Cudy GS1020PS2 Installation guide

GS1020PS2
Cudy
Brand
Cudy
Model
GS1020PS2
Type
Installation guide

Cudy GS1020PS2 is a 16-port Gigabit PoE+ switch with 2 Gigabit SFP ports, providing high-speed and reliable network connectivity for your devices. It supports IEEE 802.3af/at PoE standards, with a total power budget of 200W, allowing you to power IP cameras, VoIP phones, and other PoE-compatible devices without the need for separate power adapters.

Cudy GS1020PS2 is a 16-port Gigabit PoE+ switch with 2 Gigabit SFP ports, providing high-speed and reliable network connectivity for your devices. It supports IEEE 802.3af/at PoE standards, with a total power budget of 200W, allowing you to power IP cameras, VoIP phones, and other PoE-compatible devices without the need for separate power adapters.

Specifications
2
Hardware Connection
1
Model GS1020PS2
Network Protocols
PoE Parameters
Network Media
Power Socket
Internet
IEEE802.3 / IEEE802.3u / /IEEE802.3x
IEEE802.3ab / IEEE802.3z
PoE Standard: IEEE802.3af /IEEE802.3at
Max each port: 15.4W ( IEEE 802.3af )
Max each port 30W ( IEEE 802.3at )
PoE compatibility: IEEE 802.3af/at adaptive
PoE port output: DC48-55V
Power Pin : Power over spare pairs 1/2(+) , 3/6 (-)
10BASE-T: Cat 5E UTP(≤250 meter)
100BASE-TX: Cat5 or more UTP (≤100 meter)
1000BASE-TX: Cat5 or more UTP (≤100 meter)
NVR Monitor
Router
36Gbps
8K
4M
26.784Mpps
Power input: AC100-240V 50/60Hz, Output: 52V5.76A
Power Budget: 200W
Operating Temperature: -20℃ ~ 50℃;
Storage Temperature: -40℃ ~ 80℃;
Operating Humidity: Max 90%, non-condensing
Storage Humidity: Max 95%, non-condensing
Working Height: Max to 10,000 feet (3,000 meters)
Storage Height: Max to 10,000 feet (3,000 meters)
Bandwidth
MAC
Packet Buffer Memory
Packet Forwarding Rate
Power Supply
Working Environment
Wireless AP Smart VoIP
IP Camera
Powered Device (PD)
SFP Slot
Power input:
AC100-240V
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15 18 17
Extend(9-16)
Default
VLAN(1-16) 16-Port Gigabit PoE+ Switch
with 2 Gigabit SFP Ports
GS1020PS2
1000M
Act
Act
1000M
2 4 6 8 10 12 14 16 18
1 3 5 7 9 11 13 15 17
LNK/ACT
1000M
PWR
Quick Installation Guide
Model: GS1020PS2
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
Email: support@cudy.com
LED and Interface Explanation
4
PWR
1-16 Port
1-16 Port
Power supply indicator
Red
RJ-45 LINK indicator
Green
RJ-45 ACT indicator
Green
ON
OFF
ON
OFF
ON
OFF
Flashing
Powered
No power
1000M Connect
100M or Disconnect
Connecting
Disconnect
Data Transmit
DIP Explanation
3
VLAN
Default
Extend
Port Isolation
Standard Switch
Link Extension
Downlink designated ports are isolated
from each other, only transmit data with
the uplink port.
All ports communicate freely
The specified port speed drops to 10Mbps,
max PoE transmission distance is 250 meters
Email:
support@cudy.com
Website:
www.cudy.com
  • Page 1 1
  • Page 2 2

Cudy GS1020PS2 Installation guide

GS1020PS2
Cudy
Brand
Cudy
Model
GS1020PS2
Type
Installation guide

Cudy GS1020PS2 is a 16-port Gigabit PoE+ switch with 2 Gigabit SFP ports, providing high-speed and reliable network connectivity for your devices. It supports IEEE 802.3af/at PoE standards, with a total power budget of 200W, allowing you to power IP cameras, VoIP phones, and other PoE-compatible devices without the need for separate power adapters.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents