Tekko32

Holybro Tekko32 User manual

  • Hello! I have reviewed the datasheet for the Holybro Tekko32 F4 BigFET 4in1 50A ESC. This document details the specifications and features of the ESC, including its F4 MCU, 96K PWM output, 50A continuous current, and support for 4-6S batteries. I'm ready to answer your questions about this product.
  • What is the maximum continuous current of the ESC?
    What battery voltage range is supported?
    What firmware does the ESC use?
    Is an output BEC included?
P a g e | 1 www.holybro.com
#31115
Tekko32 F4 BigFET 4in1 50A ESC
F4 MCU / PWM output up to 96K / 4~6S / BLHELI32
Tekko32 F4 BigFET are made for those that uses 20x20 mount and also need the power of big MOSFET.
The F4 MCU & quality big MOSFET onboard will provide smooth control, quick response, and big power
for racers and freestyle pilots.
Features:
New F4 MCU, much faster than F3 & F0
PWM output up to 96K (default 48K)
20x20 Mount design with big MOSFET
Separate drive & control circuit, this broadens the current capability of the drive circuit while
reducing the electrical interference to the control circuit.
Specification:
Continuous Current: 50A x4
Burst Current: 60A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 168
Dimensions: 39x36.5x6mm / Weight: 11.8g
Mounting holes: M4 30.5x30.5mm (M3 grommets included)
P a g e | 2 www.holybro.com
Pin Map:
Package includes:
Tekko32 F4 BigFET 4in1 50A ESC *1
M3 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacitor: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
Some Tips:
BLHeli_32 ESC Firmware Overview
GitHub
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries.
©Copyright 2018 Holybro. All Rights Reserved.
/