Cactus CAC-136 is a versatile smartwatch that offers a range of features to help you stay active and connected. With its built-in pedometer, you can track your steps, distance covered, and calories burned during your workouts. The device also monitors your sleep quality and provides reminders for alarms, messages, and incoming calls. Additionally, it can measure your heart rate, blood pressure, and blood oxygen levels. The watch is water-resistant (IP67), so you can wear it while washing your hands or exercising in the rain.
Cactus CAC-136 is a versatile smartwatch that offers a range of features to help you stay active and connected. With its built-in pedometer, you can track your steps, distance covered, and calories burned during your workouts. The device also monitors your sleep quality and provides reminders for alarms, messages, and incoming calls. Additionally, it can measure your heart rate, blood pressure, and blood oxygen levels. The watch is water-resistant (IP67), so you can wear it while washing your hands or exercising in the rain.
NEXUS
User Manual
SOFTWARE COMPATIBILITY
www.cactuswatches.com
iOS 8.0 & Above Android 4.4 & Above Supports Bluetooth 4.0
& Above
Getting Started
1. Download AdorHealth App
Search and download the AdorHealth App from the Apple
Store or Android App store
OR
Scan the QR code below to download and install
AdorHealth
TFT Screen
Magnetic Charge
Contact
Button
Light Sensor
01
2. Charging your Device
Use the supplied cable and attach the magnetic end to
the charging points on the back of the watch, then
connect the USB plug to a suitable power supply (PC or
charger). Charge fully before first use.
You are now ready to wear the CACTUS NEXUS – adjust
the length of the band and fasten the device around your
wrist.
3. How to Use
The activity tracker is a multi-touch device. The touch
keys (unmarked) are situated at the top and the bottom
of the screen on the watch. Alternately one can operate
the device using the 2 buttons on the side of the watch.
Power on: Long press the touch key to power on. The
device will vibrate and display the main interface.
Tap to toggle the current page to the next page / move
across the options on the current page.
Long press the touch key to enter or confirm an option.
Using the 2 buttons on the side of the watch, the top
button operates as the tap key, and the bottom button as
the long press key.
02
4. Pairing your Device
Make sure Bluetooth is ON in your smart phone, and
open the AdorHealth app on your smart phone.
Give consent / allow Bluetooth on the App. Complete
your personal details in the App to calibrate the device –
gender, age, weight, height, step goals, sleep goals.
To connect/pair the device with your smart phone, follow
the steps below:
Please ensure that the App is opened daily so that
synchronization of data can occur, and historical data can
be viewed in the App.
Please do NOT directly search for the device in the
Bluetooth list in your phone settings, when pairing. You need
to enter the App to search for the connection and pair.
5. Key Features
Steps Distance Calories Sleep
03
Blood
Pressure
Blood Oxygen Sport Stop Watch
Message
Alarm
Always on Display
Find Device Heart Rate
More
Functions
1. Sleep mode
• The device automatically measures sleep time and
quality if worn during sleep.
• Press the screen repeatedly, until the following screen
appears.
04
2. Exercise mode
• Note: The distance is calculated by your stride length
based on personal configuration and number of steps.
• The daily step count on the device starts from zero every
day at 00:00h. All sports data is cleared from the device
daily at 00.00h (message notifications are not cleared).
Once you connect the device via the app with your
mobile phone, data will be stored for further monitoring.
• The app also provides a GPS and running function. The
GPS function visualizes the covered track, the distance
covered, time, average speed and calories consumed.
3. Health Measurements
• The device allows you to measure heart rate, blood
pressure and blood oxygen. You can measure only from
the device. The data will be automatically synchronized
to the APP on the phone. Tap the touch key repeatedly,
until the desired measurement screen appears. At the
rear of the device a green light beam appears and
measurement begins.
Walking Running Cycling
05
4. Stopwatch
• Press the screen repeatedly, until the following screen
appears.
• Press and hold the button until the stopwatch appears.
• Press again to start/stop the time.
• Press and hold the central button to turn o the
stopwatch.
