Motorola TETRA MTP3550 Training

Type
Training
MTP3550 Terminal Training
2
Power On/Off
Powering On
Press and hold the On-Off/End/Home key
MTP3550 performs a self-check and system
registration routine.
The display shows additional information
while the MTP3550 is registering on the
system.
Powering Off
Press and hold the On-Off/End/Home key.
You will hear an audible beep and see the
Powering Off message
Page Ref FUG - 12
3
Talkgroup Selection
You can select a Talkgroup in
one of the following ways:
Rotary knob
Navigation key
Alphabetical search feature
Folder search
Numeric keypad entry -
Speed Dialing (index)
My Groups
Page Ref FUG - 34
4
Group Call Operations
Making a Group Call
(Push to Talk Release to Listen)
Select required Talkgroup.
Press and hold PTT.
Wait for Talk Permit Tone and
then speak.
Release PTT to listen.
Page Ref FUG - 38
5
Group Call Operations (DMO)
Initiate DMO Group Call
Change to Direct Mode
Operation
Select chosen Talkgroup
Press and hold the PTT
Wait for the talk permit
tone and speak
Release the PTT button
to listen.
6
Individual Call Operations
Making a Call
Menu 4 displays private ISSI
Enter required ISSI on keypad
(or access from phonebook)
Press PTT to make call
Answering the Call
When radio rings - Press PTT to answer
You can then have a one-to-one
conversation. Remember:
Push to Talk, Release to listen.
Page Ref FUG - 38
Short Code Keys
Transmit Inhibit - Hold 1 Key
ON/OFF
Direct Mode ( off network
2KM line of site ) Hold 2 Key
ON/OFF
Covert Mode Hold 5 Key
ON/OFF
Screen turn upside down
Hold 0 Key ON/OFF
8
LED INDICATOR
LED Description
Solid green In use
Flashing green In service
Solid red Out of service
Flashing red Connecting to a network at power
on
Solid orange Transmit Inhibit active Channel
busy in DMO
Flashing orange Incoming call
No indication Switched off or Covert Mode
LED Indicator
Page Ref FUG - 17
9
Message Operations
Press Menu key
Select Messages
Select New Message
Type message
Click OK
Select mail recipient from Contact List
or enter ISSI number
Select Send
Page Ref FUG - 128
10
Emergency Call Operations (TMO)
To initiate Emergency Mode:
Push and hold the Emergency
Key until Emergency Mode
starts
0.5 seconds
To exit Emergency Mode:
Push and hold the Exit Key until
Emergency Mode stops
2.0 seconds
Page Ref FUG - 67
Exit
Emgy In Use
Water Services
Optns Exit
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Motorola TETRA MTP3550 Training

Type
Training

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI