Haier L26A9A Owner's manual

Brand: Haier

Model: L26A9A

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

0090506952C

Please read this manual carefully

before operating the unit, and keep

it for future reference.

TFT-LCD COLOUR TELEVISION RECEIVER

OWNER'S MANUAL

This User's Manual is applicable for the following models:

L26A9A, L32A9A, L32A1A, L37A9A-AK

CONTENTS

WARNING AND CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR

ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:

THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.

IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY

INSIDE PART OF THIS PRODUCT.

THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS

SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING. OPERATION AND MAINTENANCE HAS BEEN

INCLUDED WITH THIS PRODUCT.

CAUTION

DO NOT OPENDO NOT OPEN

RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,

DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.

DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY

SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT

WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED

AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.

Warning and caution...........................................................................................2

Buttons and interface position............................................................................5

Front control panel.........................................................................................5

Back interface.................................................................................................6

Side

Preparation for remote control..........................................................................7

Remote control panel..........................................................................................8

Basic operation.................................................................................................9

Power on/off TV............................................................................................9

TV program selection and volume adjustment..............................................9

Recall............................................................................................................9

Mute function................................................................................................9

OSD language selection.................................................................................9

Screen display...................................................................................................10

TV program setting..........................................................................................11

Auto search...................................................................................................11

Manual search...............................................................................................11

Fine tune.......................................................................................................12

Skip...............................................................................................................12

Exchange.......................................................................................................13

Image control....................................................................................................13

Set your favourite picture mode....................................................................13

Noise reduce..................................................................................................13

Picture mode /sound mode selection.............................................................14

Sound control...................................................................................................14

Sound effect control......................................................................................14

System setting function....................................................................................14

OSD background setting...............................................................................14

Signal source setting......................................................................................15

Screen display picture zoom setting..............................................................15

Other setting function.......................................................................................15

Sleep timer setting.........................................................................................15

PIP setting......................................................................................................16

Sound source setting......................................................................................16

Color temperature..........................................................................................17

Digital filter setting........................................................................................17

AAA setting...................................................................................................17

H-POSITION/ V-POSITON/DURATION.........................................................18

Color and time on/of setting.........................................................................18

CHILD LOCK...............................................................................................19

Steram Media Broadcast System.................................................................20

External audio and video equipment connection..............................................28

Specifications...................................................................................................32

Trouble shooting guide.......................................................................................33

interface..................................................................................................6

WARNING AND CAUTION

Please ensure that the set has adequate

ventilation.

Do not put the unit near water or oil as it

may cause a fire.

During thunderstorms, unplug both the

antenna and power plug to prevent

damage.

Do not use a damaged power plug or put

the power supply wire near a heat source

as it may cause electric shock or fire.

To prevent potential fire, do not overload

an electrical outlet with too many plugs.

Place the set on a level surface to

prevent it from tipping and potential

damage.

Do not remove the cover of the set

or try to service. This may result in

electric shock or fire. All service

work must be completed by an

authorized technician.

Do not place the power adapter near

a heat source or it may cause a fire.

If there are any abnormal sounds or

smells from the unit, unplug

immediately and contact an authorized

service provider.

WARNING AND CAUTION

To prevent fire, do not use or store any

flammable materials near the unit.

To prevent fire, do not place the unit near

a damp wall.

To prevent electric shock, ensure that

any external antenna connected to the set

is clear of contact with any power lines.

Do not plug / unplug the unit while your

hands are wet. This may cause an electric

shock.

Please ensure a solid connection with

the AC wall socket in order to avoid

shock and potential fire.

To prevent electric shock or fire, please

note to prevent rain from entering the set

along the wire connected to the outside

antenna.

When cleaning, please unplug the unit.

Use a soft cotton cloth. Do not use any

abrasive cleansers, and prevent water

from entering the set.

If any plugs or input wires are dirty, unplug

the set and clean. This will prevent risk of

electric shock or fire.

If the set is not going to be used for an

extended period, unplug the unit from

the AC wall outlet.

Do not place the set near a heat source or

in direct sunlight.

