Adlink cPCI-6620/655L User manual

Advance Technologies; Automate the World.

Manual Rev. 2.00

Revision Date: November 7, 2012

Part No: 50-15083-1000

cPCI-6620 Series

6U CompactPCI Processor Blade

with 2nd Generation Intel

®

Core™ i7/Celeron

®

User’s Manual

Revision History

Revision Release Date Description of Change(s)

2.00 2012/11/7 Initial release

Preface iii

cPCI-6620

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's Restriction of Hazardous Substances (RoHS) direc-

tive and Waste Electrical and Electronic Equipment (WEEE)

directive. Environmental protection is a top priority for ADLINK.

We have enforced measures to ensure that our products, manu-

facturing processes, components, and raw materials have as little

impact on the environment as possible. When products are at their

end of life, our customers are encouraged to dispose of them in

accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv Preface

Using this Manual

Audience and Scope

The cPCI-6620 User’s Manual is intended for hardware

technicians and systems operators with knowledge of installing,

configuring and operating industrial grade CompactPCI modules.

Manual Organization

This manual is organized as follows:

Chapter 1, Overview: Introduces the cPCI-6620, its features,

block diagrams, and package contents.

Chapter 2, Specifications: Presents detailed specification

information, and power consumption.

Chapter 3, Functional Description: Describes the cPCI-6620’s

main functions.

Chapter 4, Board Interfaces: Describes the cPCI-6620 board

interfaces, pin definitions, and jumper settings.

Chapter 5, Getting Started: Describes the installation instructions

of the cPCI-6620.

Chapter 6, Drivers & Utilities: Describes the driver installation

procedures.

Chapter 7, BIOS Setup Utility: Describes the AMI EFI BIOS

setup utility.

Important Safety Instructions: Presents safety instructions all

users must follow for the proper setup, installation and usage of

equipment and/or software.

Getting Service: Contact information for ADLINK’s worldwide

offices.

Preface v

cPCI-6620

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

vi Preface

This page intentionally left blank.

Table of Contents vii

cPCI-6620

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

List of Tables.......................................................................... ix

List of Figures........................................................................ xi

1 Overview ............................................................................. 1

1.1 Introduction.......................................................................... 1

1.2 Features............................................................................... 2

1.3 Block Diagram ..................................................................... 2

1.4 Product List.......................................................................... 3

1.5 Package Contents ............................................................... 4

2 Specifications..................................................................... 5

2.1 cPCI-6620 Specifications..................................................... 5

2.2 I/O Connectivity ................................................................... 7

2.3 Power Requirements........................................................... 8

3 Functional Description .................................................... 11

3.1 Processors......................................................................... 11

3.2 Platform Controller Hub ..................................................... 13

3.3 Intel® Turbo Boost Technology......................................... 14

3.4 Intel® Hyper-Threading Technology.................................. 14

3.5 Battery ............................................................................... 15

4 Board Interfaces............................................................... 17

4.1 cPCI-6620 Series Board Layout........................................ 17

4.2 cPCI-6620 Assembly Layout ............................................. 18

4.3 cPCI-6620 Front Panel...................................................... 19

4.4 Connector Pin Assignments .............................................. 20

4.5 Switches ............................................................................ 26

viii Table of Contents

5 Getting Started.................................................................. 27

5.1 CPU and Heatsink ............................................................. 27

5.2 Memory Module Installation............................................... 27

5.3 SATA Drive Installation...................................................... 28

6 Drivers & Utilities.............................................................. 31

6.1 Driver Installation Procedure.............................................. 31

7 BIOS Setup Utility............................................................. 37

7.1 Starting the BIOS............................................................... 37

7.2 Main Setup......................................................................... 40

7.3 Advanced BIOS Setup....................................................... 41

7.4 Chipset Configuration ........................................................ 54

7.5 Boot Configuration............................................................. 61

7.6 Security Setup.................................................................... 62

7.7 Save & Exit ........................................................................ 63

Important Safety Instructions............................................... 65

Getting Service...................................................................... 67

List of Tables ix

cPCI-6620

List of Tables

Table 2-1: cPCI-6620 Specifications ......................................... 6

Table 2-2: cPCI-6620 I/O Connectivity ...................................... 7

Table 2-3: CompactPCI Input Voltage Characteristics .............. 8

Table 4-1: cPCI-6620 Front Panel Status LED Descriptions ... 19

Table 4-2: USB Connector Pin Definition ................................ 20

Table 4-3: GbE Connector Pin Definitions ............................... 21

Table 4-4: COM1~2 Connector Pin Definition ......................... 22

Table 4-5: DVI-D Connector Pin Definition .............................. 22

Table 4-6: SATA Direct Connector Pin Definition .................... 23

Table 4-7: CompactPCI J1 Connector Pin Definition ............... 24

Table 4-8: CompactPCI J2 Connector Pin Definition ............... 25

xList of Tables

This page intentionally left blank.

