Shimano E-TUBE RIDE User manual

Brand: Shimano

Model: E-TUBE RIDE

Type: User manual

Shimano E-TUBE RIDE lets you customize settings, monitor riding data, and connect with a compatible Shimano Steps e-bike or Di2 electronic shifting system. Track your rides with GPS and view key metrics like speed, distance, and gear position on your smartphone. Use the app to adjust motor assist levels, customize shifting preferences, and even diagnose system errors.

(English) UM-7J50A-002

User's Manual

E-TUBE RIDE

Check our website for the latest

manuals.

https://si.shimano.com

CONTENTS

IMPORTANT NOTICE.......................................................................4

TO ENSURE SAFETY .......................................................................5

This manual ...................................................................................6

Starting E-TUBE RIDE for the ﬁrst time.......................................7

Starting E-TUBE RIDE ..................................................................11

Setting the sensor connection...................................................17

View screen .................................................................................21

Supported operating systems ....................................................................6

Supported Bluetooth

version ................................................................... 6

Supported models ....................................................................................... 6

Adding a sensor.........................................................................................17

• Setting up a sensor.......................................................................................................................... 19

Switching the view screen........................................................................21

Icons displayed on the view screen .........................................................22

Item screen................................................................................................. 26

Speed meter/assist power meter .............................................................32

Detailed gear information ........................................................................ 33

Map screen.................................................................................................34

Log view screen.........................................................................................39

• Left swipe (from right to left) ........................................................................................................21

• Right swipe (from left to right)......................................................................................................21

• Customizing the displayed items ...................................................................................................27

• Description of the map screen .......................................................................................................35

• Operations on the map screen .......................................................................................................36

• Displaying guidance route.............................................................................................................. 38

• Switching the log view screen........................................................................................................40

Preferences..................................................................................42

Information display....................................................................53

Alerts ...........................................................................................54

Screen display while traveling ..................................................57

Error/warning code.....................................................................58

• Description of the log details screen .............................................................................................40

Displaying the menu screen ..................................................................... 42

Setting the language ................................................................................ 43

Setting the units........................................................................................44

Setting linking with Strava.......................................................................44

Setting beeps.............................................................................................45

Setting the sleep .......................................................................................46

Setting the assist power display ..............................................................46

Setting the gear details display ............................................................... 47

Setting app operations via switch ...........................................................47

Resetting the settings ............................................................................... 49

Managing ofﬂine map .............................................................................. 51

Setting the map function..........................................................................51

Logging in to SHIMANO ID PORTAL.........................................................52

Derailleur adjustment ...............................................................................53

RD protection reset ................................................................................... 53

Maintenance alert .....................................................................................54

Warning alert............................................................................................. 55

Error alert................................................................................................... 56

IMPORTANT NOTICE

The following instructions must be observed at all times in order to prevent personal injury

and physical damage to equipment and surroundings.

The instructions are classiﬁed according to the degree of danger or damage which may occur

if the product is used incorrectly.

DANGER

Failing to follow this instruction will cause death or serious injury.

WARNING

Failing to follow this instruction may cause death or serious injury.

CAUTION

Failing to follow this instruction may cause injury or physical

damage to equipment or the environment.

IMPORTANT NOTICE

TO ENSURE SAFETY

WARNING

NOTICE

• When using this application, securely attach your smartphone to a position near the bicycle

handlebar with the dedicated holder and ensure that you grasp the handlebar securely with

both hands.

• Do not stare at the screen while riding. Doing so will distract you from the front of the bicycle

and is dangerous.

• SHIMANO will not be held responsible for any damage to the smartphone holder that may

occur while using this application.

• Using this application increases smartphone battery consumption. Take note of the battery

level during use.

TO ENSURE SAFETY

This manual

This user's manual describes how to use E-TUBE RIDE.

The screen images used are the screens displayed on an iOS device.

Supported operating systems

Supported Bluetooth

version

Supported models

Traveling can be recorded and saved without connecting to the bicycle via Bluetooth

LE.

*The application cannot connect to the SC-E8000 or SC-E5000.

NOTICE

- Android：Ver.6.0 or later

- iOS：iOS11 or later

- Version 4.1 or later

- SC-E6100

- SC-E7000

- SC-EM800

- EW-EN100

- EW-WU111

- EW-WU101

- SC-M9051

- SC-MT800

• There are functions that may not be available depending on the countries/regions or OS

being used.

This manual

Supported operating systems

Starting E-TUBE RIDE for the ﬁrst

time

1. After installing E-TUBE RIDE, tap the E-TUBE RIDE icon ( ).

The country/region selection screen is displayed.

Default provinces and countries/regions are displayed based on your smartphone's ID

information.

2. Select the provinces and countries/regions you will use, and tap [OK].

The SHIMANO ID PORTAL login screen is displayed.

Starting E-TUBE RIDE for the ﬁrst time

NOTICE

3. Tap [LOGIN].

If you have not registered a SHIMANO ID, tap [NEW REGISTRATION].

The SHIMANO ID PORTAL screen is displayed.

• If the region does not support SHIMANO IDs, the terms of use screen is displayed.

Conﬁrm the terms of use, select [Agree], and tap [Next]. Proceed to step 5 .

Starting E-TUBE RIDE for the ﬁrst time

NOTICE

4. Log in or register as a new user.

Follow the instructions on the SHIMANO ID PORTAL screen.

The notice screen is displayed when the login operation is complete.

5. Conﬁrm the displayed information, and tap [Agree].

The connection screen is displayed. Proceed to step 3 of “ Starting E-TUBE RIDE ”.

• If you tapped [Skip] and did not log in, the terms of use screen is displayed. Conﬁrm the

Starting E-TUBE RIDE for the ﬁrst time

NOTICE

• Select [Do not show this next time] to hide the notice screen from the next time E-TUBE

RIDE is started.

Starting E-TUBE RIDE for the ﬁrst time

Starting E-TUBE RIDE

NOTICE

Bicycle type Method

E-BIKE

The bicycle goes into the waiting for connection state after the

following operations:

Other than E-BIKE

The bicycle goes into the waiting for connection after

performing gear shifting operations.

*If you cannot connect after performing gear shifting operations, perform the following

operations. The bicycle goes into the waiting for connection state for about 30 seconds after

the battery is remounted or the electric wires are reconnected to the wireless unit.

• To connect to E-TUBE RIDE, the bicycle must be put into a waiting for connection state.

Refer to the table and put the bicycle into the waiting for connection state.

• For 30 seconds after the E-BIKE main power supply is turned

• For 30 seconds after one of the buttons/switches (except for

the E-BIKE main power supply button) is operated

■ In the case of an external battery

Check that the electric wires are connected to the wireless unit, then remove and remount

the external battery.

■ In the case of a built-in battery

Check that the electric wires are connected to the wireless unit, then remove the electric

wires (two wires) from the wireless unit and reconnect them.

1. Tap the E-TUBE RIDE icon ( ).

The notice screen is displayed.

Starting E-TUBE RIDE

2. Conﬁrm the displayed information, and tap [Agree].

E-TUBE RIDE connects to the same bicycle and wireless unit as the last time it was used, then

the view screen is displayed.

If the connection fails or a Bluetooth

LE connection was not used last time, the connection

screen is displayed. Proceed to step 3 .

NOTICE

• Select [Do not show this next time] to hide the notice screen from the next time E-TUBE

RIDE is started.

Starting E-TUBE RIDE

3. Tap [Connect] for the bicycle to connect to.

The view screen is displayed.

Starting E-TUBE RIDE

NOTICE

• Tap the connection status icon ( ) on the view screen to display the Bluetooth

setting screen.

Tap [Disconnect] to disconnect from the bicycle and wireless unit.

• Select [Do not show this screen again at startup] to hide the connection screen from

the next time E-TUBE RIDE is started.

• If a bicycle has not been registered in E-TUBE PROJECT or you have not logged in with a

SHIMANO ID, connect to the wireless unit on the connection screen.

Starting E-TUBE RIDE

• To connect to the wireless unit instead of a registered bicycle, tap [Connect from

wireless unit] on the connection screen.

• Tap [How to connect your bicycle] on the connection screen to check the connection

settings on the bicycle side.

Starting E-TUBE RIDE

• The tutorial screen is displayed when starting for the ﬁrst time. Conﬁrm the displayed

information, and tap [OK].

Starting E-TUBE RIDE

Setting the sensor connection

Connect and conﬁgure the speed sensor and cadence sensor.

Adding a sensor

Only one speed sensor and one cadence sensor can be connected at the same time. For an

integrated speed and cadence sensor, only that sensor can be connected.

1. Tap [Add sensor] on the connection screen.

The screen for adding a sensor is displayed.

Setting the sensor connection

Adding a sensor

2. Tap [Add] for the sensor to add.

NOTICE

• A conﬁrmation screen is displayed if you try to add a sensor with the same functions as

a sensor that is already connected, etc. Select which sensor to connect to.

Setting the sensor connection

Adding a sensor

Setting up a sensor

Change the name of the sensor, etc. It can only be changed when connected to the sensor.

1. On the connection screen, tap the sensor to change the settings.

The sensor setting screen is displayed.

NOTICE

• You can check the sensor's remaining battery life on the connection screen.

Setting the sensor connection

Adding a sensor

2. Change the name and circumference.

NOTICE

• Tap [Delete] on the sensor setting screen to delete it from the list of registered sensors.

If it is currently connected it will be disconnected.

Setting the sensor connection

Adding a sensor

Page is loading ...

Shimano E-TUBE RIDE User manual

Shimano E-TUBE RIDE User manual

Shimano E-TUBE RIDE User manual

Related papers

Other documents