BUTTONS AND INTERFACE POSITION

Front control panel

Menu button

TV/AV switch button

Program down/up button/item down/up selected

Volume down/up button/item left/right selected and enter

Power button

Power indicator

Remote sensor

P-

P+

TV/AV

V-

V+

POWER

MENU TV/AV

P- P+ V- V+

POWER

1 2 3 4 5 67

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

AV1 AUDIO1 IN

ANT

AC IN

Back panel

L37A9A-AK

Side panel

USB1

USB2

USB1 jack

USB2 jack

VGA

AUDIO IN

Y Pb/Cb Pr/Cr

YPb/CbPr/Cr L-IN R-IN

V-OUT L-OUT R-OUT

S-

VIDEO

AV2 L R

AV1 L R

ANT

POWER

L26A9A-A/L32A9A-A/L32A1A-A

HDMI IN

1 VGA input

2 VGA audio input

3 Component video input

4 VIDEO/AUDIO output

5 Component/S-VIDEO audio input

6 S-VIDEO input

7 VIDEO/AUDIO input1

8 VIDEO/AUDEO input2

9 Antenna input

10 Power cord socket

11 Power switch Please according to the real set

12 HDMIVIDEO and AUDIO input

BUTTONS AND INTERFACE POSITION

PREPARATION FOR REMOTE CONTROL

Remote control installation

1. According to the figure display below, place the remote control with face down,

then open the cover of battery apartment.

2. As in the figure display below, install two AA batteries. (The + and - symbol of

battery must match with the marks on the remote).

3.Close the cover of battery apartment.

Cautions for using remote control

Confirm there is no object between the

remote control and the remote sensor

of TV set.

Sunshine or other strong light will

interfere the signal sent by the remote

control. In this situation turn the TV

set to avoid the direct light source.

Do not put the remote control in direct

heat or a damp place, or potential

damage to the remote may occur.

Please use two AA 1.5V batteries.

Do not mix battery types.

Install the batteries as the correct

polarities.

Do not use the rechargeable batteries.

REMOTE CONTROL PANEL

Power button

Mute button

TV/AV switch button

Display button

Dynamic AAA HDTV on/off button

PIP function on/off button

PIP main/sub picture switch button

PIP sound selection button

Digital selection button

Program recall button

Child lock button

Picture mode selection button

Sound mode selection button

Program up/down button, direction

selection button

Volume up/down button, direction

selection button

Menu call/exit button

Color system selection button

Sound system selection button

Program scan button

Picture still button

Picture size selection button

Sleep timer button

This function is not available

main/sub

Buttons and Descriptions

BASIC OPERATION

1. If the TV set is in standby status, press power

switch on the remote control or TV set (or CH+/-/P+/-

on the remote control)can cancel the standby status,

then enter the power on status.

2. Press power switch on the remote control or

the TV set again, the TV set will enter standby

status.

Standby set: first connect the power supply wire,

then turn the power switch on the back of TV set on(if

there is a power switch button).

TV PROGRAM SELECTION AND VOLUME

ADJUSTMENT

You can use CH+/- button or direct-digit choosing

button to select the TV channel number.

Press VOL+/- button to adjust the volume.

RECALL

Pressing RECALL button can switch the channel to the

last channel you watched.

MUTE FUNCTION

1. Press MUTE button to shut off the TV sound, the

screen displays mute mark.

2. Press MUTE button again or VOL+ button to restore

the sound.

OSD LANGUAGE SELECTION

Select the LANGUAGE item in the menu

1. Press MENU and CH+/- button to select OSD setting

menu.

2. Press VOL+/- to enter and CH+/- button to select

LANGUAGE item.

3. Press VOL+/- button to select the language you need.

OSD

MOVE SELECT MENU EXIT

MUTE

TV/AV

SOUND

POWER

MAIN/SUB

PIP

AAA

DISPLAY

POWER ON/OFF TV

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

S.STD

CHILDLOCK

RECALL

CH+

P.STD

C.SYS

S.SYS

CH-

VOL-

VOL+

ZOOM

BACK

SIZE

STILL

SLEEP

SCAN

SOUND

MAIN/SUB

PIP

DISPLAY

TV/AV

AAA

MUTE

POWER

I-II

17/18/19/20/21/24/26/27/29/30 buttons

are for the multi-media ,reference to

the instruction following.

The USB multi-media is only for the

model L37A9A-AK.

SCREEN DISPLAY

For your convenient operation and in order to know the TV set, we offer the below

menus.

Picture setting menu

Sound setting menu

Menu setting menu

Function setting menu

Source setting menu

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

SOURCE

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

OSD

MOVE SELECT MENU EXIT

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

Operation instructions

The real display may be different from the above menus, if you need adjust, please do as

follows:

1.Press MENU button to open the menu, use CH+/- button to select every menu

separately, use VOL+/- button to enter.

2.Press CH+/- button to select the item needs adjust.

3.Press VOL+/- button to adjust the selected item, or enter the next menu.

4.Press MENU button to return the last menu or exit the screen menu display.

Note: Press MENU button to select the menu operation in the user manual, please

refer to these operation instructions.