5. Remote Camera Activation
• When selecting the remote camera shoot option in the
app, your mobile phone’s camera is activated with a
shake of the device.
Heart Rate Blood Pressure Blood Oxygen
06
6. Alarms
• The device allows you to set multiple alarms (these can
be daily reminders or weekly). The activated alarm is a
vibration alert on the device.
7. Bright Screen Setting
8. App Functions
• App functions may be aected by future updates on the
App.
07
Power o
• Press / tap the screen until you reach the screen
interface More, long press to enter the options, press /
tap until your reach Power o, press and hold for the
device to turn o.
Intended Use
This smart device is intended for monitoring fitness-
related metrics such as heart-rate, blood pressure, blood
oxygen, distance walked or run, calorie consumption and
quality of sleep. Data measured should not be used for
any medical, ambulatory or dietary reference.
This device is an electronic monitoring product, NOT a
medical device, and measurement data is for personal
reference only.
Common troubleshooting
Please ensure that the device is fully charged and
powered on.
For pairing / connection considerations, please ensure
that the device is scanned in the APP to connect, do not
directly search for the connection to the device in the
phone settings; you need to enter the App to search for
the connection.
1. Make sure your phone’s operating system is iOS 8.0 &
above or Android 4.4 & above
08
2. Turn o the phone’s Bluetooth and then turn it on
3. Reboot the mobile phone and ensure that Bluetooth is on
4. Do not connect other Bluetooth devices at the same time
5. Put the device close to the phone. Make sure that the
distance between the device and the phone is less than
50cm
6. If you have an Android phone, and you can’t find the
device in the App when trying to connect, please check
whether the AdorHealth App has been allowed in the
App permissions on your Android phone.
Basic Specifications
Model No.: CAC-136
CPU: Telink 8266
0.96 inch TFT display
Lithium battery 200mAh
Standby time: up to 14 days
Operating time: up to 7-10 days
Compatible with IOS 8.0 and Android 4.4 or higher
Charging cable included
Protection class: Water and dust resistant (IP67)
Do not swim with the device
Caution
• The product contains electrical
components that could cause injury if not
handled properly.
• Do not open the enclosure or
disassemble the product.
• Do not expose the product to extremely
high or low temperatures.
• Do not use the product in a sauna or steam room.
09
• Do not leave the product in direct sunlight for an
extended period of time.
• Do not dispose of the product in a fire, the built-in
battery can explode.
• The product features a built-in battery, which is not user
replaceable.
• Do not check call notifications or other data on the
product’s screen while driving or in other situations
where distractions could be hazardous.
• The distance travelled may be inaccurate. It is for
reference only and should not be used as any
navigational reference.
• The product should usually rest a finger’s width below
the wrist bone, as you would normally wear a watch.
• Prolonged contact may contribute to skin irritation or
allergies in some users. If you notice any skin irritation,
please discontinue using the product.
WARRANTY
This product is warranted to be free from defects in
materials and workmanship for a period of 1 year from
date of purchase. This warranty covers manufacturing and
mechanical defects but excludes band and lens damage.
www.cactuswatches.com
10
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Cactus CAC-136 is a versatile smartwatch that offers a range of features to help you stay active and connected. With its built-in pedometer, you can track your steps, distance covered, and calories burned during your workouts. The device also monitors your sleep quality and provides reminders for alarms, messages, and incoming calls. Additionally, it can measure your heart rate, blood pressure, and blood oxygen levels. The watch is water-resistant (IP67), so you can wear it while washing your hands or exercising in the rain.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Amazfit GTS 4 Owner's manual
-
Amazfit Cheetah Pro Owner's manual
-
Amazfit T-Rex Ultra Owner's manual
-
iTOUCH Slim User manual
-
Amazfit Band 7 Fitness Tracker Smart Watch User manual
-
AGPtek W06 User manual
-
MIXX WatchCore User guide
-
MIXX WATCH2 User guide
-
LISKA SV-33FC Operating instructions
-
Vivitar TYL-5402 User manual