List of Figures xi

cPCI-6210

List of Figures

Figure 1-1: cPCI-6620 Series Block Diagram.............................. 2

Figure 4-1: cPCI-6620 Series Board Layout.............................. 17

Figure 4-2: cPCI-6620 Assembly Layout................................... 18

Figure 4-3: cPCI-6620 Front Panel Layout................................ 19

xii List of Figures

This page intentionally left blank.

Overview 1

cPCI-6620

1Overview

1.1 Introduction

The cPCI-6620 is a highly integrated 6U CompactPCI blade in

dual slot width (8HP) form factor. Its design is based on the 2nd

Generation Intel® Core™ i7 and Celeron® processors in

FCBGA1023 package with Mobile Intel® HM65 Express Chipset.

The cPCI-6620 is a value 6U CompactPCI blade that offers inte-

grated graphics, I/O bandwidth, asset management capabilities,

data transfer speed and reliability.

The cPCI-6620 supports dual-channel unbuffered

DDR3-1066/1333 memory up to a maximum capacity of 16GB.

Graphics is integrated in the processor and output is provided

through one DVI-D port on the front panel.

The cPCI-6620 offers versatile I/O such as four Gigabit Ethernet

ports, two DB-9 COM ports, four Type-A USB 2.0 ports, and one

DVI-D port on the front panel. The blade supports a 32-bit/33MHz

CompactPCI interface and integrates a Super I/O IT8718F to mon-

itor CPU and system temperature, DC voltages and provide a

watchdog timer.

Storage features of the cPCI-6620 include a SATA 6 Gb/s direct

connector interface with mounting space for a 2.5" HDD/SSD.

2Overview

1.2 Features

X Supports dual-core Intel® Core™ i7-2655LE processor

X Up to 16GB DDR3-1333 memory in two DIMMs

X Supports real-time RTX on Windows

X Four Gigabit Ethernet egress ports

X 5V power input only

1.3 Block Diagram

Figure 1-1: cPCI-6620 Series Block Diagram

F

R

O

N

T

P

A

N

E

L

USB 0/1/2/3

DMI

COM1

,

COM2

PCIe x1

LAN3

2

nd

Gen

Intel®

Core™ i7

J1/J2

Intel

82574L

LAN1

SATA0

LPC

Intel

82574L

2.5” HDD

BIOS

SPI

240pin DIMM

CHB

CHA

IT8718F

TI XIO2001IZ

PCIe x1

FDI

PCIe x1

Intel

82574L

LAN2

DVI

PCIe x1

HM65

PCH

240pin DIMM

Intel

82574L

PCIe x1 LAN4

DDR3 1066/1333

PCI 32b/33M

CH7318C

TMDS

Overview 3

cPCI-6620

1.4 Product List

Products in the cPCI-6620 Series include:

Processor Blade

X cPCI-6620/655L: 8HP (dual slot) 6U CompactPCI featuring

Intel® Core™ i7-2655LE Processor; up to 16GB

DDR-1066/1333; GbE x4, COM x2, DVI-D, USB x4,

onboard SATA connector

X cPCI-6620/847E: 8HP (dual slot) 6U CompactPCI featuring

Intel® Celeron™ 847E processor; up to 16GB

DDR-1066/1333; GbE x4, COM x2, DVI-D, USB x4,

onboard SATA connector

X cPCI-6620/810E: 8HP (dual slot) 6U CompactPCI featuring

Intel® Celeron™ 810E Processor; up to 16GB

DDR-1066/1333; GbE x4, COM x2, DVI-D, USB x4,

onboard SATA connector

4Overview

1.5 Package Contents

The cPCI-6620 is packaged with the components listed below. If

any of the items in the contents list are missing or damaged, retain

the shipping carton and packing material and contact the dealer

for inspection. Please obtain authorization before returning any

product to ADLINK. The packing contents of non-standard config-

urations may vary depending on customer requests.

Processor Blade

X The cPCI-6620 Series Processor Blade

Z CPU and memory specifications will differ depending on

options selected

Z Thermal module is assembled onboard

X 2.5" SATA drive accessory pack

X ADLINK All-in-One DVD

X User's manual

NOTE:

The contents of non-standard cPCI-6620 Series configurations

may vary depending on customer requests.

CAUTION:

This product must be protected from static discharge and phys-

ical shock. Never remove any of the components except at a

static-free workstation. Use the anti-static bag shipped with the

product when putting the board on a surface. Wear an

anti-static wrist strap properly grounded on one of the system's

ESD ground jacks when installing or servicing system compo-

nents.