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

SOURCE

MOVE SELECT MENU EXIT

AUTO SEARCH

Using AUTO SEARCH can search all receiving

programs. We recommend using auto search to

search the program when you use this TV set for

the first time.

1.Press MENU and CH+/- button to select SOURCE

menu and VOL+/- to enter.

2.Press CH+/- button to select AUTO SEARCH.

3.Press VOL+/- button to start searching, press MENU

button to finish auto search.

Note: The order of the auto search is due to the

frequency of the program, generally speaking,

it is used only at the first time you search the

program, and once the order of the program has

been confirmed, you do nott have to use this

function, otherwise the order of the program

will be changed.

MANUAL SEARCH

Manual search can search and order the program freely.

1. Press MENU and CH+/- button to select the SOURCE

menu and VOL+/- to enter.

2. Press CH+/- button to select MANUAL SEARCH,

press VOL+/- button to enter the next menu.

3. Press CH+/- button to select SEARCH NEXT.

4. Press VOL+/- button to start searching, pressing

VOL+ button is used to search the higher frequency

channel, pressing VOL- button is used to search the

lower frequency channel, when you have searched

a program, the searching will stop automatically.

You can press VOL+/- button to go on searching or

press MENU button to exit.

Note: During searching, it may appear black screen

because of change of signal, it is normal, it will

recover after finishing searching.

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

TV PROGRAM SETTING

SKIP

TV PROGRAM SETTING

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

When you can not get a satisfactory picture effect,

you can fine tune to obtain.

1. Press MENU and CH+/- button to select SOURCE

menu and VOL+/- to enter.

2. Press CH+/- button to select MANUAL

SEARCH, press VOL+/- button to enter the next

menu.

3. Press CH+/- button to select FINE TUNE.

4. Press VOL+/- button to start fine tune until you

obtain the best picture and sound, then loose

the button, press MENU button to exit.

1. Select the program number you need skip.

2. Press MENU and CH+/- button to select SOURCE

menu and VOL+/- to enter.

3. Press CH+/- button to select the MANUAL

SEARCH, press VOL+/- button to enter the

next menu.

4. Press CH+/- button to select SKIP, press

VOL+/- button to select ON.

5. Press MENU button to shut off the menu.

When you use CH+/- button to select channel,

this channel number will be skipped. But you

can still use one direct-digit choosing button to

select the skipped channel number.

Note: How to recover the skipped channel number

1. Press direct-digit choosing button to select the

channel number that needs recover.

2. Repeat the steps above.

3. Press CH+/- button to select SKIP, press VOL+/-

button to select OFF.

FINE TUNE

CURRENT CHANNEL 15

SKIP OFF

TARGET CHANNEL 28

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

1. Press MENU and CH+/- button to select SOURCE

menu and VOL+/- to enter.

2. Press CH+/- button to select MANUAL

SEARCH, press VOL+/- button to enter the next

menu.

3. Press CH+/- button to select TARGET CHANNEL,

press VOL+/- button to select the channel you need

exchange.

4. Press CH+/- button to select EXCHANGE, press

VOL+/- button to exchange, as figure, exchange

the current channel number 15 to channel number

28.

5. Press MENU button to save and exit.

SET YOUR FAVOURITE PICTURE MODE

1. Press MENU and CH+/- button to select PICTURE

menu and VOL+/- to enter.

2. Press CH+/- button to select the item that needs

adjust.

3. Press VOL+/- button to adjust the selected item,

the detailed adjustment is as following table.

The table of picture item adjustment effect

Items

VOL- VOL+

Contrast

Brightness

Saturation

Tint

Sharpness

Weak

Strong

Dark

Bright

Light

Thick

Green

Red

Soft Sharp

Note: TINT is only valid in NTSC system.

NOISE REDUCE

Noise reduce can decrease the noise of picture

1. Press MENU and CH+/- button to select PICTURE

menu and VOL+/- to enter.

2. Press CH+/- button to select the NOISE REDUCE.

3. Press VOL+/- button to select OFF, WEAK or

STRONG as your require.

EXCHANGE

TV PROGRAM SETTING

IMAGE CONTROL

SET YOUR FAVOURITE PICTURE MODE

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

PICTURE MODE/SOUND MODE SELECTION

TRANSPARENCY

75 100 300 1K 3K 5K 10K 15K

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

OSD

MOVE SELECT MENU EXIT

MOVE

SELECT MENU EXIT

MOVE

SELECT MENU EXIT

Press P.STD button on the remote control

continually, the following four picture modes

can be selected in turn.

NATURAL: common mode.

