound from the cabinet of the TV set can be heard occasionally.
This is normal and is caused by temperature changes of the operating environment
and does not affect the operation of the set.
TROUBLE SHOOTING GUIDE
BREAKDOWN PHENOMENON
PICTURE
SOUND
CHECK FOR
The direction and connection of the
antenna
Direction, station and connection
of the antenna
Interference from electric
appliance. Automobile Motor,
Vehicle Fluorescence lamp etc.
Volume, Sound mute
The power plug isn't plugged in AC
outlet. The main power isn't turned
on. The setting up of contrast, brig-
htness and volume.
Adjust color control
Adjust channel again
The following problems are not always caused by hardware failure, please use the
follow trouble shooting guide before you call for service:
?
Picture with Snow
No Color
No Picture
Normal
Disturb
Double or Triple Image
Noise
Normal
Noise
No Sound
No Sound
Normal Volume
Normal or Weak Volume
??
Scramble
3.Do not let the TV set stay on a static images, as this can lead to permanent
residual images. If this situation occurs, the TV set may recover normal
automatically after 12 hours if you switch the TV set to dynamic programming.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
Haier L32A1A Owner's manual
- Category
- LCD TVs
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Haier 15HL25S - 15" LCD TV User manual
-
-
Haier L37A10A Operating Instructions Manual
-
-
-
-
-
-
Haier L32A9A-A Operating Instructions Manual
-
Other documents
-
Philips 24PFL5505/V7 User manual
-
-
-
Palsonic Flat Panel Television 76WSHD User manual
-
Hitachi LE32A300 User manual
-
-
-
Sanyo VMC-L2019 User manual
-
Amkette FlashTV Quick start guide
-
Lenco DVT-2622 User manual
