2. Holybro
  3. 31098
31098

Holybro 31098 Operating instructions

  • I have reviewed the datasheet for the Holybro Tekko32 F4 4in1 mini 45A ESC. This document details the product's specifications, including its F4 MCU with BLHELI32 firmware, support for various PWM protocols, and 3-6S lipo input. I am ready to answer your questions about the device.
  • What is the default PWM output?
    What voltage input is supported?
    Is BEC output supported?
    What is the size of this component?
#31098
Tekko32 F4 4in1 mini 45A ESC
SPEC:
F4 MCU with BLHELI32 firmware
Maximum PWM output upto 96K (default 48K)
Amperage meter scale ratio has been adjusted to 168.
PWM input, TLM supported
Voltage output (VBAT)
NO output BEC
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Supports 3-6S lipo input
Ext. cap needed for 6s (1000uf 35v for 6s usage.)
Mounting holes: 20x20mm(M3)
Size:30 x 39 mm
Weight: 7.2g
P a g e | 2 www.holybro.com
PIN MAP:
Package included:
Tekko32 F4 4in1 mini 45A ESC *1
M2 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
Some Tips:
• BLHeli_32 ESC Firmware Overview
• GitHub
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries.
©Copyright 2018 Holybro. All Rights Reserved.
VBAT
TLM
GND
CURRENT
M1
M2
M3
M4
B+
B-
M4
M2
M3
M1
/