SOFT: the image effect is soft.

USER: set the image effect you like.

BRIGHT: suitable for sport image.

NATURAL

BRIGHT PERSONAL SOFT

Press S.STD button on the remote control

continually, the following four sound modes

can be selected in turn.

You can also enter picture and sound menu to adjust.

NORMAL

MUSIC PERSONAL

NEWS

You can select your favourite sound modes, and adjust

the BALANCE and EQUALIZER of sound.

1. Press MENU and CH+/- button to select SOUND menu.

2. Press VOL+/- to enter and CH+/- button to select the

sound item you need set.

3. Press VOL+/- button to adjust the selected item.

BALANCE: Press VOL+/- button to enter adjustment,

use VOL+/- button to adjust the balance of left and

right sound.

EQUALIZER: Press VOL+/- button to enter EQUALIZER

set menu, use VOL+/- button to select every different

frequency, use CH+/- button to adjust.

The higher of the transparency set value is,

the higher of the OSD transparency is, whereas,

the transparency is lower.

1. Press MENU and CH+/- button to select OSD setting menu.

2. Press VOL+/- to enter and CH+/- button to select the

TRANSPARENCY item.

3. Press VOL+/- button to set the transparency value.

Note: Sound source only can be adjusted in PIP mode.

SYSTEM SETTING FUNCTION

CHILD LOCK

P.STD

CHILD LOCK

P.STD

RECALL

S.STD

RECALL

S.STD

IMAGE CONTROL

SOUND CONTROL

OSD BACKGROUND SETTING

SOUND EFFECT CONTROL

SYSTEM SETTING FUNCTION

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTE

AUTO SEARCH

MANUAL SEARCH

SOURCE

MOVE SELECT MENU EXIT

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

There is different signal source mode in this TV set,

you can select according to your require: TV,

AV1, AV2, S-VIDEO, USB, YPBPR, VGA, HDMI.

1. Press MENU and CH+/- button to select SOURCE

menu and VOL+/- to enter.

2. Press CH+/- button to select PICTURE SOURCE.

3. Press VOL+/- button to select the signal source

mode you need.

4. You can press TV/AV button on the remote

control to select directly.

SCREEN DISPLAY PICTURE ZOOM SETTING

There is different screen display picture zoom,

you can select according to your require: FULL,

ZOOM1, ZOOM2, NORMAL.

1.Press MENU and CH+/- button to select PICTURE

menu and VOL+/- to enter.

2.Press CH+/- button to select SIZE MODE.

3.Press VOL+/- button to select the zoom you need.

4.You can press ZOOM button on the remote

control to switch.

OTHER SETTING FUNCTION

After you set the sleep timer, the TV set will count

from the setting time, when the count time is coming,

the TV set will turn off automatically.

Press SLEEP button to enter off time set, you can

select the certain time: OFF, SLEEP 15(Min), SLEEP

30(Min), SLEEP 60(Min)...SLEEP 240(Min), after

setting, the TV set will start counting.

Note: if you want to see the off time you set, press

SLEEP button. If you want to cancel the sleep time

set, follow the above procedures, set the time OFF.

You could also set the sleep time in function menu.

SIGNAL SOURCE SETTING

SLEEP TIMER SETTING

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

SOUND

Note:USB mode is only available

in model L37A9A-AK

PIP SETTING

This TV set support PIP function, it can display

picture of two sources at the same time.

1.Press MENU and CH+/- button to select source menu.

2.Select PIP mode, use VOL+/- button to select

P1S1, P1S2, P2S1, P2S2, P3S1, P3S2, P4S1,

P4S2 or OFF mode, open PIP function.

3.Select PICTURE SOURCE, use VOL+/-

button to change the input source of main picture,

such as TV, AV1, AV2 and so on.

4.Select SUB PICTURE source, use VOL+/- button to

change the input source of sub picture, such as

VGA, YPBPR and so on.

Note:

1. After switching the main picture source, it will

shut off the PIP function, if need, you can open

this function again.

2. The following two suit

can use PIP function,

the same suit source

can not use PIP

function, source1

and source2 can switch.

3.You can press PIP button on the remote control

to turn on or turn off the PIP function.

4.You can press MAIN/SUB button on the remote

control to switch the main picture and sub picture.

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

SOURCE

MOVE SELECT MENU EXIT

SOURCE1

SOURCE2

TV, AV1, AV2, S-VIDEO, USB

VGA, , HDMIYPBPR

SOUND SOURCE SETTING

After the PIP function is open, this item is activated,

you can select the main picture sound or sub picture

sound of current broadcasting sound.

