2. Baby & children
  3. Baby travel
  4. Car seats
  5. Medifab
  6. Starlight-NXT
Starlight-NXT

Medifab Starlight-NXT User guide

  • Hello! I am an AI chatbot trained to assist you with the Medifab Starlight-NXT User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Distributed by
Starliht-NXT
SAFETY FEATURES
Fully adjustable
special purpose
car seat with inbuilt
tilt function
Ensure the
HEADREST
is adjusted as your
child grow taller
5 POINT COMFORT
HARNESS: ensure
this is tightened
suciently through
the grey strap at the
front of the seat
Always uses
VEHICLE SEATBELT
to secure the child
ISOFIX required to be
installed, Starlight-
NXT must be secured
with ISOFIX and
vehicle seatbelt
before travel
SWIVEL BASE pivots to assist with transfers,
ensure the seat is facing forwards and the
release pin is locked in place before travel
QUICK CHECK FITTING GUIDE
Distributed by
Contact the car seat specialists for more information:
0800 543 343
[email protected]
Starlight-NXT
Ensure back is in contact
with the vehicle seat back
Ensure shoulder straps
are firmly secure
Starlight-NXT has two methods of routing
for the vehicle seat belt; behind the
child for weights between 9-18kg and
as a booster seat with the belt over
the front of the child from 15-36kg.
Please consult the user manual for
detailed instructions on how to
restrain your Starlight-NXT.
Distributed by
The quick reference guide does not replace the requirement to read the user manual and safety information therein.
Ensure child has not outgrown
the weight capacity limit
36kg
Installation
• The Starliht-NXT should be installed in the back seat
of a vehicle
• The mandatory points of installation:
– Enaed ISOFIX system
– The seatbelt must be used
– Ensure the Starliht-NXT’s back is in contact with the
vehicle seat back (no bi ap behind headrest).
Use
• Before startin each journey, check the ISOFIX is secured
and ensure the swivel is locked
• Place the child in the seat, ensurin the shoulder straps are
firmly secure and are level with the child’s shoulder heiht.
If these are below the child’s shoulder heiht, the seat needs
to be rown
• Ensure the buckle is done up at the front of the child, you
should hear an audible click
• The harness should then be tihtened usin the rey strap
at the front of the seat to ensure a supportive and snu fit
• Ensure the vehicle seatbelt is used EVERY time and that
the child’s weiht is appropriate for the selected belt path.
Please refer to the labels on the side of the seat or info
in the instruction manual for the appropriate belt path
options and their correspondin weiht capacities.
• If required, use the rey release pin on the side of the base to
swivel the Starliht-NXT. If doin so ensure the seat is locked
in place before travel
• Keep child’s finers clear of movin parts and swivel latches.
• Familiarise yourself with the weiht limit on your child’s seat and
ensure they have not outrown this. For the Starliht-NXT this is
36k
• Periodically check for loose or missin parts.
QUICK CHECK FITTING GUIDE
/