2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Ninja
  8. Single Rider Golf Electric Scooter

Ninja Single Rider Golf Electric Scooter User manual

  • Hello! I've reviewed the Operation Instruction for the scooter and I'm ready to assist you. This document includes instructions for assembling the scooter, installing various components like the roof, golf rack, battery, and seat. It also covers how to operate the scooter in electric mode. Please feel free to ask me any questions you have.
  • What should be done after inserting the faucet tube?
    What is the next step after putting the battery into the battery compartment?
    How to fix the seat
Operation Instruction
scooter
front windshield
roof bracket
rear support
front support
roof
fastening
Golf rack
M8*70 bolts
install rear support
M8*60 bolts
install the front roof bracket
M8*45 bolts
install the Golf rack
M6*50 bolts
install roof
M6*40-hex bolts
install front support
M6*40-round head bolts
install the glass
Fastening Classification Diagram
seat
charger
battery
Insert the faucet tube.
Grasp the faucet handle and move out of the scooter slowly.
Install the screw of the faucet handle.
Put the battery into the battery
compartment.
Fixed battery.
Connect the battery cable.
Pull the push rod under the seat
to fix the seat.
Install the Golf Stand.
Install two parts as shown
in the figure.
`rear bracket
`Golf rack
Install front support.
Tighten the screws.
Install glass.
Tighten the screws.
Install two parts as shown in the figure. Tighten the screws.
Switch to electric mode.
Turn on the power.
Driving.
Pay attention to the front and rear of the roof.
Install two parts as shown in the figure.
Tighten the screws.
front
rear
/