1.Press MENU and CH+/- button to select SOUND

menu and VOL+/- to enter.

2.Press CH+/- button to select SOUND SOURCE.

3.Press VOL+/- button to change the current sound to

main picture sound or sub picture sound.

Note:

1.You can also press SOUND button on the remote

control to switch the main picture sound or sub

picture sound.

2.After switching the sound to sub picture sound, you

can switch the source in sub picture.

OTHER SETTING FUNCTION

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

1.Press MENU and CH+/- button to select FUNCTION

menu and VOL+/- to enter.

2.Press CH+/- button to select COLOR TEMP.

3.Press VOL+/- button to select DEFAULT 6500K

7300K 8500K 9300K USER

Note: PERSONAL is the color temperature of picture

you set through D FILTER.

DIGITAL FILTER SETTING

Use D FILTER can adjust the color temperature

exactly.

1.Press MENU and CH+/- button to select FUNCTION

menu and VOL+/- to enter.

2.Press CH+/- button to select D FILTER.

3.Press VOL+/- button to select the COLOR TEMP,

use CH+/- button to adjust.

AAA SETTING

AAA function can improve the quality of picture and

make the picture best.

1.Press MENU and CH+/- button to select FUNCTION

menu and VOL+/- to enter.

2.Press CH+/- button to select AAA.

3.Press VOL+/- button to select ON, OFF, DEMO or

SPLIT.

4.Press AAA button on the remote control to start

and select AAA mode.

DEMO: Use one moved sub picture in the picture to

start AAA function.

SPLIT: Separate the picture from left and right, start

AAA function in left picture.

Note:

It can not use the AAA function with

no signal and in YPBPR/VGA/PIP mode

COLOR TEMPERATURE

OTHER SETTING FUNCTION

Note: USB source is only

available in model L37A9A-AK

OTHER SETTING FUNCTION

H-POSITION/V-POSITION/DURATION

1 Press MENU and CH+/- to select OSD and

VOL+/- to enter .

2 Press CH+/- to select H-POSITION(V-POSITION/

DURATION).

3 Press VOL+/- to adjust.

Clock and time on/off setting

Using on/off timer function , the TV set can automatically

turn on to a program or shut down at a preset time.

Time on/off function

You should check if the display time fo the set is

the same with the standard time of your place, if not,

you could adjust it as following.

Clock setting

2 Press CH+/- to select CLOCK and VOL+/- to enter

after pressing VOL+/- to select the position you want

to adjust, press VOL+/- to adjust.

1 Press MENU and CH+/- to select FUNTION menu

and VOL+/- to enter.

3 After time setting, press MENU to exit

Clock time is the standard of other time

3 Repeat steps1and 2 to set TIME OFF.

2 Press CH+/- to select TIME ON and VOL+/-

to enter, after pressing VOL+/- to select

the position you want to adjust press CH+/-

to set.

1 Press MENU and CH+/- to select FUNCTION menu

and VOL+/- to enter.

OTHER SETTING FUNCTION

Press CHILDLOCK button, password will appear

on the screen.Input 6666 (the initial password of the

television )to enter the menu .

1.Press CH+/- to select the first item and VOL+/-

to select the source and CHILDLOCK to turn on/off

the selected source.

2.Press CH+/- to select TV CHANNEL and CH+/-

to select position, then VOL+/- to change the

channel number(0-255), press CHILDLOCK to

turn on/off the selected channel.

3.Press CH+/- to select TV SEARCH and VOL+/-

or CHILDLOCK to turn on/off the function.

4.Press CH+/- to select VOLUME LOCK and

VOL+/- to set the max volume(10-100)

5.Press CH+/- to select PW.CHANNEL and

to set the channel number , then the TV can turn

on to the channel you have set.

6.Press CH+/- to select CLEAR ALL and VOL+/-

to unlock all the lock you have set.

8.Default of BUS is ON, can not be adjusted

VOL+/-

Press CH+/- to select CHANGE PASSWORD and

VOL+/- to enter the menu, input the new password

and confirm password to change the password.

AV1

TV CHANNEL 000

PW.CHANNEL

BUS

VOLUME LOCK

100

CHANGE PASSWORD

CLEAR ALL

TV SEARCH

UNLOCK

PLEASE INPUT PASSWORD

* * * *

CONFIRM * * * *

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

OSD

MOVE SELECT MENU EXIT

Note: H-POSITION and V-POSITION are used to adjust

horizontal and vertical position, DURATION is used to adjust

the time of the menu display.

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

PLEASE INPUT PASSWORD

* * * *

PLEASE INPUT PASSWORD

* * * *

CHILD LOCK

Stream media play prepare

1. Supporting equipment

1.Equipment supporting Mass and

Storage agreements include USB,

mobile hard disk, card reader, some

MP3 and digital camera.

2.Equipment supporting PTP

agreement includes some digital

camera.

2. 1 Supporting media:

picture, music, MPEG4, MPEG2

and MPEG1;

Supporting file format

*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3,

*.WHA, *.JPG and *.JPEG. Due to

particularity of file code and file mode,

It is possible that some files cannot be

read.

2 If Pic & Music mode is activated,

relative media file format will include

JPEG and MP3 files. After Picture is

selected, MP3 files set for play will

open both music and picture files for

sync play performance. As some files

must be read while music is being

played, the speed of picture operation

response might be affected.

3.Before starting operation, verify

USB storage device is of FAT32 and

FAT file system format. At present, this

television does not support NTFS and

the file systems of other format.

4.Many movie files use suffix of AVI and

MPG. However, many kinds of format

are used for internal files. This

television can only play some AVI

and MPG files of this format. Those

files with suffix of dat are not movie

files, but data files used by

computers, and cannot be played for

movies.

5.External card reader supports

most digital cards available in the

market. Readable digital cards are

classified according to the property

of card readers and can be

connected to mobile hard disks

(working voltage 5.0V, working

current not over 500mA).

6. Some time the television operation

may be halted due to excessive rate

of information code errors. In such

case, restart the system. As there are

many nonstandard USB mobile

devices in the market. If this kind of

USB mobile devices are used in the

stream media play system, the

problem of identification failure

might occur. The same problem may

also happen with computers, not

televisions.

7.It is suggested that the external

devices with USB2.0 interface be

used to improve velocity of

information reading and continuity of

information play.

Steam Media Broadcast System Steam Media Broadcast System

Removing USB device

press RETURN button to exit menu.

3 Remove the memory USB device.

Press up or down to select Remove USB1 or

Remove USB2, and press ENTER button to

ensure it.

USB data protection

- Do not remove the USB device when the content is being read or when

browsing. Such action may damage the USB device.

SETUP

File Copy

USB1

USB2

Remove USB1

Press ENTER key to play this devices

AAA Multimedia Player

Remove USB2

Steam Media Broadcast System Steam Media Broadcast System

1. Press up or down to select the item with up or down.

2 Press or to select the desired item of submenu

with left or right.

3 Press ENTER button to ensure the desired option to

enter the submenu to resume the speed of standard.

4. Press or button to operate play quickly or slowly.

5.Press pause button to make the program stop and press

again to resume it.

6.Press ZOOM button to make zoom, and press or

or / button to enjoy the detail.

8 press RETURN button to return to previous menu and

stop play, press RETURN button repeatedly to return to main

menu.

To start the media play

1. Press USB button to enter media play system.

2. Press up or down button

to select the desired option.

3. Press ENTER button to

enter desired option.

4. Press to return the

previous menu.

5. If to exit USB system, you need to return to the main

menu to protection card data.

RETURN

SETUP

File Copy

USB1

USB2

Remove USB1

Press ENTER key to play this devices

To operate the menu

AAA Multimedia Player

7 Press HELP button to call up or exit the OSD information.

And press HELP button to call up or exit the OSD during

operating file copy.

Note: If there are no operation one minute later, the

TV will enter the saver automatically, at the time, press

any button of USB system to exit the saver menu.

USB

ZOOM

RETURN

HELPENTER

Remove USB2

1. Press up or down

button to select Picture item.

2. Press ENTER button to

enter the menu of play.

3. Press again up or down

button to select desired

enjoy picture, and then

press ENTER button to enter

the play menu.

4. On screen display, Press

or to select the speed

of play.(Normal, Slow, Fast).

5. Press or button to

swap the picture of next and

previous. Press RETURN button

to return.

To play picture

JPEG

0016.JPG

Play

Slideshow speed Slow

IMAGE

To enjoy the picture detail

1. After selecting the picture to play, press ZOOM to

select desired zoom.

2. Press HELP button to exit the display, and then

press or or or

to move and enjoy the picture detail.

To select stream media broadcast system

1.Press up or down button

to select "USB1"or "USB2".

(The device be inserted

and identified).

2. Press ENTER button to

enter adjusted option.

Picture

Music

Movie

Music and Pic

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

To make the picture overturn

Each press of button to make overturn 90 with right,

press ENTER button to resume the program playing.

AAA Multimedia Player

Note:

the play file menu are

different with your USB

devices.

USB

ZOOM

RETURN

HELPENTER

SETUP

File Copy

USB1

USB2

Remove USB1

Press ENTER key to play this devices

AAA Multimedia Player

Remove USB2

Note:

1.The speed may be

slowerwhen the picture

of 1024x768 or more is

enjoyed.

2.After the menu

adjusted, the display

may not disappear

automatically, you could

press HELP button to exit

immediately.

Steam Media Broadcast System Steam Media Broadcast System

1. Press up or down button

to select "Music" option.

2. Press ENTER button to enter

play menu.

3. Press up or down button to

select desired music, and

then press ENTER button to

play music.

Note: The play file menu are

different with your USB device.

4. When playing music,

press up or down to select

play mode, (play mode:

standard, program, Random;

Repeat mode: Disc Repeat,

Folder Repeat, File Repeat)

and press ENTER button to

ensure the mode.

5. When playing music, press

or button to swap the

next and previous music

6. Press RETURN button to exit

the playing.

Note: 1. DISC Repeat mode: press up or down button,

the DISC Repeat will appear on

the screen, and then press

ENTER to ensure it.

2. Program mode:

press or button to select

the music in right list, and press

ENTER button to program in turn,

and then press button to

select "Done", and then press ENTER button

to ensure it.

To enjoy music

The day went away .MP3

Picture

Music

Movie

Music and Pic

AAA Multimedia Player

Play mode standard

The day you went away.MP3

01 07 / 04 20

The day went .MP3

Soft .MP3

Done

The day went .MP3

Soft .MP3

USB

ZOOM

RETURN

HELPENTER

USB

ZOOM

RETURN

HELPENTER

1. Press up or down button to

select "Movie" option.

2. Press ENTER to enter play

menu.

3. Press again up or down

button to select desired

music, and press again

ENTER button to play it.

4. On screen display, press

or button to select in

turn:

File -PlayBack Control-Audio

channel-Play Mode

5. Press or button

to set speed, press ENTER button

to resume to standard mode.

6. Press or button to

select the next movie or

previous.

7. Press RETURN button repeatedly

to return.

To play Movie

E08-8SOBTILES-1

Picture

Music

Movie

Music and Pic

AAA Multimedia Player

USB

ZOOM

RETURN

HELPENTER

USB

ZOOM

RETURN

HELPENTER

Steam Media Broadcast System Steam Media Broadcast System

1. Press up or down button

to select "Music and Pic"

option, and press ENTER

button to enter menu.

2. Press up or down to select

desired file, and press

button to ensure it.

( to cancel). Repeat step

2 to select more file, and

press ENTER button to enter

play menu.

3. On screen display menu,

press up or down to select

the speed to play.( Normal,

Slow, Fast).

4. Press or button

to swap the next and previous

picture, press or

button to select the music.

Note: press pause button to

stop playing the picture.

5. Press repeatedly RETURN button

to return.

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

MP3

The day you went away .MP3

JPEG

0016.JPG

Play

Play mode standard

IMAGE

00 01:43

Picture

Music

Movie

Music and Pic

AAA Multimedia Player

Note: On the music and picture, the playing music

is only *.mp3 format.

To select the Music and PIC item

USB

ZOOM

RETURN

HELPENTER

USB

ZOOM

RETURN

HELPENTER

Note:The default of playing music is Normal.

1. Press up or down to select

"File Copy" item.

2. Press ENTER button to enter

the copy menu.

3. Press ENTER button to

enter the file menu, and

press up or down button to

select "Card" or "USB"

4. Press ENTER button to enter

USB1 or USB2, and press up

or down button select the

files to copy, then press

HELP button to call up COPY

and PASTE, and then press

/ button to select

COPY, and press ENTER button

to confirm, press again

/ button to select

PASTE, then press

ENTER button to paste, in this

time, the "File already exits,

overwrite it "will appears

on the screen, and press

or button to select

YES/NO, and then press ENTER

button to confirm.

5. Press ENTER to cancel.

Copy file function

USB1

Select source Port:

USB2

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

Root

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

Root

COPY

PASTE

Note:

button to select the

all files;

button to cancel.

USB

ZOOM

RETURN

HELPENTER

SETUP

File Copy

USB1

USB2

Remove USB1

Press ENTER key to play this devices

AAA Multimedia Player

Remove USB2

EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTIONEXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION

300 Twin-lead cable

75 coaxial cable

Antenna adapter

additional purchase

Plug

additional purchase

Outdoor antenna

additional purchase

AC power socket

Antenna input

75 standard coaxial type

Power cord of the TV

Antenna Connection

ANT

BACK OF SET

Note:

It is recommended that you had better use 75 coaxial cable to remove the

disturbance caused by airwave.