Specifications 5

cPCI-6620

2 Specifications

2.1 cPCI-6620 Specifications

CompactPCI

Standard

PICMG® 2.0 CompactPCI® Rev. 3.0

Mechanical

Standard 6U CompactPCI®

Board size: 233.23 mm x 160mm

Dual slot (8HP, 40.64 mm) width

CompactPCI® connectors J1, J2

Processor

2nd Generation Intel® Core™ processor in FCBGA1023

package with passive heatsink

• Intel® Core™ i7-2655LE, 2.2GHz, 4MB LLC, 25W

• Intel® Celeron® B810E, 1.6GHz, 2MB LLC, 35W

• Intel® Celeron® 847E, 1.1GHz, 2MB LLC, 17W

Chipset Intel® HM65 Platform Controller Hub (PCH)

Memory

Dual channel unbuffered DDR3-1066/1333 memory

Two 240-pin DIMM sockets

Up to 16GB

CompactPCI Bus

PCI 32-bit/33MHz; 3.3V, 5V universal V(I/O)

Supports operation in system slot only

Ethernet

Four PCIe x1 Intel® 82574L Gigabit Ethernet controllers

Four RJ-45 LAN ports on front panel

Graphics

Intel® HD Graphics integrated in processor

One DVI-D port on front panel

Supports DirectX 10.1, OpenGL 3.0

Serial Ports Two DB-9 RS-232 ports from Super I/O ITE IT8718F

Storage One 2.5" SATA 6 Gb/s direct connector onboard

Hardware Monitor

Integrated in Super I/O IT8718F

Monitors CPU and system temperature, DC voltages

Watchdog Timer

System reset and NMI, with programmable interval, 1-65535

sec/min

BIOS

AMI® EFI BIOS 64Mbit SPI flash memory

PXE Boot agent supported on front panel GbE ports

6 Specifications

Table 2-1: cPCI-6620 Specifications

Faceplate I/O

4x USB 2.0 ports (Type-A)

4x RJ-45 LAN ports

1x DVI-D port

2x DB-9 COM ports

HDD Status LED (yellow)

Power Status LED (green)

Reset button

Battery BR2032 in battery socket

OS Support Windows XP/7 Embedded + RTX extension

Environmental

Operating Temperature: 0°C to 60°C

Storage Temperature: -40°C to 85°C

Operating Humidity: 95% non-condensing

Non-Operating Humidity: 95% non-condensing

Shock 15G peak-to-peak, 11ms duration, non-operating

Vibration

4

Operating: 2Grms. 5 to 500Hz, each axis (without HDD)

Power

Requirement

5V DC power only

Power consumption: 18.5 W

Compliance CE, FCC Class A

NOTE:

Specifications are subject to change without prior notice.

Specifications 7

cPCI-6620

2.2 I/O Connectivity

cPCI-6620 Processor Blade

Table 2-2: cPCI-6620 I/O Connectivity

Notes:

1. One 22-pin direct connector for 2.5" SATA drive.

2. Power (green), Hard Disk (yellow)

Function Faceplate Board

COM (RS-232) Y x2 —

LAN Y x4 —

USB 2.0 Y x4 —

DVI-D Y —

SATA

Y

1

LEDs

2

Y x2 —

Reset Button Y —

Clear CMOS Button — Y

8 Specifications

2.3 Power Requirements

In order to guarantee a stable functionality of the system, it is rec-

ommended to provide more power than the system requires. An

industrial power supply unit should be able to provide at least

twice as much power as the entire system requires of each

voltage. An ATX power supply unit should be able to provide at

least three times as much power as the entire system requires.

The tolerance of the voltage lines described in the CompactPCI

specification (PICMG 2.0 R3.0) is +5%/ -3% for 5, 3.3 V and ±5%

for ±12V. This specification is for power delivered to each slot and

it includes both the power supply and the backplane tolerance.

Table 2-3: CompactPCI Input Voltage Characteristics

Voltage

Nominal

Value

Tolerance

Max. Ripple

(P - P)

5V +5.0 VDC +5% / -3% 50 mV

3.3V +3.3 VDC +5% / -3% 50 mV

+12V +12 VDC +5% / -5% 240 mV

-12V -12 VDC +5% / -5% 240 mV

V I/O (PCI I/O

Buffer Voltage)

+3.3 VDC or

+5 VDC

+5% / -3% 50 mV

GND

Page is loading ...

Adlink cPCI-6620/655L User manual

This manual is also suitable for

Adlink cPCI-6620/655L User manual

Related papers

Other documents