Do not bind antenna cable and electric wire together.

The figure in the manual is just for an example, please see the real set.

Note:

1. Use VGA cable

2. Avoid still picture and 4:3 picture displaying on the screen

for long time to save the screen.

3.All the equipment is not the accessories of this set.

PC connection

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

Av1 AUDIO1 IN

ANT

AC IN

Note:

1. If the temperature of the TV set is rather low, it is normal that there may be some

artifacts when the set is first turned on.

2. Nonconforming pixels may occur on the panel, but they have no influence on the

normal function of the display.

3. In the standard operation, It is normal if there is one bright dot or dark dot on the

screen.

VGA

SVGA

XGA

640*480

800*600

1024*768

31.5KHz

37.9KHz

48.4KHz

60Hz

Mode

Resolution

Horizontal

Frequency

Vertical

Frequency

RESOLUTION:

Note: The above parameters are VESA standard.

EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTIONEXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION

Video connection

VCR

S-VIDEO VCR

DVD player

S-VIDEO OUTPUT

Y Pb/Cb Pr/Cr

output

VIDEO OUTPUT

AUDIO OUTPUT

Pb/Cb

Pr/Cr

Component connection

Audio output

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

AV1 AUDIO1 IN

ANT

AC IN

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

AV1 AUDIO1 IN

ANT

AC IN

HDMI connection

HDMI

How to connect the output to other equipment

VCR

VIDEO

output

AUDIO

output

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

AV1 AUDIO1 IN

ANT

AC IN

D-SUB IN

YUV IN

HDMI

AUDIO IN

AV OU T AUDIO OUT

YUV AUDIOIN

S-VIDEO IN

AV2 AUDIO2 IN

AV1 AUDIO1 IN

ANT

AC IN

Note: You had better not connect more than one signal so that can receive better effect .

External equipment connection just take L37A9A-AK for example, please see the real set.

SPECIFICATIONS

Screen

Type

Viewable angle

Color system

Sound system

Video input

TV/VIDEO

PAL, NTSC (AV)

DTV Y/Pb/Pr

Power

Power consumption

Environment conditions

Accessory

Composite: 480i/p, 576i, 720p,1080i,1080p

See rating plate

CVBS, S-VHS, YPb/Pr, YCb/Cr, VGA,HDMI

DK, I, BG,MN

Working temperature:

Working humidity:

Storage temperature:

Storage humidity:

+5 +35

20%-80%

-15 +45

5%-90%

User s manual

Warranty card

Remote control

Power cord

Battery

The design and specifications are subject to change without notice.

A-si TFT active maxrix

See rating plate

The part specifications of this TV set provided here are for reference only.

Difference may occur as product technology is updated.

Model

Power consumption

Size WxHxD (base included

Max.160W

807mmX643mmX236mm

Max.160W

810mmX621mmX246mm

L32A9A-A

L37A9A-AK

946mmX708mmX310mm

Max.180W

L32A1A-A

Max.160W

680mmX565mmX235mm

L26A9A-A

Warranty card is only for special countries and areas.

Note:1.If the problem can not be fixed after you check above items. DO NOT attempt

to remove the back cover by yourself.

2.A snapping sound from the cabinet of the TV set can be heard occasionally.

This is normal and is caused by temperature changes of the operating environment

and does not affect the operation of the set.

TROUBLE SHOOTING GUIDE

BREAKDOWN PHENOMENON

PICTURE

SOUND

CHECK FOR

The direction and connection of the

antenna

Direction, station and connection

of the antenna

Interference from electric

appliance. Automobile Motor,

Vehicle Fluorescence lamp etc.

Volume, Sound mute

The power plug isn't plugged in AC

outlet. The main power isn't turned

on. The setting up of contrast, brig-

htness and volume.

Adjust color control

Adjust channel again

The following problems are not always caused by hardware failure, please use the

follow trouble shooting guide before you call for service:

Picture with Snow

No Color

No Picture

Normal

Disturb

Double or Triple Image

Noise

Normal

Noise

No Sound

Normal Volume

Normal or Weak Volume

Scramble

3.Do not let the TV set stay on a static images, as this can lead to permanent

residual images. If this situation occurs, the TV set may recover normal

automatically after 12 hours if you switch the TV set to dynamic programming.

Haier L26A9A Owner's manual

Brand: Haier

Model: L26A9A

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Haier L26A9A Owner's manual

This manual is also suitable for

Haier L26A9A Owner's manual

Related papers

Other documents